Laboratory Equipment
Items 821 to 840 of 1278

£ POA 1 in stock
Major Science MP-300V Electrophoresis Power Supply & Bio-Rad Protean II Gel Tank
ITEM-20167
Major Science MP-300V Electrophoresis Power Supply & Bio-Rad Protean II Gel Tank
This was removed from a university lab where it was surplus to requirements.
The power supply powers up but has not been tested. The gel tank has not been tested at all.
Both units are in reasonably good cosmetic condition with some marks from use.

£ 73.45 (ex. VAT) 1 in stock
Marconi Instruments Universal Bridge TF 2700 Lab
ITEM-15993
This Marconi Instruments Universal Bridge TF 2700 was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good condition but has been previously used.
We have not tested the unit.

£ POA 1 in stock
Markes Unity Thermal Desorber MKIUNITY & Manual Lab
ITEM-19422
This Markes Unity Thermal Desorber was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further.
It is in reasonably good cosmetic condition but has some marks from use. The top panel is quite loose.
It comes with a user manual and a bag of spares.

£ 225.00 (ex. VAT) 1 in stock
MBE Shaft Encoder Model EW1260 Lab From Balzers UMS 630 UHV
ITEM-15970
This MBE Shaft Encoder Model EW1260 was removed from a Balzers UMS 630 UHV Thin Film Deposition Chamber.
The item powers on and appears to be working but we were unable to test it further.
Cosmetically it is in very good condition.

£ 2,926.11 (ex. VAT) 1 in stock
MBRAUN MB-SBS Solvent Purifier With 2012C-02 Pump Lab
ITEM-17010
THis MBRAUN MB-SBS Solvent Purifier was removed from a university lab where it was surplus to requirements.
The pump on the shelf powers up and sounds like it is running. The unit has not been tested further than this.
It is in very good condition with very limited signs of usage.
There are 7 solvent canisters supplied with it in the cabinet below.

£ 932.58 (ex. VAT) 1 in stock
MDS Sciex Quiet Enclosure Vacuum Pump Enclosure + Varian DS 602 Pump Lab
ITEM-14661
MDS Sciex Quiet Enclosure With Varian DS 602 Pump.
Unit was removed from a lab as surplus to requirements.
The Varian DS 602 pump looks in good condition and sounds like it is running well when briefly tested but we did not use a vacuum gauge on the unit. It will likely require basic servicing, oil change etc.
Varian DS 602 pump: 949-9335S001.
Serial No: 221931.
MDS Sciex Enclosure:
Serial No: 30308570387
Unit powers on and is in good condition.
The foam inside the enclosure has started to decay a little - we removed the worst of this.

£ POA 1 in stock
Mechtric Stevens CR Texture Analyser Lab
ITEM-18889
This Mechtric Stevens CR Texture Analyser was removed from a university lab where it was surplus to requirements.
The unit powers up and runs. The Test head moves up and down when pressing start/stop. It has not been tested further.
It is in reasonably good cosmetic condition but has some marks from use.

£ 230.96 (ex. VAT) 1 in stock
Met Prep 201 Grinder Polisher Lab
ITEM-08586
This unit was removed from a lab as surplus to requirements and we were assured the unit was in working order prior to removal from the lab
However, we have only tested it to power-on ourselves.
Therefore we are happy to sell the unit on the basis that it is in working order, and if you encounter any problems we can offer a 90-day return to base warranty.
Within the UK, we will also arrange the return postage so you are not out of pocket if a problem does arise with the unit.

£ POA 1 in stock
Metaserv Automatic Mounting Press Unit C1960A & 2 x Specimen Storage Cabinets
ITEM-18890
Metaserv Automatic Mounting Press Unit C1960A & 2 x Specimen Storage Cabinets
This unit was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further. The unit is in reasonably good cosmetic condition but one of the brass handles has come off and won't screw back in.
Included is;
1 x Metaserv Automatic Mounting Press Uni (Model - C1960A) with a Moulding unit on top (Model - C1962A).
2 x Storage Cabinets (One has a handle, one does not.)
Cabinet without handle:
Dimensions - L46 X W39 X H46cm
10 Drawers - Each fitted with a Specimen tray with 50 x 34mm slot holes, 3 trays have a Silica Gel Desiccator inside.
The Cabinet door closes but doesn't click in properly.
Cabinet with handle:-
Dimensions - L49 X W39 X H46cm
10 Drawers - 9 fitted with a Specimen Tray with 38 x 42mm slot holes, no silica desiccators. 1 empty drawer.

£ 300.00 (ex. VAT) 1 in stock
MetriGenix MGX 2000 Hyridization Station Model - HYB STA 1 Lab
ITEM-19845
This MetriGenix MGX 2000 Hyridization Station Model - HYB STA 1 was removed from a lab where it was surplus to requirements.
The unit powers up but we were unable to test it further.
It is in reasonably good cosmetic condition but there is a mark/damage to the screen.
The unit comes with a manual and several other boxed accessories (everything on the included shipping list is still with the system).

