Items 741 to 760 of 1460

Image of item

£ 7,125.00 (ex. VAT) 1 in stock

Illumina HiSeq 2500 DNA Sequencing System 2013 Lab + Control Software

ITEM-15326

This Illumina HiSeq 2500 DNA Sequencing System was removed from a laboratory where it was surplus to requirements. The lab purchased a newer model and had held onto this system in the hopes of a future trade in with Illumina but it never happened. So the system just stayed in their lab unused.


The unit powers on but has not been tested any further. Included is a PC with Sequence Analysis View software on it.The system is in good condition but has a few marks from use.


Included as well as the PC are;

2 boxes of Corning tubes.

12 racks.

A used bottle of liquid coolant.

A Book bottle.

The moving/travel brackets for the unit.

Plus various cables etc.

Image of item

£ 53.96 (ex. VAT) 1 in stock

Impact Test Equipment Ltd Test Sieve SIE1050. 200mm Dia x 212um Steel

ITEM-15655

This Impact Test Equipment Ltd Test Sieve SIE1050. 200mm Dia x 212um was removed from a university where it was surplus to requirements.


Stainless Steel Frame.

Stainless Steel Mesh.

212 Mic Aperture.


The unit Comes in the original box and appears to be in good, used condition. The box is water damaged.

Image of item

£ 75.00 (ex. VAT) 1 in stock

Impact Test Equipment Ltd Test Sieve SIE1056. 200mm Dia x 125um Steel

ITEM-15656

This Impact Test Equipment Ltd Test Sieve SIE1056. 200mm Dia x 125um was removed from a university where it was surplus to requirements.


Stainless Steel Frame.

Stainless Steel Mesh.

125 Mic Aperture.


The unit Comes in the original box and appears to be in good, used condition. The box is water damaged.

Image of item

£ 53.96 (ex. VAT) 1 in stock

Impact Test Equipment Ltd Test Sieve Steel SIE1060. 200mm Dia x 90um Molecular

ITEM-15654

This Impact Test Equipment Ltd Test Sieve SIE1060. 200mm Dia x 90um was removed from a university where it was surplus to requirements.


Stainless Steel Frame.

Stainless Steel Mesh.

90 Mic Aperture.


The unit Comes in the original box and appears to be in good, used condition. The box is water damaged.


Image of item

£ 98.71 (ex. VAT) 1 in stock

Incomplete Peak Scientific Compressor Service Kit Part number 06-5529.

ITEM-15532

This Incomplete Peak Scientific Compressor Service Kit was removed from a laboratory where it was surplus to requirements.


Part number 06-5529.

The unit is brand new and unused in the box. From what we can tell of similar kits online, a large seal kit and screws could be missing. We believe these may have been used, and the rest of the contents left in the box.

Image of item

£ 4,182.64 (ex. VAT) 1 in stock

Ingersoll-Rand SSR Compressor + Tank + DA-8-Special & Domnick Hunter DME020

ITEM-08095

This system was removed from a plant room as surplus to requirements during a lab move. The system was in full working order prior to removal, and was professional disconnected by an engineer.


Included in the lot is:


The Ingersoll-Rand SSR Compressor + Tank (we lifts the compressor off the tank, but tank is still included

The Ingersoll-Rand DA-8 Special

The Domnick Hunter Pneudri DME020


Unfortunately, the copper piping and the 3 units shown between the Domnick Hunter and the Ingersoll-Rand DA-8 Special are not included - when we arrived these had been disposed of, but can be replaced.


Due to the nature of the system you will need to get it profesionally installed and checked upon installation.

Image of item

£ 205.20 (ex. VAT) 1 in stock

Instron 4500 Controller Tensile Tester Automated Materials Testing System Lab

ITEM-14021

This unit was part of an Instron 4500 system in a university laboratory.


We did everything we possibly could to get the complete system out of the facility, but we believe it was craned from a car-park into the basement, and its something we were not able to arrange. So we took all the parts we could remove from the system.


This controller was removed from the system.


One of the plastic tabs on the back is broken. Also the adjuster to remove the rear bracket has come off the bolt.

Image of item

£ 18.75 (ex. VAT) 1 in stock

Instron Calibration Weights Empty Wooden Box

ITEM-14944

This Empty Instron Calibration Weights Wooden Box was removed from a university during a clearance.


Its is in moderate condition and is showing signs of use.


It is just the empty box with no calibration weights.

Image of item

£ 105.24 (ex. VAT) 1 in stock

Instron Compression Plate For Hardness Testing Machine Indenter Lab

ITEM-14011

This Instron Compression Plate was removed from a university during a clearance.


It is in good condition and was removed from a machine that had previously been in use.

Image of item

£ 1,366.88 (ex. VAT) 1 in stock

Intavis Biolane HTI 16V 5110 In Situ Hybridization Automated System Labortechnik

ITEM-10510

This unit was removed from a lab during a clearout.


The unit powers on and has passed its own self-test but we have not tested it further.

