Items 221 to 240 of 1284

Image of item

£ 164.02 (ex. VAT) 1 in stock

ARJO Calypso CDB 60XX Lift Chair

ITEM-12178

Alenti Model CDB 80XX Height-Adjustable Chair Mobility Aid Host

Please note that this device would need a new battery.


This unit must be tested and safety inspected by a competent engineer prior to use.

Image of item

£ 103.95 (ex. VAT) 1 in stock

Armfield Capture FM12 Centrifugal Compressor Demonstration Unit

ITEM-10229

This unit was removed from a chemical engineering teaching lab as surplus to requirements.


We were assured that the unit itself is working.


We do not know if the unit requires an additional PC for all applications, but if so, this is not included.

Image of item

£ 277.81 (ex. VAT) 1 in stock

Armfield CEX Chemical Reactor Service Unit With ElectroLab Special Elogger Unit

ITEM-10226

This unit was removed from a chemical engineering teaching lab as surplus to requirements.


We were assured that the unit itself is working.


We do not know if the unit requires an additional PC for all applications, but if so, this is not included.

Image of item

£ 208.37 (ex. VAT) 1 in stock

Armfield CEXC-A Chemical Reactor Engineering Teaching Lab

ITEM-10293

This unit was removed from a chemical engineering teaching lab as surplus to requirements.


We were assured that the unit itself is working.


However do not have the computer control software, and so have not been able to test it.

Image of item

£ 309.29 (ex. VAT) 1 in stock

Armfield CEXC-A Chemical Reactor Engineering Teaching Lab

ITEM-10299

This unit was removed from a chemical engineering teaching lab as surplus to requirements.


We were assured that the unit itself is working.


However do not have the computer control software, and so have not been able to test it.

Image of item

£ 82.67 (ex. VAT) 1 in stock

Armfield Electrolab Special eLOGGER 100054361 Lab

ITEM-07221

This unit was removed from a university lab as surplus to requirements.


We have powered the unit on but not tested it further.

Image of item

£ 225.00 (ex. VAT) 2 in stock

Armfield HT30X Heat Exchanger Service Unit Lab

ITEM-09432

This unit was removed from a university chemical engineering department as surplus to requirements.


We were assured the unit was in working order, but we have only tested it to power-on at our site.


Please note the power supply is not included - we tested it with a power supply we had at our site.

Image of item

£ 2,250.00 (ex. VAT) 1 in stock

Arrayjet AJ120 Super Marathon Advanced Microarray Spotter Printer Lab + Manuals

ITEM-15344

This Arrayjet AJ120 Super Marathon Advanced Microarray Printer was removed from a laboratory where it was surplus to requirements.


The unit powers up, various LEDs light up Red when power is connected. We were unable to test it any further. It comes with slides, bottles, manuals, a pump, and various hoses.


The pump sounds like it works when powered up, but it was not tested any further.


The unit appears to be in very good cosmetic condition but there are some marks/scratches and signs of use.


Image of item

£ 145.58 (ex. VAT) 1 in stock

Artel PCS Pipette Calibration System PCS-103-07G & DPU Thermal Printer Lab

ITEM-17417

Artel PCS Pipette Calibration System With Cover & Thermal Printer


This was removed from a lab as surplus to requirements.


All the units are in good cosmetic condition but do have some slight marks from use.


Included is;


1 x Artel PCS Pipette Calibration System PCS-103-07G.

The unit powers on but has not been tested further. We ran a few self-tests on the lamp and the mixer.

Serial No: 7-9120.

Software Version: PCS 7A2.203.

Hardware Configuration Code: 00-00-00-FF.

The 4 pipette holes are 21mm W x 43mm D and the pipette hole with the cover is: 21mm W x 40mm D


1 x Artel Cover for PCS System.


1 x SII DPU-414-40B-E Thermal Printer.

The unit powers up and we fed it some paper, but it was not tested further.


There is a power supply included for the calibration system, but not the thermal printer - we used our own power supply that isn't included for testing the thermal printer.





