Items 421 to 440 of 1245

Image of item

£ 84.34 (ex. VAT) 1 in stock

Dionex PC10 Pneumatic Controller

ITEM-01913

Unit appears to be in good physical condition but has not been tested.


Pulled from a working environment.

Image of item

£ 169.65 (ex. VAT) 1 in stock

Dionex PD40 Diode Array Detector HPLC Chromatography Lab

ITEM-12863

Dionex PD40 Diode Array Detector Chromatography Equipment Lab

This unit was removed from a university lab as surplus to requirements.

The unit powers on but we do not have the expertise to test it further.

You will need to conduct all and any safety tests prior to use to ensure the unit is safe and operating correctly.


Image of item

£ 1,212.88 (ex. VAT) 1 in stock

Dionex RF 2000 Fluorescence Detector Lab Laboratory Equipment HPLC

ITEM-06459

Dionex RF 2000 Fluorescence Detector in great condition.  This equipment has come to us direct from a working Lab in a top UK University where it was surplus to requirements

Image of item

£ POA 1 in stock

Dionex Viper Capillary Kit IDxL 0.13x350mm, SST PN 6040 2335 Lab

ITEM-18569

This Dionex Viper Capillary Kit was removed from a university lab where it was surplus to requirements.


The unit is brand new and unused.


Included in the box is;

1 x Viper Cap IDxL 0.13x350mm, SST in tube.

1 x Column Flowcell VWD 0.25 x 250.

1 x P/N 6040.2385 EDxL 0.18 x 250mm Viper SST.

2 x Screw & Pin.


Image of item

£ 71.33 (ex. VAT) 1 in stock

DMI MK II Multi Programme Unit M4002 Lab + Case & Cables

ITEM-10352

This set was removed from a lab during a clearout.


The case contains 8 bags of various electrodes.


The unit runs off a 9volt battery (not included).


Unit powers up and appears to work as far as we can tell.

Image of item

£ 119.56 (ex. VAT) 1 in stock

Doric Easy Automatic Mixing System Homogeniser Blender Lab

ITEM-09065

This unit was removed from a lab as surplus to requirements.


We have powered the unit on and the various controls appear to work. We have not tested it with samples.

Image of item

£ 125.05 (ex. VAT) 1 in stock

Drager Polytron 2XP-EX Sensing Head PN 4543059 Lab

ITEM-17000

This Drager Polytron 2XP-EX Sensing Head was removed from a university lab where it was surplus to requirements.


The unit is in very good cosmetic condition but has not been tested.

Image of item

£ 75.00 (ex. VAT) 1 in stock

Drummond Scientific Falcon Pipet-Aid Vacuum Pressure Pipette Dispenser Lab

ITEM-14897

This Drummond Scientific Falcon Pipet-Aid Vacuum Pressure Pipette Dispenser was removed from a laboratory where it was surplus to requirements.


Included is a complete unit and what appears to be a separate pump system. Both pumps power on and pull a vacuum and release pressure but have not been tested in an depth. They are quite old and have seen a lot of use. The filter will need changing on the complete unit.



Image of item

£ 388.13 (ex. VAT) 2 in stock

Dynal BeadRetriever System Model No.701

ITEM-02813

Based on magnetic separation technology, the BeadRetriever System enables rapid purification and concentration of selected targets from a broad range of samples. Partnered with Dynabeads immunomagnetic separation (IMS) products, the BeadRetriever system provides an optimized solution for the detection of microorganisms of importance in the analysis of food, water, and other environmental samples.

o Magnetic Dynabeads particle-based microorganism purification
o Protocols included for Cryptosporidium, E. Coli 0157, EPEC/VTEC, Giardia, Legionella, Listeria and Salmonella.
o Automated processing of up to 15 samples in ~40 min
o High reproducibility and maximum performance of capture technology
o Simple, easy operation-complete processing through internal program
o Small footprint-uses only 11.8 in (30 cm) of bench depth
Image of item

£ 354.76 (ex. VAT) 1 in stock

Dynatech Laboratories MRX Microplate Reader Lab - Spares / Repairs

ITEM-07125

This Microplate Reader was removed from a university where it was surplus to requirements.


