Items 401 to 420 of 1284

Image of item

£ 1,171.55 (ex. VAT) 1 in stock

Coherent Innova 90C with Laserpure 40N & I90C Controller Lab Laser System

ITEM-08229

Coherent Innova 90C with Laserpure 40N & I90C Controller Lab Laser System


This unit is being sold as it is not required by the laboratory. We were informed it was in full working order - but we have not tested the unit.

Image of item

£ 781.05 (ex. VAT) 1 in stock

Coherent Innova I30-4C Laser Ion Unit + Innova I300C & I304C-BD Power Supply

ITEM-12672

System is in good condition, includes a Laser Unit, Power Supply, Controller/Remote, Ethernet Cable & Pipe.


We were informed by our contact at the Uni that it is in working condition however we have not tested it ourselves.



You will need to carry out any and all safety tests and calibrations to ensure this unit is safe for use and meets any and all relevant legislation.

Image of item

£ 78.11 (ex. VAT) 1 in stock

Coherent Innova I90C-4 Laser Unit Lab - Spares Repairs

ITEM-12669

This unit was removed from a laser lab during aclearout.


On arrival, it had a large sticker on it saying 'dead'. We do not know any further but are assuming it is spares / repairs only.

Image of item

£ 84.81 (ex. VAT) 1 in stock

Coherent Innova Model I300C Laser Controller Lab 0169-628-00A

ITEM-12653

This unit was removed from a laser lab as surplus to requirements.


The lab said it was working when last used.


At our site we have not tested it.

Image of item

£ 58.64 (ex. VAT) 1 in stock

Coherent Laserpure 20 Laser Chiller 0301-120-00 Lab

ITEM-07085

This unit was removed from a university during a clearout.


It is in fairly poor condition with the lid being bent out of shape. We are not able to test the unit so it is sold as spares / repairs.

Image of item

£ POA 1 in stock

Coherent Radius 405 Laser with Newport 370-RC Post Clamp and 70 Arm Lab

ITEM-20174

Coherent Radius 405 Laser with Newport 370-RC Post Clamp and 70 Arm


This was removed from a university lab where it was surplus to requirements.


The laser is in good cosmetic condition but has not been tested.


Wavelength - 470nm


Power 30.0 mW


The clamp and arm seem to be in good condition and work smoothly.


Image of item

£ 257.13 (ex. VAT) 1 in stock

Coherent Redflame Laser Part#1008053/AC 638nm / 22mW Lazer Lab

ITEM-14698

Coherent Redflame Laser.


Item was removed from a lab during a clear out.


Part Number 1008053/AC.

Wavelength/Power 638/22mW.

Serial Number 1AN58.

Beam 1mm Circular

Options N/A.


Appears to be in good condition.

Comes in original box.

Unable to test.

Please see photos for more details.


Unit measures: 22cm long/44.3mm Diameter.

Image of item

£ 86.26 (ex. VAT) 1 in stock

Cohu 7800 Model 7812/2000 Camera Lab Photography Equipment

ITEM-06233

Cohu 7800 Model 7812/2000 Camera


This camera came to us from a Lab Clear Out and we do not have the facilities to test.


Some accessories included, see pictures.


This unit is being sold as untested.  You will need to carry out any and all safety tests and calibrations to ensure this unit is safe for use and meets any and all relevant legislation.

Image of item

£ 14,058.69 (ex. VAT) 1 in stock

Complete Leica EBL100 eBEAM System Electron Beam Lithography

ITEM-08110

This system was removed from a UK university as it was no longer required or being used.


Please enquire if you are interested in the system - all reasonable offers will be considered.



Image of item

£ 403.53 (ex. VAT) 1 in stock

Consul T.S/Becton Dickinson Medimachine System Lab

ITEM-14370

Consul T.S Medimachine System.


This item was removed from a lab during a clear out.


This unit is also sold under the 'Becton Dickinson Medimachine' name.

The Becton appears to made for them by Consul T.S.

It appears to be a more common version of this machine.

The units appear to be identical.


Unit has been powered up.

The LED's light up.

It has not been tested any further.


Unit appears to be in good cosmetic condition.


Comes with various accessories.

Please see photos for further details.



Image of item

£ 317.57 (ex. VAT) 1 in stock

Cook Regentec Model 4105 Hand Held Tube Sealing Head & 4700 Power Supply Lab

ITEM-16885

Cook Regentec Model 4105 Hand Held Tube Sealing Head & 4700 Power Supply


This was removed from a lab as surplus to requirements.


The unit powers o but we were unable to test it further. It is in good cosmetic condition but has some marks from use.

Image of item

£ 82.41 (ex. VAT) 1 in stock

Copley Apollo I X-Ray Viewing Light Box Illuminator Lamp with Magnifier Lab

ITEM-15798

This Copley Apollo I Illumination Light Box was removed from a university laboratory where it was surplus to requirements.


The unit powers on and is in good working order. It is in good cosmetic condition but there are signs of general use on the item.








