Items 781 to 800 of 1245

Image of item

£ 109.15 (ex. VAT) 1 in stock

Lot of Volac Disposable Glass Pasteur Pippete & Glass Bottles Lab Glassware

ITEM-11014

This lot was removed from a lab as surplus to requirements.

Image of item

£ 204.27 (ex. VAT) 1 in stock

Lot of Waveguide Tube Valves - 9 x Oki V10, V10A, 1 x EMI R5146, Varian X12 Lab

ITEM-09825

This large lot was removed from a university chemistry lab during a clearout.


Included is;

1 x OKI 90V10A

1 x OKI 120V10

1 x OKI 40V10

1 x OKI 47V10

2 x OKI 35V10

1 x OKI 20V10

1 x OKI 30V10

1 x OKI 24V10A

1 x Varian VA-297AN

1 x EMI R5146

1 x Varian X-12

1 x English Electrical valve BS810

1 x Ferranti VA201B

1 x Unknow Red Unit with tubes

4 x OKI Knobs

2 x EMI R9696A Bulbs

Image of item

£ 122.49 (ex. VAT) 1 in stock

Lots of 3 Isopad E66 Isomantle Labmaster Heating Mantles Lab

ITEM-09375

This set of 3 heating mantles were removed from a lab as surplus to requirements. We tested them and they appear to be in full working order.

Image of item

£ 2,998.20 (ex. VAT) 1 in stock

LSL Biolafitte 20L S/S Bioreactor Fermenter Fermentation System Lab

ITEM-09440

This system was removed from a chemical engineering lab as surplus to requirements.


We were assured it was in full working order prior to removal - but is no longer being used by them.


We have not tested the system ourselves.

Image of item

£ 97.50 (ex. VAT) 1 in stock

Luckham 4RT Rocking Table Platform Rocker Shaker Lab

ITEM-16590

This Luckham 4RT Rocking Table was removed from a university lab where it was surplus to requirements.


The unit powers on and appears to be working ok. The on/off switch is stuck on so it will require replacing.


Cosmetically it is in reasonably good, used condition.


Image of item

£ 96.70 (ex. VAT) 1 in stock

Luckham V400 Vortexer Platform Shaker Rocker Lab Multi Level

ITEM-09821

This unit was removed from a lab during a clearout.


It appears to work properly and responded to the dial. But the lower hand tightening screw on the left hand side is bent - but still appear to tighten correctly so not a major issue.


Image of item

£ 1,131.73 (ex. VAT) 1 in stock

Lumonics Mini-Q Laser System Lab

ITEM-14736

This Lumonics Mini-Q Laser System was removed from a university where it was surplus to requirements.


The lab assured us it was working when last used - however we have not tested it at our site.


It comes with a hand control unit, manual, cables and cooling hoses.



Image of item

£ 94.25 (ex. VAT) 1 in stock

MacConnell Research Mini-Prep 96 Model - MP-9600 DNA Purification System Lab

ITEM-17583

This MacConnell Research Mini-Prep 96 Model - MP-9600 DNA Purification System was removed from a lab during a clearance.


The unit powers on but we were unable to test it further. It is in good cosmetic condition but has some light marks from use.




Image of item

£ 225.00 (ex. VAT) 1 in stock

Macherey-Nagel Nucleobond, Nucleospin, DNA, RNA & Protein Purification Parts

ITEM-18867

Lot of Macherey-Nagel DNA, RNA and Protein Purification Accessories.


These were removed from a university lab where they were surplus to requirements.


All the units are unused.


Included are;

5 x NucleoBond Xtra Midi

5 x NucleoBond Finalizer Packs( 4 Packs of 50, 1 pack of 18)

7 x Plastic Washer Packs (6 Packs of 10, 1 pack of 5)

1 x Nucleospin Filter Pack (4 in pack)

1 x Redissolving Buffer Tris 60ml


Image of item

£ 357.14 (ex. VAT) 1 in stock

Machining Bench + SSEPBM 40DD Thomson Bearing, Clarke SHHH2 & 112M/4 Motor

ITEM-16850

This rig was removed from a university physics workshop as surplus to requirements.


It is some kind of inhouse build from a variety of off the shelf parts - we do not know its originally intended purpose. Might be more useful as a strip-down for parts or possibly could be used for a variety of purposes.


Price negotiable - all reasonable offers considered, and we can also quote for shipping if required.


Key identifiable parts include:


1 x Clarke Shhh 2 Pump, powers up and runs.

Not tested any further.


1 x Clarke 112 1/4 Motor.

Unable to test.


1 x TEC Motor.

1203-002

MOT ML100L 1-4.

Unable to test.


