Items 161 to 180 of 1284

Image of item

£ POA 1 in stock

AGEMA Thermovision 870 Infrared Thermal Imaging System with Accessories Lab

ITEM-19950

This AGEMA Thermovision 870 Infrared Thermal Imaging System was removed from a university lab where it was surplus to requirements.


Everything powers up but it has not been tested further. Everything is in reasonably good cosmetic condition with marks from use.


Included with it are;

1 x Camera (We were unable to remove the cable to see the cat.no.)


1 x Portable Display

Cat no. 556 192 905


1 x Power Supply/Charger Unit

Cat no. 556 192 906


1 x Infared Lens 20˚SW

Cat no. 556 192 902

Comes in a protective case.



Image of item

£ 398.03 (ex. VAT) 1 in stock

Agilent / HP G1512A GC Autosampler Controller

ITEM-07580

This unit was removed from a lab as surplus to requirements and we were assured the unit was in working order prior to removal from the lab However, we have only tested it to power-on ourselves.


Therefore we are happy to sell the unit on the basis that it is in working order, and if you encounter any problems we can offer a 90-day return to base warranty.


Within the UK, we will also arrange the return postage so you are not out of pocket if a problem does arise with the unit.


Image of item

£ 1,653.44 (ex. VAT) 1 in stock

Agilent 6890 / MSD Software Packages & Manuals Job Lot Mass Spectral Libraries

ITEM-10481

This large collection of software was removed from a mass spec lab store-room during a clearout. There is a large collection of software packages, manuals, and reference guides.


  • Agilent HP G1032C enviroquant software user guide
  • Agilent software/registration product number: G1701CA,
  • HP C4742A user guide
  • HP G1034C chemstation installation notes
  • HP Pc image engineer 5970-0060-EN
  • Agilent G1701CA MSD installation manual
  • 5 x MSD Productivity software
  • Agilent 6890 GC-ALS service info
  • HP chemstation product software
  • Agilent mass spectral libraries
  • Agilent technologies recovery DVD
  • Agilent automatic liquid sampler handbook
  • Agilent 7683 automatic liquid sampler installation guide
  • Agilent 7683 automatic liquid sampler operation guide
  • Agilent GC ALS Upgrade disk --- G2613-60550
  • Agilent professional configuration instruction guide
  • Agilent custom report software guide
  • Agilent 5973 mass selective detector site preparation manual
  • Agilent 5973 hardware installation manual -- G2589-90006
  • Agilent getting started manual
  • Agilent 6890 series gas chromatograph installation
  • Agilent 5973 MSD 6890 Series GC quick reference
  • Agilent 6890 gas chromatograph operating manual volume 3 - detectors
  • Agilent 6890 gas chromatograph operating manual volume 2 - inlets
Image of item

£ 1,500.00 (ex. VAT) 1 in stock

Agilent ELO / Seahorse Bioscience Touchscreen PC E083923 + Wave Software Xfe24

ITEM-15739

This ELO/Seahorse Touchscreen PC E083923 With Agilent Wave Software was removed from a laboratory where it was surplus to requirements.


The unit is in good, used cosmetic condition and it has Agilent Wave Controller Software installed. The unit powers up and seems to be fully working.


It is for controlling a Xfe24 Unit - the XFE24 unit itself is not included.


The unit is running Windows 7 which the license has expired on but the system still appears to run fine. The screen is 18.5".



Specs;

Seahorse Bioscience Elo Touchscreen AIO 18.5" LCD Intel Core E8400 3.00GHz Ram 4GB HDD 320GB E083923 ESY19C3-8UWA-1-BZ-MT-W7-WH-RR

SKU: 266400102601

 

Specification:

 

Medical Display Screen Panel

Retail Display Screen Panel

 

CPU - Intel Core 2 Duo E8400 3.0GHz 6MB L2 Cache

RAM - 4GB

HDD -

 

Display - 18.5" diagonal, Active matrix TFT LCD

Aspect Ration - 16:9

Resolution - 1366 x 768 @ 60Hz

Colors - 16.7 Milion

Response Time - 5ms

Contrast Ratio (typical) - 1000:1

 

Viewing Angle:

Horizontal: ±85 or 170 total

Vertical: ±80 or 160 total

 

USB Ports - 6 x USB 2.0 (4 on I/O, 2 x USB Front Access)

Additional internal ports available for optional Elo peripherals

 

Serial Ports - 2 x USB-to-Serial RS-232 (standard)

Parallel Ports - Optional parallel port card kit

Ethernet Port - 1 x LAN RJ45 (Gigabit)

