Items 801 to 820 of 1461

Image of item

£ 3,037.50 (ex. VAT) 1 in stock

Kendro Heraeus Cytoperm 2 CO2 Incubator Lab

ITEM-13723

This unit was removed from a lab as surplus to requirements.


Unit has been tested at 37C and 50C and appears to work as it should.


We have not tested the CO2 functions.


Image of item

£ 210.20 (ex. VAT) 1 in stock

Kern & Sohn EW 820-2NM Precision Laboratory Balance Lab Weighing Scales

ITEM-11349

This precision balance was removed from a university lab as surplus to requirements.


The unit is approx .27 over on our 200g calibration weight and .64 over on the 500g weight (weights not included) so unit is fairly good but may need a calibration depending on your work requirements.


The unit does not include a power supply cable - it runs on a 200ma 9v DC Cable- we used one of ours to test the scale, but it is not included with the item.


Image of item

£ 257.21 (ex. VAT) 1 in stock

Kern 442-512N Analytical Balance Weighing Scales Lab

ITEM-11000

This unit was removed from a lab as surplus to requirements.


The unit provides a reading, but is a little out compared to our weight standards (please note the weights are not included).


Therefore the unit requires some calibrating prior to use.

Image of item

£ 338.89 (ex. VAT) 2 in stock

KERN ABJ-NM/ABS-N Precision Scales Electronic Balance ABJ 220-4NM Max 220g Lab

ITEM-15803

This KERN ABJ-NM/ABS-N Precision Scales /Electronic Balance was removed from a university laboratory where it was surplus to requirements.


The unit powers on and appears to be working. It has been tested and seems to be working reasonably accurately, but will need recalibrating most likely. The unit is supplied with a PSU.


The unit measures to a max of 220g and has a readability of 0.1mg


It is in reasonable condition but has been well used.


Please note that we have multiples of this item in stock. You may not receive the exact one in the photos, but the others in stock are very similar condition - if you would like to see photos of the exact unit prior to dispatch just let us know.



Image of item

£ 67.50 (ex. VAT) 1 in stock

Keysight Technologies N2140A Oscilloscope Passive Voltage Probe 200MHz Lab

ITEM-14833

This Keysight Technologies N2140A Oscilloscope Passive Voltage Probe was removed from a university where it was surplus tor requirements.


The unit is in good condition but has not been tested.


Specs:

200Mhz.

Passive Probe.

10:1 200Mhz.

10Mohm//15pF.

1:1 6Mhz.

1Mohm//100pF.



Image of item

£ 96.45 (ex. VAT) 1 in stock

Kinematica Polytron GmbH Cell Disrupter Homogeniser Faulty Spares / Repair

ITEM-04308

Kinematica Polytron GmbH Cell Disrupter Homogeniser originated in a working Lab in a top UK University and came to us as part of a Lab clear out


The power supply works but the Homogeniser does NOT power on.

 

This item is 110V so will require a transformer which is NOT included.

Image of item

£ 128.61 (ex. VAT) 1 in stock

Kobold OVZ-30-II Oval Gear Flowmeter With Red Lion Digital Meter

ITEM-10742

This flowmeter was removed from a lab as surplus to requirements. We have powered the unit on but not tested it further.

Image of item

£ 74.25 (ex. VAT) 1 in stock

Kodak IBI Base Runner Nucleic Acid Sequencer Lab

ITEM-13236

This unit was removed from a lab during a clearout.


We have powered on the unit but not tested it further.


kodak base runner unit. 3 wheeled reservoirs and 2 base reservoirs included.


Unit is in reasonable condition.

Image of item

£ 16,402.50 (ex. VAT) 1 in stock

Kurabo FlexStar Automated DNA Isolation System Lab. Bought for £90k in 2015.

ITEM-09739

This system is being sold on behalf of one of our university customers.


The system is in full working order, complete with software, and was purchased in October 2015 for £90,000+VAT.