Image of item

£ 93.75 (ex. VAT) 1 in stock

Magnus Dentistry Reference Metal Calibration Set C. & L. E. Attenborough Dental

ITEM-13618

This set was removed from a dental hospital during a store room clearout.


It appears to be a reference metal kit for dentistry work - but we are unsure of exact purpose.


We have not tested the set.

Image of item

£ POA 1 in stock

Major Science MP-300V Electrophoresis Power Supply & Bio-Rad Protean II Gel Tank

ITEM-20167

Major Science MP-300V Electrophoresis Power Supply & Bio-Rad Protean II Gel Tank


This was removed from a university lab where it was surplus to requirements.


The power supply powers up but has not been tested. The gel tank has not been tested at all.


Both units are in reasonably good cosmetic condition with some marks from use.

Image of item

£ 67.72 (ex. VAT) 1 in stock

Marconi Instruments Universal Bridge TF 2700 Lab

ITEM-15993

This Marconi Instruments Universal Bridge TF 2700 was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good condition but has been previously used.


We have not tested the unit.


Image of item

£ POA 1 in stock

Markes Unity Thermal Desorber MKIUNITY & Manual Lab

ITEM-19422

This Markes Unity Thermal Desorber was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further.


It is in reasonably good cosmetic condition but has some marks from use. The top panel is quite loose.


It comes with a user manual and a bag of spares.








Image of item

£ POA 1 in stock

Matrix Super Sealer, Cat No 4110 for Plates, Blocks and Tubes Lab

ITEM-20202

This Matrix Super Sealer, Cat No 4110 was removed from a university lab where it was surplus to requirements.


The unit powers up using a 24V DC adapter (not included). It has not been tested further.


It is in good cosmetic condition with only overly light usage marks.





Image of item

£ 225.00 (ex. VAT) 1 in stock

MBE Shaft Encoder Model EW1260 Lab From Balzers UMS 630 UHV

ITEM-15970

This MBE Shaft Encoder Model EW1260 was removed from a Balzers UMS 630 UHV Thin Film Deposition Chamber.


The item powers on and appears to be working but we were unable to test it further.


Cosmetically it is in very good condition.

Image of item

£ 2,513.72 (ex. VAT) 1 in stock

MBRAUN MB-SBS Solvent Purifier With 2012C-02 Pump Lab

ITEM-17010

THis MBRAUN MB-SBS Solvent Purifier was removed from a university lab where it was surplus to requirements.


The pump on the shelf powers up and sounds like it is running. The unit has not been tested further than this.


It is in very good condition with very limited signs of usage.


There are 7 solvent canisters supplied with it in the cabinet below.





Image of item

£ 878.01 (ex. VAT) 1 in stock

MDS Sciex Quiet Enclosure Vacuum Pump Enclosure + Varian DS 602 Pump Lab

ITEM-14661

MDS Sciex Quiet Enclosure With Varian DS 602 Pump.


Unit was removed from a lab as surplus to requirements.


The Varian DS 602 pump looks in good condition and sounds like it is running well when briefly tested but we did not use a vacuum gauge on the unit. It will likely require basic servicing, oil change etc.


Varian DS 602 pump: 949-9335S001.

Serial No: 221931.


MDS Sciex Enclosure:

Serial No: 30308570387


Unit powers on and is in good condition.


The foam inside the enclosure has started to decay a little - we removed the worst of this.



Image of item

£ POA 1 in stock

Mechtric Stevens CR Texture Analyser Lab

ITEM-18889

This Mechtric Stevens CR Texture Analyser was removed from a university lab where it was surplus to requirements.


The unit powers up and runs. The Test head moves up and down when pressing start/stop. It has not been tested further.


It is in reasonably good cosmetic condition but has some marks from use.



Image of item

£ POA 1 in stock

Metaserv Automatic Mounting Press Unit C1960A & 2 x Specimen Storage Cabinets

ITEM-18890

Metaserv Automatic Mounting Press Unit C1960A & 2 x Specimen Storage Cabinets


This unit was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further. The unit is in reasonably good cosmetic condition but one of the brass handles has come off and won't screw back in.


Included is;


1 x Metaserv Automatic Mounting Press Uni (Model - C1960A) with a Moulding unit on top (Model - C1962A).


2 x Storage Cabinets (One has a handle, one does not.)


Cabinet without handle:

Dimensions - L46 X W39 X H46cm

10 Drawers - Each fitted with a Specimen tray with 50 x 34mm slot holes, 3 trays have a Silica Gel Desiccator inside.

The Cabinet door closes but doesn't click in properly.


Cabinet with handle:-

Dimensions - L49 X W39 X H46cm

10 Drawers - 9 fitted with a Specimen Tray with 38 x 42mm slot holes, no silica desiccators. 1 empty drawer.



Items 781 to 800 of 1245