Wireless - Optional USB wireless kit available (802.11b/g/n)

Cash Drawer Port - Optional cash drawer kit available (12V/24V default; selectable via jumper)

Standard HDMI out

Optional 2nd VGA port expansion card

Audio Ports - 1 x 3.5mm line-in, 1 x 3.5mm line-out, 1 x 3.5mm mic-in

Speakers - Two 2W internal speakers

 

Power supply

External 12VDC universal-type power supply brick

AC input voltage: 100-240VAC

Input frequency: 50-60Hz

 

Max Power Consumption ~ 113W

 

Maximum Touchcomputer Dimensions (W x H x D) - 18.7" x 14.2" x 12.4" (475mm x 360mm x 316mm)

Maximum Touchcomputer Dimensions With Stand (Display at 0° tilt, W x H x D) - 18.7" x 14.9" x 8.9" (475mm x 380mm x 226mm)

 

Weight:

With Stand - 20.6lbs (9.3kg)

Without STand - 16.6lbs (7.6kg)

 

Mounting Options - 100mm VESA mount

Color - White

MTBF - 50 000 Demonstrated

Image of item

£ 275.57 (ex. VAT) 1 in stock

Agilent Exchange PMT Calibration Chip Lab G25505-89036

ITEM-10895

This unit was removed from a lab store room during a clearout.


It looks practically new in the box, thought it is possible it has been used before.

Image of item

£ 61.84 (ex. VAT) 1 in stock

Agilent G2500A Power Module Laser Cooling For GeneArray Scanner System Lab

ITEM-10915

This Agilent G2500A Power Module For GeneArray Scanner was removed from a university where it was surplus to requirements.


We sold the GeneArray Scanner to an international buyer who didn't need the power module - so we now just have the power module.


We were unable to test this unit, but it is in good cosmetic condition and was in full working order prior to removal from the lab.

Image of item

£ 468.62 (ex. VAT) 1 in stock

Agilent Micro-Array System (Scanner & PC) Lab Micro Array Scanner

ITEM-08279

This system was removed from a lab as surplus to requirements. The unit was in full working order prior to removal from the lab.

Image of item

£ POA 1 in stock

Agilent Technologies 2200 TapeStation with Software Lab

ITEM-20062

This Agilent Technologies  2200 TapeStation with Software was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further. It was working fully prior to removal.


It is in good cosmetic condition but has some marks from use.


Included with it are;


1 x Software & User Information

The discs are clean and without scratches.


1x TapeStation Quick Guide

Revision A.01.05


1x Power supply




Image of item

£ 881.77 (ex. VAT) 1 in stock

Agilent Technologies Chemstation Software Pack Revision A HPLC Lab

ITEM-15543

This Agilent Chemstation Software Pack was removed from a laboratory where it was surplus to requirements.


Included are 4 manuals:


Getting Started.

Understanding Your Spectra Module.

Installing Your ChemStation.

Understanding Your ChemStation.


Also:


2 x Software Certificate And Registration Packets.

1 x Mousemat.

1 x Agilent Reference Collection Discs.

1 x ChemStation Family Software Products Rev A.10.02 Disc.

2 x Agilent 1100 Series HPLC Maintenance & Repair Discs.

1 x ChemStation Plus User Documents Disc.

1 x Patch Cable.


All of the items appear to be brand new and unused.


We have blocked out the software code but it will be included.

Image of item

£ 937.25 (ex. VAT) 1 in stock

Agilent Technologies G2505C DNA Microarray Scanner

ITEM-09964

This unit was removed from a lab as surplus to requirements.


We were assured it was in full working order prior to removal.


We do not have any software for this system.

Image of item

£ 1,500.00 (ex. VAT) 1 in stock

Agilent Technologies Mainboard Compact LC 600 PN G4280-65850 Lab

ITEM-16484

This Agilent Technologies Mainboard Compact LC 600 PN G4280-65850 was removed from a university lab where it was surplus to requirements.


It is brand new in the box, however, the box was not sealed.


It has not been tested.

Image of item

£ 1,125.00 (ex. VAT) 1 in stock

AID EliSpot FluoroSpot Reader System HR Lab

ITEM-18691

This AID EliSpot FluoroSpot Reader System HR was removed from a university lab where it was surplus to requirements.


The unit appears to be in reasonable used cosmetic condition.


The unit powers up and the internal light illuminates. The internal camera appears to move up and down when the button on the front of the unit is pressed. There is no software or PC included so it was not tested further.