If you are interested in the system and have any questions or want to make an offer please just get in touch.



Image of item

£ 610.88 (ex. VAT) 1 in stock

Kvarz Millimeter Wave Synthesizer

ITEM-09836

This system was removed from a university chemistry lab as surplus to requirements.


Whilst we have only tested the unit to power-on, the lab assured us the unit was in full working order when last used.

Image of item

£ 64.31 (ex. VAT) 1 in stock

L.H Fermentation 500 Series 3 503 Air Control Lab

ITEM-09221

This unit was removed from a lab during a clearout.


The unit is untested as we do not have a power supply for it.

Image of item

£ 56.25 (ex. VAT) 1 in stock

L.H Fermentation Ltd PH / REDOX Controller Lab

ITEM-03141

LH Fermentation PH/REDOX Fermentation Controller

Image of item

£ 54.21 (ex. VAT) 1 in stock

Lab Pump / Motor N 726.3.ft.18 0,9A, 230V, 0.15kW

ITEM-10099

This unit was removed from a lab during a clearout.


We have powered the unit on but not tested it further. Presumably some refurbishment will be needed.

Image of item

£ 15.00 (ex. VAT) 1 in stock

Lab Tubing Control Board Gas Water Fluid Teaching Chemistry

ITEM-10016

This board was removed from a lab as surplus to requirements.


We have not tested the unit.

Image of item

£ 131.62 (ex. VAT) 1 in stock

Lab Yellow / Hazardous Chemical Cabinet

ITEM-09388

This unit was removed from a lab as surplus to requirements.


It appears to be in good condition.

Image of item

£ 32.15 (ex. VAT) 1 in stock

Lab-Line Instruments Multi-Blok Heater # 2093 115V 200W w/ 3 Blocks Working Lab

ITEM-04300

This Lab-Line Instruments Multi-Blok Heater Model no 2093 was removed from a working Lab in a top UK University.  It has 2 x 20 well blocks and 1 x 12 well block.  It has a High and Low heat setting with individual variable heat controls.  The heater easily reached 60°C when tested.  


The unit is fitted with an American style plug (115V) and a transformer or adapter is NOT included.

Image of item

£ 112.50 (ex. VAT) 1 in stock

Lab-Quatec Gastorr GT-103 Degasser Lab HPLC

ITEM-15303

This Lab-Quatec LABOC Gastorr GT-103 Degasser was removed from a laboratory during a clearance.


The lab informed us it was working when last used.


The unit powers up and it sounds like the pump is working, it however has not been tested any further than this. It's in good condition but shows some signs of use.



Image of item

£ 96.65 (ex. VAT) 1 in stock

LabCaire Aura 750E Filter Fume Cupboard Hood / Fume Cabinet Lab - Spares Repair

ITEM-15891

This LabCaire Aura 750E Fume Hood/Fume Cabinet was removed from a laboratory due to a fault.


The lab reported that it was no longer pulling air through and they did not know why - so it was sold as spares / repairs.


The cabinet is in heavily used, cosmetic condition and the fibreglass of the working tray is exposed in a few places. The stand also has quite a few surface rust marks although most of this will clean off. The perspex front is also slightly broken.


The fume hood itself is in reasonable, used condition and it powers up. The fans run and the lights work, but it will need filters.


Please enquire if you would like a shipping quote.

Image of item

£ 64.31 (ex. VAT) 1 in stock

Labconco 4330100 Bench-Top Gel Dryer Lab

ITEM-12192

This unit was removed from a lab during a clearout.


The unit appears to work as it should. The accessories may not be related to the unit - but were included with the item during the clearout.


The unit is missing all its feet.


Image of item

£ 48.23 (ex. VAT) 1 in stock

Labconco Benchtop Gel Dryer

ITEM-04837

Labconco Benchtop Gel dryer, includes power cord and silicone cover. 

Items 801 to 820 of 1461