Instrumentation

Agilent / HP 1100 Series HPLC System consisting of the following components:

G131A VWD Variable Wavelength Detector - Powers on

G1316A Colcom Column Compartment - Powers on

G1313A ALS Autosampler - Powers on

G1312A BinPump Binary Pump - Powers on

G1322A Degasser - Powers on

Solvent Tray

This system also comes with an HP Series 3 5/75 PC Computer, Hitachi CM615 Monitor & Keyboard. (PC does not power on).

This equipment was recently removed from a working laboratory in a top UK University. The equipment is in great condition and each component powers on (except for PC). However please aware that this system is missing lots of components and parts.

During the power cycle each component flash through Green, Amber, Red. All the modules stay on either solid Amber or Red light. This means there are components missing and the module has failed the self check boot sequence. We cannot confirm what parts are missing or what the faults are.

Please note that due to the above the items are not fully functional, they power on only.

Agilent / HP 1100 Series HPLC System consisting of the following components:

G131A VWD Variable Wavelength Detector - Blows Fuses

G1316A Colcom Column Compartment - Powers on

G1313A ALS Autosampler - Powers on

G1312A BinPump Binary Pump - Powers on

Solvent Tray

This equipment comes with the following software (Does not come with PC):

Agilent Technologies LAN Card G1369A

Agilent Technologies ChemStation Plus

Agilent Technologies User Information & Utilities for LC & CE Instruments

Agilent Technologies ChemStation Family Software Products 

Agilent Technologies ChemStation Win 2000/NT Manuals

ChemStation Installation Disk ! & "

ChemStation Service Release !

1 other Disk 

This equipment was recently removed from a working laboratory in a top UK University. The equipment is in great cosmetic condition and each component (except for the VWD - which blows fuses). However please aware that this system is missing components and parts.

During the power cycle each component flash through Green, Amber, Red. All the modules stay on either solid Amber or Red light. This means there are components missing and the module has failed the self check boot sequence. We cannot confirm what parts are missing or what the faults are.

Please note that due to the above the items are not fully functional, they power on only.

This unit was removed from a lab during a clearout. We have powered it on but not tested it further.

This unit was removed from a laboratory as surplus to requirements. The lab manager informed us that he has not used the system in a few years and cannot recall if its fully functional so it is sold as powers on not tested further.

We have not tested the system except power-on.

GeneAmp PCR System 9700

This unit was removed from a lab as surplus to requirements.

The unit was in full working order prior to removal from the lab.

This unit was removed from a laboratory during a clearout. It has been powered on but not tested further.

ATI Unicam 610 Series Gas Chromatograph

This unit was surplus to a UK labs requirements.

Unfortunately the unit doesn't power on, so is sold as spares / repairs only.

This unit was removed from a lab as surplus to requirements.

We have powered it on but not tested it further.

This unit was removed from a lab as surplus to requirements.

We have powered it on but not tested it further.

Bio Rad T100 Thermal Cycler PCR Instrument

This system was removed from a lab as surplus to requirements.

It appears to be in full working order.

BIO-RAD BioLogic LP Low-pressure Chromatography System Laboratory

This system was removed from a lab as surplus to requirements. We were informed it was in full working order but have only tested it for power-on at our facility.

This unit was removed from a lab as surplus to requirements.

It appears to be in good working order.

BioRobotics MicroGrid Compact Model: MGII - 410 Colony Picking Laboratory System with Power Supply Controller Unit

This unit was removed from a lab as surplus to requirements

We were assured the unit is in full working order, but it does not come with software or PC.

• This has been pulled directly from a working laboratory. The unit apparently was working perfectly, but they no longer required it.
• However, the lab did remove a range of infrastructure equipment prior to us collecting, and all we received was the metal frame which we believe is involved in sample insertion. There is no software included or other accessories.
• The unit itself weighs 1,100kg. We do not know which type of magnet wire is included, but this would be an excellent strength magnet for a wide range of materials.

Please enquire if you would like further details.

Bruker Ultraflex TOF/TOF. 

This units turbo pump (a Varian SQ266) failed and the department were unable to source a replacement so decided to sell the instrument. Other than the turbo pump, the system was in full working order.

We didn't get chance to photograph the unit in the lab, as we had to remove it quite quickly, and is currently stored safely in our warehouse awaiting sale.

Please be aware there is a few cosmetic marks on the unit, but it is generally in good condition.

The instrument is a high performance MALDI-TOF/TOF mass spectrometer used predominately for analysis of large molecules such as biopolymers. The Ultraflex can perform mass measurement of femtomole quantities of peptides, proteins, nucleic acids, and synthetic polymers. In addition, it is capable of performing tandem mass spectrometry experiments for structural elucidation of organic molecules or, more commonly, for sequence identification of peptides in support of proteomics research.

The following Software would normally be required (these are not included):

Bruker flexControl

ProteinScape

Other Software /cables may also be required.

This system was removed from a lab as surplus to requirements.

The lab manager assured us the unit was in working order when last used. At our site we have powered it on but not tested it further.

This system was removed from a lab as surplus to requirements.

The lab manager assured us the unit was in working order when last used. At our site we have powered it on but not tested it further.

CRYOGENIC Liquid Helium Level Gauge Unit - DLG 200

This item originated in a top UK University and has come to us as part of a Lab Clear Out.

Differential Fluorometer 299/T - Edinburgh Instruments came to us from top UK university.

This unit has not been tested and we were unable to get any information about working condition because this item has been removed from a laboratory and stored in a store room for several years. We are not able to carry out any tests as the power cord and cable between the two modules are cut off and missing so it is being sold as spares or repairs.

This unit was removed from a chemistry store room during a clearout. We were assured by the lab manager the unit is in full working order.