Image of item

£ 93.75 (ex. VAT) 2 in stock

Atto AE-6200 Gel Electrophoresis Slab Chamber Lab

ITEM-16462

This Atto AE-6200 Slab Chamber was removed from a university lab where it was surplus to requirements.


It appears to be in good condition but has been previously used. There is no cabling with the unit.


Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical condition. Please let us know if you would like to see a photo of the exact unit prior to dispatch.


Image of item

£ 57.07 (ex. VAT) 1 in stock

Atto AE-6200 Slab Chamber for Gel Electrophoresis Lab System

ITEM-16461

This Atto AE-6200 Slab Chamber was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good condition but has been previously used.

Image of item

£ 206.25 (ex. VAT) 1 in stock

Atto AE-6400 Rapidus Double Mini Slab Gel Electrophoresis Unit Lab

ITEM-16244

This Atto AE-6400 Rapidus Double Mini Slab Electrophoresis Unit was removed from a university where it was surplus to requirements.


The unit is in good cosmetic condition but has not been tested. It has been previously used.

Image of item

£ 132.22 (ex. VAT) 1 in stock

ATTO AE-6530 Rapidus Mini Slab Gel Electrophoresis Tank Lab

ITEM-16045

This ATTO AE-6530 Rapidus Mini Slab Electrophoresis Tank was removed from a university laboratory where it was surplus to requirements.


The unit appears used but in reasonably good condition cosmetically but has been previously used.

Image of item

£ POA 1 in stock

ATTO Constapower 3500 Model - AE-8700 Electrophoresis Power Supply Lab

ITEM-18272

This ATTO Constapower 3500 Model - AE-8700 Electrophoresis Power Supply was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with our multimeter (not included). It seems to be output as it should.


It is in good cosmetic condition with light marks from use.




Image of item

£ 128.57 (ex. VAT) 1 in stock

Atto Mini Power SJ-1082 Electrophoresis Power Supply Lab

ITEM-13398

This unit was removed from a lab as surplus to requirements.


At our site we have powered the unit on, the dials and gauges appear to move as would be expected, but we have not tested the unit fully.

Image of item

£ 182.19 (ex. VAT) 1 in stock

ATTO Rapidus Mini Slab Electrophoresis Tank Model AE-6530 Lab

ITEM-16044

This ATTO AE-6530 Rapidus Mini Slab Electrophoresis Tank was removed from a university laboratory where it was surplus to requirements.


The unit appears used but in reasonably good condition cosmetically but has been previously used.

Image of item

£ 185.22 (ex. VAT) 1 in stock

AU Micro Instruments Confocal Microscope Vertical Positioner Manipulator Optics

ITEM-09598

These two units were removed from a university confocal microscopy store during a clearout.


They appear to be used to lower/raise microscopy components. They look like they bolt onto an optics table.


We have not tested the unit as its not an apparatus we have previously used.

Image of item

£ 121.93 (ex. VAT) 1 in stock

August Sauter RL 1200 Precision Balance Scales & Cover Lab

ITEM-16756

This August Sauter RL 1200 Precision Balance Scales was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good condition but has marks from use. The cover is discoloured.


The unit powers up but seems to only work with the plate removed. The underplate is bent and is preventing the scales from working properly.


When removed the unit seemed to read out calibration weights very accurately.



Image of item

£ 901.84 (ex. VAT) 1 in stock

AutoChem ReactIR-4000 Mettler Toledo Model: S-1206-0902A FTIR Analyser Lab

ITEM-10835

AutoChem ReactIR-4000 Mettler Toledo Model: S-1206-0902A FTIR Analyser


This unit was removed from a lab where it was surplus to requirements.


The unit is in reasonably good condition with some marks, scratches and 2 cracks in the vented top part of the unit.


The power cable has an 8 pin Harting Plug on both ends and we are assuming it connects to a power supply that is not included.


Unfortunately, we were unable to test the unit.




Image of item

£ 165.33 (ex. VAT) 1 in stock

Automatic Systems Laboratories 1055 Displacement Indicator Lab

ITEM-11126

This unit was removed from a university physics lab as surplus to requirements.


We do not have a power-supply cable for this unit so we havn't been able to test it.

Items 221 to 240 of 1284