Incubators
Items 1 to 20 of 24
£ 262.50 (ex. VAT) 1 in stock
New Brunswick Scientific Innova 4430 Incubator Shaker Lab - Spares / Repairs
ITEM-14875
This New Brunswick Scientific Innova 4430 Incubator Shaker was removed from a university where it was surplus to requirements.
The unit has been powered up and tested and it does appear to be able to hold a temperature. It was tested at 37degC where our thermometer showed 33degC and was tested up to max temp of 80degC. Our thermometer showed 79degC.
The shaker parts appear to have been removed, although when setting an rpm on the controls, you can see the motor spin up.
It is in reasonable cosmetic condition but has seen heavy use. Despite the way it looks, and that some parts are missing it actually seems to work really well. It will require some work and new parts to get the unit fully working again.
Unit is sold as spares / repairs.
£ 90.00 (ex. VAT) 1 in stock
3x Perforated Stainless Steel Lab Incubator Rack / Shelves Parts 50x50cm
ITEM-13753
These Stainless Steel Incubator Racks were removed from a university as part of a clearance.
They are all 50x50cm in size and are in very good condition.
£ 105.00 (ex. VAT) 1 in stock
Amersham Amerlite Microtitre Plate Air Incubator Lab
ITEM-13669
This Microtitre Plate Incubator was removed from a university where it was surplus to requirements.
The unit powered on in testing and heated up (see photos).
The unit has closed temperature control with a temp range of 20-50 degrees. the two chamber spaces are both 127x210x20mm LWH.
£ 482.27 (ex. VAT) 1 in stock
Appligene Oncor Crocodile III TC2000 Microprocessor Controlled Incubation System
ITEM-12172
This item was removed from a lab as surplus to requirements.
The lab manager informed us it was in full working order when last used.
At our site we have powered it on but not tested it further.
£ 375.00 (ex. VAT) 1 in stock
BINDER KB115 Laboratory Cooling/Warming Incubator -5°C to +100°C - Spares Repair
ITEM-11638
BINDER KB 115 Laboratory Cooling/Warming Incubator Temperature range: -5°C to +100°C
Originated in a working laboratory in a top UK university.
This unit is in excellent condition and looks like new.
However, the unit randomly powers itself off when in operations. It did this about three times across an hour whilst trying to heat to 37C. We do not know why the unit is powering itself off so is sold as spares / repairs.
£ 628.76 (ex. VAT) 1 in stock
Carbolite PIF60 (201) 110C Fanned Convection Incubator Oven Lab
ITEM-07187
This unit was removed from a lab as surplus to requirements.
It is in good working order and reached 110C and verified against our temp probe (not included).
£ 220.96 (ex. VAT) 1 in stock
Heidolph Inkubator 1000 Lab Incubator with Hood
ITEM-06115
Heidolph Inkubator 1000 Lab Incubator with Hood
This item originated in a working Lab in a top UK University and has come to us as part of a Lab Clear Out.
The unit comes with the large incubation hood.
Incubator heating model: 549-90010-00
Incubator serial number: 109500047
300W up to 60°C
Hood model: 549-90030-00
£ 151.88 (ex. VAT) 1 in stock
Heraeus Instruments Heracell 150 CO2 Incubators Lab - Spares / Repairs
ITEM-12664
This unit was removed from a lab as part of a replacement / upgrade programme.
The incubator powers on and heats and holds temp at 40C. We have not tested the CO2 function.
The door hinges are not quite square and so the door becomes loose when moved - the door seal is slightly broken, and so the door doesn't shut tightly.
The inside is heavily rusted / oxidised as shown in photo.
Unit probably works fine - but needs a refurbishment so is sold as spares / repairs.
£ 337.50 (ex. VAT) 1 in stock
Hybaid Shake 'n' Stack Hybridization Oven / Incubator + Orbital Rack Lab
ITEM-13733
This Hybaid Shake 'n' Stack was removed from a university where it was surplus to requirements.
The unit powers on and the rack rotates at various speeds. The oven function has been tested at 37 Celsius and a max temp of 85 Celsius. The oven held at these temperatures accurately when compared with our own digital thermometer (see pictures).
It is in good cosmetic condition with a few signs of use throughout.
£ 243.00 (ex. VAT) 1 in stock
Jencons Millennium Co2 Lab Incubator
ITEM-12658
This unit was removed from a lab as surplus to requirements.
Unit inside is in excellent condition inside.
Unit powers on but alarms come on and we can't seem to turn off. We have not been able to test further.