Image of item

£ 3,280.50 (ex. VAT) 1 in stock

Integra Biosciences Technomat Filler Feeder + Stacker System Lab

ITEM-09920

This unit was removed from a lab as surplus to requirements and we were assured the unit was in working order prior to removal from the lab


However, we have only tested it to power-on ourselves.


Therefore we are happy to sell the unit on the basis that it is in working order, and if you encounter any problems we can offer a 90-day return to base warranty.


Within the UK, we will also arrange the return postage so you are not out of pocket if a problem does arise with the unit.

Image of item

£ 88.57 (ex. VAT) 3 in stock

Interface Associates VMM-400 Ventilation Measurement Module Lab

ITEM-14412

Interface Associates VMM-400.


This item was removed from a lab during a clear out.


Good cosmetic condition.


We could not power the unit on with our 5 volt adapter (not included) but were were able to power it on with an internal CR2 / 3AH Battery (not included).


We have not tested the unit further than powering on the display.



Image of item

£ 178.13 (ex. VAT) 1 in stock

International Biotechnologies HRH 55000 Horizontal Gel Tanks Electrophoresis

ITEM-13007

This set was removed from a university lab as surplus to requirements.


We have not tested the units.

Image of item

£ 203.06 (ex. VAT) 1 in stock

Invitrogen Countess Automated Cell Counter w/ Power Supply Faulty

ITEM-05279

This cell counter has been powered on and the touch screen is broken, no matter where you press it always thinks you are pressing in the same spot therefore it is being sold as Faulty/ Spares and Repairs. This piece of equipment has come from a UK University. 

Image of item

£ 112.50 (ex. VAT) 1 in stock

Invitrogen E-Gel PowerBase Version 4 Cat no. G6200-04 Lab

ITEM-16043

Invitrogen E-Gel PowerBase Version 4 Cat no. G6200-04


This unit was removed from a university laboratory where it was surplus to requirements.


The unit powers on and is in good cosmetic condition. It has not been tested further. The power supply is not included - it was tested using our own testing adapter.

Image of item

£ 257.21 (ex. VAT) 1 in stock

Invitrogen ZOOM IPGRunner Novex Mini-Cell Electrophoresis System Lab ZM0001

ITEM-16042

This Invitrogen ZOOM IPGRunner Novex Mini-Cell Electrophoresis System was removed from a university laboratory where it was surplus to requirements.


The unit looks like it has never been used and includes the original box. It is not however sealed.



Image of item

£ 23.50 (ex. VAT) 1 in stock

Ion Laser Technology Model 5403B-240-00-2C Laser Controller

ITEM-01623

Hello and welcome to this buy-it-now sale for this Ion Laser Technology Model 5403B-240-00-2C


Volts: 240

Amps: 10


Condition:

<text>

This item is used, it is in excellent working condition. There is tape on the unit to hold the current wires together.


Delivery:

The price includes free economy delivery (3-5 working days) to Mainland UK Postcodes - but EXCLUDING the following postcodes:

</text>

  • AB31-38, AB40-52, AB54-56, AB63
  • IV1-28, IV30-32, IV36-56, IV63
  • KA27-28
  • KW1-17
  • PA20-38, PA41-49, PA60-78
  • PH4-44, PH49-50
  • PO30-41
  • TR21-25
  • BT, GS, GY, HY, IM, JE, TDCU, ZE

Returns:

We believe you will and should be satisfied with this product so if there are any problems we offer a free 28-day return policy.

VAT:

VAT Invoices are supplied with the product - VAT is included in the price and will not be added to the final price.


Seller Information Only: 


Package ID 1623

Image of item

£ 197.44 (ex. VAT) 1 in stock

iTk Dr. Kaseen Joystick FJ for Leica SP2 Confocal Microscope Lab

ITEM-14591

This iTk Dr. Kaseen Joystick FJ was removed from a Leica SP2 Confocal Microscope System where the microscope itself had a fault.


We were assured this unit was in working order but have not tested it fully at our site.


It is in good condition but has not been tested but he joystick feels tactile and responsive.

Image of item

£ 225.00 (ex. VAT) 1 in stock

ITK MCX-2 High Resolution Positioning Controller Lab Confocal Microscope

ITEM-14882

This ITK MCX-2 High Resolution Positioning Controller was removed from a confocal microscope system, where the microscope itself had a fault.


We were assured this unit was in working order, but have only tested it to power-up at our site.


It is in good used cosmetic condition.

Image of item

£ 825.00 (ex. VAT) 1 in stock

Jaeger Viasys Oxycon Pro Stress Test w/PC and Software Lab Metabolic Cart

ITEM-12725

Jaeger Oxycon Pro System With Dell Computer in great condition - originated in a working Lab in a top UK University but is now surplus to requirements.


This listing consists of:

1x Jaeger Viasys Oxycon PRO 808680

1x Viasys Isolation Transformer

1x Dell Optiplex GX620 Tower PC With Installed Software


All units from this listing power on, but were not tested any further at our site.


Items 741 to 760 of 1460