Items 521 to 540 of 1245

Image of item

£ 1,676.12 (ex. VAT) 1 in stock

Flanders Absolute Isolation 8 Slot Dry Glove Box Lab - Refurbishment Needed

ITEM-16825

This Flanders Absolute Isolation 8 Slot Dry Glove Box was removed from a university lab where it was surplus to requirements.


The unit is in reasonable, used condition but it does have various signs of use. The stainless panels have quite a lot of sticker/tape residue.

It only has 4 out of 8 gloves currently fitted but there are two more in a box (totaling 6). Of the two in the box, one is sealed, the other looks used.


Quite a few of the ring seals/glove mounting rings are damaged and will need replacing. One of the main switches has been pushed inside the unit and the cover is missing from the start switch.


One of the gas struts from the main hatch is not fitted. It is inside the unit and appears to be seized and needs replacing, though the hatch does still open fine.


When powered up the internal light comes on and the main control panel lights up. We were not able to test any further.


This unit will require an overhaul and refurbishment prior to use. It is sold as spares/repairs on this basis.


The internal dimensions are:

172cm L x 95cm W x 87cm H.


Please enquire for options if you would like a delivery quote.

Image of item

£ POA 1 in stock

Flatters & Garnett Ltd Hand/Bench Microtome Lab

ITEM-18482

This Flatters & Garnett Ltd Hand/Bench Microtome was removed from a university lab where it was surplus to requirements.


It is in good cosmetic condition with only light marks from use. We have not tested it.


The unit comes supplied with a box and manual.

Image of item

£ POA 1 in stock

Flatters & Garnett Ltd Vintage Hand Microtome Lab

ITEM-18481

This Flatters & Garnett Ltd Vintage Hand Microtome was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition with light usage marks but has not been tested. It comes with a box.

Image of item

£ 65.06 (ex. VAT) 1 in stock

Flohr Industries A.12191.90 k110s Motor / Gearbox Lab

ITEM-09509

This unit was removed from a workshop store as surplus to requirements.

Image of item

£ 5,547.74 (ex. VAT) 1 in stock

Fluidigm C1 Single Cell Auto Prep System for MRNA Sequencing 100-7000 Lab

ITEM-16106

Fluidigm C1 Single Cell Auto Prep System for MRNA Sequencing


This unit was removed from a university laboratory where it was surplus to requirements.


The unit is in excellent cosmetic condition but has a couple of small scuffs.


It powers up and the sample tray opens and closes. It has not been tested further. We were however informed by the lab that it is indeed functional. It just hasn't been used in a couple of years.





Image of item

£ 6,187.66 (ex. VAT) 1 in stock

Fluidigm C1 Single-Cell Auto Prep System mRNA sequencing Lab

ITEM-09075

This system was removed from a lab as surplus to requirements.


It was in full working order prior to removal from the lab, but simply no longer required.

Image of item

£ 1,875.00 (ex. VAT) 1 in stock

Fluidigm Polaris Single-Cell Research System & Accessories Lab

ITEM-14876

This Fluidigm Polaris Single-Cell Research System was removed from a university where it was surplus to requirements.


Item powers up but shows a display error. 'No signal input'

We were unable to test it any further. It appears as though the internal PC is probably faulty.

All the internal fans power up, and the unit does power. We suspect that the 'no signal input' on the touch screen during startup is caused by the PC not booting however, we cannot be certain of this.

We tested the PC's output onto a different external monitor and had the same problem.

Note that two of the bolts for the side panel also appear to have been sheered off. This does not affect the unit as there were four holding the panel on.


The unit is in very good cosmetic condition and comes with extras.

Image of item

£ 848.79 (ex. VAT) 1 in stock

Fluidigm TPZ-FID TOPAZ Lab Benchtop High / Low Pressure Protein Crystallizer Lab

ITEM-14573

Fluidigm TPZ-FID TOPAZ Lab Benchtop High/Low Pressure Protein Crystallizer.


This item was removed from a lab as surplus to requirements.


We have powered up the unit but not tested it further.


Unit appears to be in good used cosmetic condition.


Please see photos for more details.

Image of item

£ 600.00 (ex. VAT) 1 in stock

FluidX XTR 96 LF Cryo Multi Tube Rack Scanner PN - 20-2206 Lab

ITEM-18084

This FluidX XTR 96 LF Cryo Multi Tube Rack Scanner was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further. It requires a 14V power supply which is not included.


It is in good cosmetic condition but has some marks from use.


It comes in original packaging box and includes:-

1 x USB Memory stick with the setup program on.

1 x Operating instructions manual


Image of item

£ POA 1 in stock

FluidX XTR-96 96 Tube Rack Scanner & Software Lab

ITEM-19545

This FluidX XTR-96 96 Tube Rack Scanner was removed from a university lab where it was surplus to requirements.


The unit is in good used cosmetic condition. We have powered the unit up with our own 16v PSU (not included). The Green LED lights up and the internal parts move when powered. The Green LED lights up and the internal parts move when powered. The LED is hidden and our PSU would not plug in without this removed. We were unable to test it further.


Included in the set:


1 x Fluid X XTR 96 Tube Rack Scanner Unit.

1 x Manual.

1 x Fluid X 2008 Catalog.

1 x Fluid X XTR-96 Version 3.211 Software.


We have installed the software on our PC to test the unit. Unfortunately, we are missing the USB dongle so the software will not run.


