Items 601 to 620 of 1109

Image of item

£ 32.15 (ex. VAT) 1 in stock

Lab-Line Instruments Multi-Blok Heater # 2093 115V 200W w/ 3 Blocks Working Lab

ITEM-04300

This Lab-Line Instruments Multi-Blok Heater Model no 2093 was removed from a working Lab in a top UK University.  It has 2 x 20 well blocks and 1 x 12 well block.  It has a High and Low heat setting with individual variable heat controls.  The heater easily reached 60°C when tested.  


The unit is fitted with an American style plug (115V) and a transformer or adapter is NOT included.

Image of item

£ 112.50 (ex. VAT) 1 in stock

Lab-Quatec Gastorr GT-103 Degasser Lab HPLC

ITEM-15303

This Lab-Quatec LABOC Gastorr GT-103 Degasser was removed from a laboratory during a clearance.


The lab informed us it was working when last used.


The unit powers up and it sounds like the pump is working, it however has not been tested any further than this. It's in good condition but shows some signs of use.



Image of item

£ 64.31 (ex. VAT) 1 in stock

Labconco 4330100 Bench-Top Gel Dryer Lab

ITEM-12192

This unit was removed from a lab during a clearout.


The unit appears to work as it should. The accessories may not be related to the unit - but were included with the item during the clearout.


The unit is missing all its feet.


Image of item

£ 48.23 (ex. VAT) 1 in stock

Labconco Benchtop Gel Dryer

ITEM-04837

Labconco Benchtop Gel dryer, includes power cord and silicone cover. 

Image of item

£ 862.50 (ex. VAT) 1 in stock

Labconco Centrivap Cold Trap Freeze Drier Catalog No: 78110-01 Lab

ITEM-15433

This Labconco Centrivap Cold Trap was removed from a lab where it was surplus to requirements.


The unit powers up and compressor runs. The unit was run until ready light lit. It reached -<a href="http://54.7degC.It">54.7degC.It</a> has not been tested any further.


It is in good, used cosmetic condition but it does has scrapes and plenty of signs of use.


Image of item

£ 3,000.00 (ex. VAT) 1 in stock

Labman Automation SHU2 Automated Blood Plasma Reformatting Robot Micronic Lab

ITEM-10756

This system was removed from a university hospital research site as surplus to requirements.


The unit is a bespoke system manufactured by Labman Automation for one of our university clients - but they no longer require the system.


We are grateful that Labman Automation have provided us user manuals and documentation for this instrument. They are also able to supply software and drivers, and even install and setup the instrument (all for reasonable extra cost of course). We consider their support essential to recomissioning of this instrument, and they are very supportive.


From the user manual:


"The robot has been designed, built and tested for the specific purpose of de-capping, weighing, and identifying chilled 3.8ml cryotubes, taking aliquots of sample using pipettes and dispensing to chilled micronic tubes. The machine is designed for no other purpose."


The system is required to reformat blood, plasma and urine samples from an input tube to one or many micronic output tubes. The robot is a Tecan RSP9000 series auto-sampler with one XL3000 syringe module.


The sample tracking software manages the storage of the samples in the cryogenic freezers. The robot has two independent arms. The left hand robot arm takes the aliquots from input tubes located in a two position tube buffer in the centre of the robot bed and dispenses into the output tubes.


The right hand arm takes input tubes from the input rack, removes the cap, puts them into the tube buffer and takes any processed input tubes from the buffer back to the rack. "


The unit for sale on this listing is the one on the left in the photo showing two units.


The system was in full working order prior to removal from the lab, but we have not tested it at our site.



Image of item

£ 3,000.00 (ex. VAT) 1 in stock

Labman Automation SHUV Automated Blood Plasma Reformatting Robot Micronic Lab

ITEM-11597

This system was removed from a university hospital research site as surplus to requirements.


The unit is a bespoke system manufactured by Labman Automation for one of our university clients - but they no longer require the system.

We are grateful that Labman Automation have provided us user manuals and documentation for this instrument. They are also able to supply software and drivers, and even install and setup the instrument (all for reasonable extra cost of course). We consider their support essential to recomissioning of this instrument, and they are very supportive.


From the user manual:


"The robot has been designed, built and tested for the specific purpose of de-capping, weighing, and identifying chilled 3.8ml cryotubes, taking aliquots of sample using pipettes and dispensing to chilled micronic tubes. The machine is designed for no other purpose."

The system is required to reformat blood, plasma and urine samples from an input tube to one or many micronic output tubes. The robot is a Tecan RSP9000 series auto-sampler with one XL3000 syringe module.


The sample tracking software manages the storage of the samples in the cryogenic freezers. The robot has two independent arms. The left hand robot arm takes the aliquots from input tubes located in a two position tube buffer in the centre of the robot bed and dispenses into the output tubes.


The right hand arm takes input tubes from the input rack, removes the cap, puts them into the tube buffer and takes any processed input tubes from the buffer back to the rack. "


The unit for sale on this listing is the one on the right in the photo showing two units.


The system was in full working order prior to removal from the lab, but we have not tested it at our site.

Image of item

£ 64.31 (ex. VAT) 1 in stock

Labnet Pro 30 Laboratory Reciprocal Shaker Spares / Repairs

ITEM-09844

This unit was removed from a lab during a clearout.


Unfortunately it does not power-on so is sold as spares/repairs.

Image of item

£ 38.58 (ex. VAT) 1 in stock

Labnet S0200 Laboratory Vortex Mixer Lab Spares Repairs

ITEM-10740

This unit was removed from a lab during a clearout.


Unfortunately the top piece has been snapped off / is missing so the unit is sold as spares / repairs.