It has a Firewire connection for a PC on the rear.



Image of item

£ 900.00 (ex. VAT) 1 in stock

AID EliSpot FluoroSpot Reader System Model ELR02 Lab

ITEM-18687

This AID EliSpot FluoroSpot Reader System Model ELR02 was removed from a university lab where it was surplus to requirements.


The unit powers up and the bulb illuminates. The internal camera moves up and down when the button on the front of the unit is pressed. It has not been tested further.


There is no PC or software included but it does have a firewire connection for a PC on the rear. There is a box with a spare bulb in it, but the bag is not sealed. We are unsure if it is used or not.


It is in reasonably good cosmetic condition but has marks from use.



Image of item

£ 702.94 (ex. VAT) 1 in stock

Albert Gnehm OM-150 Universal Hardness Tester Indenter Lab

ITEM-07213

This unit was removed from a university engineering department as surplus to requirements.


We were informed that: "The only issue with it is that the indenter itself doesn’t move out of the way after it’s marked the sample and so the operator isn’t able to view the sample through the lens." 


Lot includes:


1 x Fixed test piece support


1x Fixed prism support


1x 2,5mm diameter penetrator


1 x 1/16" diameter penetrator


1 x Penetrator labelled B440


1 x 5mm Penetrator with 5 spare ball bearings


What appears to be the spherical plate for testing irregular items (as per manual)


A penetrator and 50 x lense are stuck inside the machine. I couldn't loosen them.


1 x 100X lense


1 x 200X Lense.


Supposed to include 3 weights that slot in the back. Couldn't find them anywhere.

Benjamin Glazier created – 1 year ago

Image of item

£ 217.82 (ex. VAT) 1 in stock

Alcatel 5150 Turbo Ceramic Lab Molecular Vacuum Pump

ITEM-06293

Alcatel 5150 Turbo Ceramic Lab Molecular Vacuum Pump


Type 5150

Serial no. 80356

Image of item

£ 91.55 (ex. VAT) 1 in stock

Alcatel CFF Turbo Controller Lab Turbomolecular Vacuum Pump - Spares/Repair

ITEM-06296

Alcatel CFF Turbo Controller Lab Turbomolecular Vacuum Pump - Spares/Repair


Type 56984

Serial 684


300VA

50/60Hz


This unit has been taken from a Lab in a top UK University as part of a Lab Clear Out, the unit does not power on and is being sold as Spares or Repair only.

Image of item

£ 3,645.00 (ex. VAT) 1 in stock

Alfa Laval Chemap CF 3000 Fermenter + Reaction Vessels, Lab Laboratory

ITEM-09588

This system was removed from a lab as surplus to requirements.


We were assured the system was in full working order prior to removal from the lab.

Image of item

£ 1,463.30 (ex. VAT) 1 in stock

Alldays, Peacock & Co Ltd Wind Generator Fan with 3HP Motor (415V)

ITEM-17022

This Alldays, Peacock & Co Ltd Wind Generator Fan was removed from a university lab where it was surplus to requirements.


The unit has not been tested but it was in working order prior to removal.


It is mounted on a solid steel angle iron frame. There is a circuit breaker and control panel mounted the side of the rig.

Also fitted are 2 x 2 gang metal 240V sockets.


The wooden filter box houses a coarse fibre filter.


We recommend that a qualified electrical carries out testing before use. This item is in good condition for its age but does have ageing and usage marks.


Please note, the pallet truck is not included.


Image of item

£ 1,831.52 (ex. VAT) 1 in stock

Alldays, Peacock & Co Wind Generator 1SD Fan with 15HP Motor - 330-440V

ITEM-17023

This Alldays, Peacock & Co Wind Generator Fan was removed from a university where it was surplus to requirements.


The unit has not been tested but we were informed that the motor was working prior to removal.


It is in good cosmetic condition but has some marks from use and age. It has a circuit breaker and a control panel mounted on the side and the wooden filter housing houses a coarse fibre filter.


A qualified electrician should carry out tests on this unit before it is used again.


Image of item

£ 1,562.07 (ex. VAT) 1 in stock

Alltech N2 Micro Nitrogen Generator Lab

ITEM-12544

This item was removed from a working environment as surplus to requirements.


The unit power ons and completes depressurisation cycle, but we cannot test further. If you order the item and it does not work properly we will happily arrange a refund in exchange for a return.


Some purely cosmetic issues as shown in the images, looks like some spillages or staining from it's pervious working environment.

Items 161 to 180 of 1284