£ 303.75 (ex. VAT) 1 in stock
Kendro Heraeus Cytoperm 2 CO2 Lab Incubator - Spares Repairs
ITEM-07875
This unit was removed from a lab during a clearout. We were informed the unit is faulty.
At our site, we powered on the unit but it does not heat at all.
The unit has a power key, but not a door key.
Internal dims are 54x60x60cm Length x Width x Height (cm) split into 6 compartments.
Whole unit is 72x92x87cm Length x Width x Height (cm).
Unit is sold as spares / repairs.
£ 101.25 (ex. VAT) 1 in stock
LabCold SLIP-0150 Floor-Standing Blood Monitor Freezer Incubator -8.8C
ITEM-13919
This unit was removed from a hospital blood bank as part of an equipment upgrade programme.
The unit doesn't have any obvious way of changing the temperature and LCD panel doesn't appear to work - this is probably why they were replacing the equipment.
The unit began cooling as soon as powered on and settled at -8.8C.
There is a chart recorder but that doesn't appear to move and we don't have a key to open it.
Unit is perfectly good if you want a unit that cools to approximately -8.8C but nothing else. For any other purposes the unit requires some repairs / refurbishment.
£ 262.44 (ex. VAT) 1 in stock
LEEC P2K Laboratory CO2 Incubator Lab - Incubation at 37°C
ITEM-11636
LEEC P2K Laboratory CO2 Incubator
Recently collected from a working laboratory as a surplus to requirements.
This units is in very good condition and working order.
We have not tested the CO2 functions.
This model does not have CO2 level display, therefore it should be used in conjunction with an external (portable) gas analyser.
£ 150.00 (ex. VAT) 1 in stock
LEEC Type P-2 Precision Lab Incubator
ITEM-14589
Removed from a university lab as surplus to their requirements.
Powers on and tested working. However the unit is in poor cosmetic condition with lots of external paint peeling.
There is no set temperature dial on this - it is just set to 37C fixed temperature.
Please note our digital thermometer is not included in the sale.
£ 96.65 (ex. VAT) 1 in stock
LTE Scientific IP60-UF Standard Incubator / Oven Lab - Spares / Repairs
ITEM-14293
LTE Scientific IP60-UF Standard Incubator.
This item was removed from a lab during a clear out.
Unit powers up fine.
However, we ran it for 5 hours and it only reached 21degC so unit is sold as spares / repairs.
£ 300.00 (ex. VAT) 1 in stock
Nuaire DHD Autoflow CO2 Air jacketed incubator Lab Equipment
ITEM-14907
This Nuaire DHD Autoflow CO2 Air jacketed incubator was removed from a university as surplus to requirements. We were informed it was a working unit.
The unit powers on and has been tested up to 37 Celsius. It only reached 28C in our testing however. Our decontamination forms show that full heat cycles were run in March 2020 and that the units havent been used since.
We are not sure why it didn't reach temperature.
The unit is in good cosmetic condition and the inside is clean.
£ 77.17 (ex. VAT) 2 in stock
RS Biotech Galaxy R CO2 Incubator Model 170-001 Lab FAULTY for Spares/Repair
ITEM-06508
RS Biotech Galaxy R CO2 Incubator Model 170-001 Lab FAULTY for Spares/Repair
Due to the quantity available the cosmetic condition may differ slightly to the unit photographed.
The units we have left in stock are faulty. They have faulty door latches meaning the doors do not stay closed. They have faulty displays and they do not heat. These will be sold for Spares/Repairs only.
£ 677.32 (ex. VAT) 1 in stock
Rumed Rubarth Apparate GmbH Test Chamber Crystallography Incubator Lab
ITEM-15350
This Rumed Rubarth Apparate GmbH Test Chamber Crystallography Incubator was removed from a university where it was surplus to requirements.
The unit powers on and seems to be working. We tested it at 37degC and 50degC which it reached with no problem.
It also comes with a few different pieces of racking which can be seen in the pictures as well as 6 Internal shelves.
The controller is a 619400 unit.
Internal dimensions:
87cm H x 54cm W x 41cm D.
£ 64.31 (ex. VAT) 1 in stock
Sanyo MCO-17AI Incubator Heating Part 6241867655 Lab
ITEM-11819
This replacement part was removed from a store room as surplus to requirements.
It appears new in original packing.
£ 80.38 (ex. VAT) 1 in stock
ShellLab Dual-Stack Lab Incubator 1820IR - Spares / Repair
ITEM-11779
This unit was removed from a lab during a clearout.
It powers on, but does not heat so is sold as spares / repairs only.
Items 1 to 20 of 24