Image of item

£ 143.24 (ex. VAT) 1 in stock

Laboratory Dishwasher Rack Lancer / Miele Glassware Lab

ITEM-09849

This rack was removed from a lab during a clearout.


We are not sure which models / brands this is for, but the rack measures roughly 520mm wide to wheels 500mm deep and 205mm high


Please enquire if you need further details on it.

Image of item

£ 254.64 (ex. VAT) 1 in stock

Labsystems Luminoskan RS Type 391 Microplate Reader

ITEM-06097

Labsystems Luminoskan RS Type 391 Microplate Reader


This item originated in a working lab in a top UK University and has come to us as part of a Lab Clear Out.

The unit powers up and control panel with display operational.

We are unable to test further.

100/110 Vac - 100V - 3.5 A Slow

120/130 Vac - 120V - 3.5A Slow

220/230 Vac - 22V - 2.0A Slow

240 Vac - 240V - 2.0A Slow


150VA


Serial no. 391000-084

Image of item

£ 112.50 (ex. VAT) 1 in stock

Lambda Fluoro 320e Microplate Reader Lab - Spares Repairs

ITEM-04375

This unit was removed from a lab during a clearout.


Unfortunately it does not get past the initialising stage so is sold as spares / repairs.

Image of item

£ 750.00 (ex. VAT) 1 in stock

Lambda Physik LPD 3000 3002 Physics / Chemistry Industrial Laser 190 to 1100nm

ITEM-11211

This laser was removed from a university chemistry lab as it was no longer required / no longer used.


It had not been used in a number of years, and they could not confirm its working state. IT would be reasonable to assume some refurbishment is required.


We have not tested the unit.

Image of item

£ 405.95 (ex. VAT) 4 in stock

Lancer Labsec 1400UP Laboratory Glassware Drier Lab Drying

ITEM-08543

Lancer 1400 Dryer


They are all in very similar, good condition. They haven't been used in around 9 years, and were last serviced on 25/8/2010.


This is a Dryer only - not a washer.

Image of item

£ 1,093.50 (ex. VAT) 1 in stock

Large Chubb Cs2 Fireproof Safe Data Cabinet 1900mm tall, 1100mm wide, 750mm deep

ITEM-11936

This large data cabinet was removed from a university data store as surplus to requirements.


It is very heavy, at 990kg. Delivery can be arranged but please enquire for a quote.


Unit comes with a key.

Image of item

£ 262.50 (ex. VAT) 1 in stock

Large Collection of Oscilloscope Test Probes & Spares Lab

ITEM-14835

This Large collection of test probes and spares was removed from a university where it was surplus to requirements.


Its a mixed lot of mainly generic test probes along with some spare tips.


The probes have been used previously and are in mixed condition.


They have not been tested by us.


Image of item

£ 187.50 (ex. VAT) 1 in stock

Large Lab Jointed Glassware Job Lot Centrifuge Tubes, Boiling Flasks

ITEM-14564

Lot of Multi-Type Distillation Glassware & Accessories


These items were removed from a lab as surplus to requirements.


Please see photos for further details.

Please email us if you require more photos as we have detailed photos for the entire set.

Image of item

£ 112.50 (ex. VAT) 2 in stock

Large Lab Lancer Glasswasher / Dishwasher Racks Labsec 1600UP

ITEM-13751

This dishwasher rack was removed from a laboratory as was surplus to requirements.


It was in a facility with primarily Lancer Labsec 1600UP units - whilst we have not tested or measured this unit up, we believe that was the model it was intended for. Please check the dimensions below to see if it will fit your unit.


It is in good condition, both a wheeled rack and a wire mesh tray are included.


It is 64x64x14cm LWH



Image of item

£ 97.50 (ex. VAT) 1 in stock

Large Lab Lancer Glasswasher Rack Lab 1600UP

ITEM-13752

This Glasswasher rack was removed from a university as part of a clearance. It is in good condition and is 64x65x20cm LWH in size.


It was in a facility with primarily Lancer Labsec 1600UP units - whilst we have not tested or measured this unit up, we believe that was the model it was intended for. Please check the dimensions below to see if it will fit your unit.

Image of item

£ 1,353.75 (ex. VAT) 1 in stock

Large Lot of TSI Spectra Physics Laser System + Alignment Components

ITEM-07076

Job Lot of TSI Spectra Physics Laser System + Alignment Components -  originated in a working Lab in a top UK University and came to us as part of a Lab clear out, consisting of:


1 x TSI 9167-120 (Laser)

1 x TSI Photomultiplier Model 9162

1 x TSI Photomultiplier Power Supply Model 9165

1 x TSI LV Frequency Shifter Model 9186A

1 x TSI 9832XX

1 x TSI 9115 / 1 x TSI 9182-2

1 x TSI 9140 / 1 x TSI 9176

1 x TSI 9182-2A / 1 x TSI 9179

1 x TSI 9144-A / 1 x TSI L748 

1 x TSI 9140 / 1 x TSI L858

1 x TSI 9178-1A / 1 x TSI 10960

1 x TSI 9112-B / 1 x TSI 9175 / 1 x TSI 9112-1

1 x TSI 9104 / 1 x TSI 9115 / 1 x TSI 920501

1 x TSI 10970

1 x TSI 10092 

3 x TSI 9119 Focusing Lens

1 x TSI 9253-350 Focusing Lens

1 x TSI 9167-120 Focusing Lens

1 x TSI 9167-250 Focusing Lens


1 x Metal Box containing Power Supply

1 x Small Unbranded Power Supply


Plus various leads & other parts inc lens covers

Items 601 to 620 of 1109