The unit powers on but doesn't seem to work further than this as nothing displays on the screen. Therefore we think it is spares / repairs.


It is in reasonable cosmetic condition but the rear panel appears to be quite rusty.





Image of item

£ 256.29 (ex. VAT) 1 in stock

Dynex Opsys MW Microplate Washer Laboratory Spares / Repair

ITEM-12900

Dynex Opsys MW Microplate Washer Laboratory

This unit was removed from a lab during a clearout.


The unit does power on, but on the digital screen appears message 'X Motor Home Error' our team were unable to get it to run therefore it is sold as spares / repair.



Image of item

£ POA 1 in stock

Dynex Technologies Scientific OPSYS MR Microplate Reader with Manual Lab

ITEM-20161

This Dynex Technologies Scientific OPSYS MR Microplate Reader was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further.


It is in good cosmetic condition but has some marks from use. It is supplied with a user manual which has been slightly water damaged.



Image of item

£ 485.15 (ex. VAT) 1 in stock

Dynex Ultra Wash Plus Microplate Washer Lab

ITEM-11847

This unit was removed from a lab as surplus to requirements.


The lab manager said this unit was working when last used. At our site we have powered it on but not tested it further.

Image of item

£ 80.59 (ex. VAT) 1 in stock

Dynex Ultra Wash Plus Microplate Washer Lab - Spares Repairs

ITEM-12138

This unit was removed from a lab during a clearout.


The unit does not power on so it is sold as spares / repairs.

Image of item

£ 184.57 (ex. VAT) 1 in stock

E.Braun Heating Temperature Control Unit BT 5 WBi Lab 4.5kW Autoclave Steriliser

ITEM-15986

This unit was removed from a lab during a clearout.


It looks like a panel that would be mounted to perhaps an autoclave / steriliser system. We couldn't find a lot about the system online, and therefore we have not tested the unit.

Image of item

£ 170.41 (ex. VAT) 1 in stock

Edinburgh Instruments LM20-Laser-Mite Lab Laser w/ Power Supply + Temp Control

ITEM-06496

Edinburgh Instruments LM20-Laser-Mite Lab Laser w/ Power Supply + Temp Control

This laser with power supply and temperature control unit originated in a Lab in a top UK University and has come to us as part of a Lab Clear Out.

Due to the nature of the item we have not tested it.

This unit is being sold as untested.  You will need to carry out any and all safety tests and calibrations to ensure this unit is safe for use and meets any and all relevant legislation.

Image of item

£ POA 2 in stock

Edwards 450GRM Charge Activated Alumina 0.45KG Item no. H02600050 Lab

ITEM-18762

This Edwards 450GRM Charge Activated Alumina 0.45KG Item no. H02600050 was removed from a university where it was surplus to requirements.


It is brand new and sealed in a bag inside the tin. The tine however has been opened.

Image of item

£ POA 1 in stock

Edwards AIM-PL-NW25 Active Gauge Part no. D14646000

ITEM-18755

This Edwards AIM-PL-NW25 Active Gauge was removed from a university lab where it was surplus to requirements.


The unit is brand new and has not been used. It was sealed but we had to remove it from the packaging to confirm what it was.





Image of item

£ POA 1 in stock

Edwards AIM-SL-NW25 Inverted Magnetron Vacuum Gauge Part no. D14644000 Lab

ITEM-18756

This Edwards AIM-SL-NW25 Inverted Magnetron Vacuum Gauge Part no. D14644000 was removed from a university where it was surplus to requirements.


The unit is brand new and unused but the package had to be opened to confirm what was inside.

Image of item

£ 81.20 (ex. VAT) 1 in stock

Edwards CG16K Capsule Dial Vacuum Gauge Lab

ITEM-12630

This unit was removed from a lab as surplus to requirements.


We have not tested the unit.

Items 421 to 440 of 1245