Image of item

£ POA 1 in stock

Corbett Robotics Liquid Handling System Model - CAS1200 Lab

ITEM-19976

This Corbett Robotics Liquid Handling System Model - CAS1200 was removed from a university lab where it was surplus to requirements.


The unit powers up fine and part of the robot moves when powered and switched off but we were unable to test it further.


It is in good cosmetic condition with only minor marks from use.


It comes with

9 x Packs of 96 Tips (Lot no. 110210-281)

1 x Corbett Research Block - P/N 3001-008


There is a Dell Laptop which goes with system and we believe it has software on it. We got the hard drive to read in the caddy to take a screenshot of the software, but we think there's a fault with the operating system causing it not to boot properly. We tried it on 2 PCs and the laptop and had the same result.


Pressing "system restore" just caused it to crash.


Image of item

£ POA 1 in stock

Corsair Manufacturing Laboratory Glassware Drying Cabinet M41272 Lab

ITEM-18916

This Corsair Manufacturing Laboratory Glassware Drying Cabinet M41272 was removed from a university lab where it was surplus to requirements.


The unit powers up and was tested with a digital thermometer. It reached 22.8˚C when set to max.


it is in reasonable cosmetic condition but has signs of heavy use. One of the glass doors has been noticeably changed as they have different handles. The glass is also stained and has old stickers on one side.


Inside there are;

3 x slots for shelves shelves

2 x wired rack shelves.


Interior measurements:

76cm L x 30cm W x 43cm H


Image of item

£ 170.69 (ex. VAT) 1 in stock

Counter Balanced / Weighted Lifting Rig Engineering Hoist / Movie Prop

ITEM-17807

This unit was removed from a university physics workshop as surplus to requirements.


We are not actually sure of its intended purpose - it looks like some kind of in house rig designed to help lift an instrument.


Lifting Setup. Item is in good, used cosmetic condition. It is missing one hook from the lifting gear that is attached to the weight plates. The cog/lifting mechanism appears to work as it should. Not able to test any further.


Price negotiable - all reasonable offers considered, and we can also quote for delivery if required.

Image of item

£ 2,250.00 (ex. VAT) 1 in stock

Cressington Temperature Controller 308R, EB500 Lab Sputter System Lab

ITEM-19929

This equipment was removed from a university lab where it was surplus to requirements. Unfortunately, they did not seem to have the actual chamber unit so it is just the electronics.


Included are;


1 x Cressington 308R Temperature controller - The unit powers on and is in a good used cosmetic condition.


1 x Small Unit labelled Substrate Rotation - The unit powers on and is in a good used cosmetic condition.


1 x Cressington 308R EB Controller

Model - EB500

The unit powers on and is in a good used cosmetic condition


1 x Cressington 308R EB Controller

Model - EB500

The unit powers on and is in a good used cosmetic condition


1 x Cressington 308R EB Controller

Model - EB1000

The unit powers on and is in a good used cosmetic condition


1 x Carroll & Meynell Ltd Variable Auto Transformer

The unit powers on and is in a good used cosmetic condition

Image of item

£ POA 1 in stock

CRYOMECH CP2800 Series Helium Compressor Lab Spares/Repairs

ITEM-20060

This CRYOMECH CP2800 Series Helium Compressor was removed from a university lab where it was surplus to requirements.


It is in reasonably good cosmetic condition though there are scratches on its sides and some minor stains. Four of the top screws are missing.


The unit has not been tested as the power cable has been cut off all the way down to the base of the unit. For this reason, it is sold for spares or repairs.


Image of item

£ POA 1 in stock

Cryomech PT407 Cryocooler Head Lab

ITEM-20049

This Cryomech PT407 Cryocooler Head was removed from a university lab where it was surplus to requirements.


The unit has not been tested.


It is in reasonably good cosmetic condition but has a lot of scratches and marks from use.

Image of item

£ POA 1 in stock

Custom Built Laser System Inc Hitachi Count-10C-FC & LQC850-120E Lab

ITEM-18269

The units are in reasonably good cosmetic condition but have some marks from use.


It is largely untested, but we were able to power on Crystal Monitor Controller, Shutter Power Supply and Photodiode Amplifier Performance Tester. Nothing has been tested further.


The lot contains;

1 x Unbranded Photodiode Amplifier Performance Tester.

1 x Unbranded Crystal Monitor Controller.

1 x Unbranded Current Source Controller.

1 x Unbranded Shutter Power Supply.

1 x Unbranded J715 Optical System Bandwidth Tester.

1 x Unbranded Chip Controller.

1 x Hitachi Count-10C-FC Laser Component.

1 x Hitachi LQC850-120E Laser.


Image of item

£ 5,857.78 (ex. VAT) 1 in stock

CyBio CyBi-Well Automated Simultaneous Pipettor System

ITEM-08413

This unit was removed from a lab as surplus to requirements.


It is in full working order.


Please enquire if you have any questions or need any information on the system.


DW-CyBi-Well 96/250ul


Serial No: OL3391 7 7008

Model number: OL3391-750-25


Made in 2015

Items 401 to 420 of 1284