Image of item

£ POA 1 in stock

Fluovac System Animal Anesthesia Gas Trap & Vetscav Weighing Mechanism Lab

ITEM-20372

Fluovac Vetscav Animal Anesthesia Gas Trap & Filter Weighing Mechanism


This was removed from a university lab where it was surplus to requirements.


Both units power up with a 12v DC power supply (not included) but have not been tested further.


They are in good cosmetic condition with some marks from use.

Image of item

£ POA 1 in stock

Fluovac Vetscav Animal Anesthesia Gas Trap & Filter Weighing Mechanism Lab

ITEM-20371

Fluovac Vetscav Animal Anesthesia Gas Trap & Filter Weighing Mechanism


This was removed from a university lab where it was surplus to requirements.


Both units power up with a 12v DC power supply (not included) but have not been tested further.


They are in good cosmetic condition with some marks from use.

Image of item

£ POA 1 in stock

Forma Scientific 420 Incubator Orbital Tabletop Shaker Lab

ITEM-18914

This Forma Scientific 420 Incubator Orbital Tabletop Shaker was removed from a university lab where it was surplus to requirements.


The unit powers up but "Power Fault" flashes on the screen on boot. The shaker moves but it doesn't get noticeably faster as you increase the controller speed. The unit doesn't seem to heat up either. Our thermometer measured 15.8˚C when the unit was supposed to be outputting 65˚C.


It is in reasonably good cosmetic condition with marks from use.


It is sold for spares or repairs due to the faulty incubator.


Image of item

£ POA 2 in stock

Formaflow System Formonia Formalin Handler & Neutralizer Model VAP3/3T Lab

ITEM-19329

This Formaflow System was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has some marks from use.


It powers up fine but has not been tested further.


Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Image of item

£ POA 1 in stock

Fotodyne Incorporated 3-3002 UV Transilluminator with Shield Lab

ITEM-18513

This Fotodyne Incorporated 3-3002 UV Transilluminator with Shield was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a UV meter. It read 580 Lumens. Only 4 bulbs are working, it seems like there should be one extra turned on. It is in reasonably good cosmetic condition but has some marks from use.




Image of item

£ 7,425.20 (ex. VAT) 1 in stock

Fourne Maschinebau KS 33 Fibre Spinning System

ITEM-11958

This system was removed from a university lab as surplus to requirements.


It was ordered new for 64,000 EUR, commissioned on site, but unfortunately the project fell through and the system was never used. IT is complete with all original parts.


You are welcome to view the system and please feel free to ask any questions.

Image of item

£ 66.50 (ex. VAT) 1 in stock

FSA Laboratory Supplies WhirliMixer Vortex Shaker / Mixer Lab

ITEM-17871

This FSA Laboratory Supplies WhirliMixer was removed from a university lab where it was surplus to requirements.


The unit is in reasonable cosmetic condition with marks from use. The feet also no longer stick to the tabletop, causing it to move around the table when at high speeds.


The 'On' mode appears to run as it should but the speed control might not be quite as sensitive as it was when it was new. The 'Auto' setting does work, but the switch needs a fair amount of pressure to activate.


Image of item

£ 849.06 (ex. VAT) 1 in stock

Fujifilm Fluorescent Image Analyser Model FLA-5000 System Lab + Software

ITEM-09007

This Fujifilm Fluorescent Image Analyser Model FLA-5000 System was removed from a university lab where it was surplus to requirements.


Included in the system is;


Fujifilm FLA 5000 - Powers on and is in good condition.


Raytek Image plate eraser III - Powers on and is in good condition.


Neither of the units have been tested further.


Manuals for both machines.


XP PC with software, user data erased.

  • Image reader FLA 5000 Series V 1.0
  • Aida Image Analyser V.3.11
  • Connected main machine to PC and software acknowledged the connection.

3 x FLA Multistage 4046 all looks to be in slight disrepair.


Spare filter tray


Connecting wires


Please note that there is no monitor included. We used our own to test it.





Image of item

£ POA 1 in stock

GAITRite Electronic Walkway System MAP/CIR Inc with Software Lab

ITEM-17299

This GAITRite Electronic Walkway System MAP/CIR Inc with Software was removed from a university lab where it was surplus to requirements.


Everything powers up and the walkways were tested with the laptop and software provided. One of them seems to track fine, but the other seems to be uncalibrated.


The system consists of the following parts:


1 x Dell Latitude D520 Laptop, Intel Centrino Duo, Windows XP.

We were able to access it with the provided password (we will provide this if purchased).

There are such program files as: Adobe Acrobat Reader, CISCO NAC Agent, Speech Engines, Firebird, Foot scan schemes, Libra, Instruments, Technologies, manuals etc.


1 x Electronic Walkway

The unit powers up and seems to be in working order. It is in good cosmetic condition.

The unit comes with its own power supply and control block.

The walkway is 500x90cm LxW


1 x Electronic Walkway

The unit powers up and seems to be uncalibrated or broken. It is in good cosmetic condition.

The unit comes with its own power supply and control block.

The walkway is 500x90cm LxW


2 x Cases for the walkways


Image of item

£ POA 1 in stock

Gallenkamp Hotbox Laboratory Oven with Fan Size 2 Cat no. OVB 305 1100 Lab

ITEM-19445

This Gallenkamp Hotbox Laboratory Oven with Fan  Size 2 was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included). It was set to 100˚C and reached 70˚C. It was then set to the max of 200˚C and reached 160˚C.


It is in reasonably good cosmetic condition but has some marks from use.


Internal dimensions - D42 x W47 x H46cm

2 x Shelves: Top - 41 x 48cm. Bottom - 31 x 43cm



Items 521 to 540 of 1245