£ 375.00 (ex. VAT) 1 in stock
Metrohm 702 SM Titrino Volumetric Titration System Lab Spares or Repairs
ITEM-17146
This Metrohm 702 SM Titrino Volumetric Titration System was removed from a university lab where it was surplus to requirements.
The unit is in reasonable condition but is fairly heavily used. It has a lot of marks and stains. The plastic lever on the front of the tray for the bottle attachment has snapped off.
It powers up but is working very inconsistently. Sometimes it shows an 'error 3' message and sometimes it will not show anything on the screen at all. The attached stirrer appears to work quite well. We looked into the 'error 3' message and it means the system adjustment data has been overwritten. The error will appear every time until it has been re-adjusted.
The system comes with the remote keyboard 6.2132.010 and a Seiko thermal printer. This has not been tested as it requires a separate PSU which is not included.
The unit is sold for spares or repairs.

£ POA 1 in stock
Metrohm Autolab Rotator System - IME663, PGSTAT302N, MotorController Lab
ITEM-19328
This Metrohm Autolab Rotator System was removed from a university lab where it was surplus to requirements.
The units are all in good cosmetic condition but have some marks from use.
The system consists of;
1 x Metrohm Autolab PGSTAT302N.
This powers up fine and connects to the PC via USB. It was not tested any further.
1 x Metrohm Autolab Motorcontroller For Rotator.
The unit powers up fine but was not tested further. It is missing one plastic foot.
1 x Metrohm Autolab Rotator.
With 6.1414.010 stand & 6.1415.340 Glass Container.
The rubber seal on the container lip will require replacement as it is old and split. It has not been tested.
1 x Metrohm Autolab IME663.
The unit powers up fine but was not tested any further.
1 x HP ProBook Windows 7 Laptop.
Comes with Autolab Nova software installed. Original HP discs & PSU are supplied with the unit. All user data and passwords have been removed.
1 x Plastic box of spares and parts.
It should include all cables to connect the units up and a few small spare parts.

£ 2,391.82 (ex. VAT) 1 in stock
Metrohm Polarograph 663 VA Stand & Stirrer, Autolab IME663, Potentiostat, Lab
ITEM-18333
This Metrohm 663 VA Stand, Autolab IME663 Interface for was removed from a university lab where it was surplus to requirements.
The units are in a good used condition but have slight marks from use.
The lot contains:
1 x Metrohm VA Stand 663 Unit.
1 x Autolab IME663.
1 x Autolab Type 3 Patentiostat/Galvanostat.
1 x Stand Ring For Titration Vessels 6.2703.000.
1 x Ultra Trace Electrode Tip 6.1204.180.
1 x Gold Electrode Tip 6.1204.140.
3 x Needles For MME 6.1247.020.
1 x Plastic Ring For the MME Pro.
2 x LL Ag/AgCl Reference Electrodes 6.0728.040.
1 x Autolab Dummycell 2.
1 x Plastic Accessory With Sponge inside.
1 x Hg Drop Catcher 6.2406.000.
1 x Stopper For MME Opening On VA Stand 6.2709.040.
1 x Specific Metal Frame.
1 x Stopper For Stirrer Opening On VA Stand 6.2709.050.
2 x Black Clips.
1 x Red Clip.
1 x Driving Axle For Rotating Disk Electrode (Item looks like 6.1204.210 but is numbered 6.1246.020).
1 x Contact Pin 6.2103.110.
1 x Filling Tube For MME 6.1817.000.
2 x Driving Belts 6.1244.020.
8 x Silanized Capillaries For MME 6.1226.050.
1 x Bag Labelled Receptacle For Reference Electrode.
1 x Nova Getting Started Manual.
1 x Silanized Capillaries For MME Info Leaflet.
1 x LL Ag/AgCl Reference Electrodes Info Leaflet.
1 x Ultra Trace Electrode Tip Info Leaflet.
1 x Mouse Pad.
1 x Instrument Inspection Certificate.
Multiple Quality Certificates.
1 x 663 VA Stand Instruction Manual.
1 x Metrohm Application Bulletin.

£ POA 1 in stock
Mettler AE163 Analytical Laboratory Balance Scales
ITEM-18098
This set of Mettler AE163 Analytical Laboratory Balance Scales was removed from a university lab where it was surplus to requirements.
The unit powers on and has been calibrated. We tested it with 100g/20g/10g weights. It appears to be fairly close to displaying the actual weights correctly.
It is in reasonable cosmetic condition but with lots of marks and scuffs.

£ 135.81 (ex. VAT) 1 in stock
Mettler Toledo Berger SFC Analytix and MiniGram Automatic Liquid Sampler Model 7
ITEM-08467
This system was removed from a lab as surplus to requirements. It has been powered on but not tested further.

£ 127.60 (ex. VAT) 1 in stock
Mettler Toledo H35AR 160G Laboratory Analytical Scale Balance Lab
ITEM-07926
This unit was removed from a lab as it was surplus to requirements.
The unit appears to work but may require calibration prior to use.

£ 1,875.00 (ex. VAT) 1 in stock
Mettler Toledo LabMax Automatic Lab Reactor + ATB VAFU 71/4B-7 Pump Lab
ITEM-07207
This Mettler Toledo LabMax Automatic Lab Reactor with ATB VAFU 71/4B-7 Pump Lab was removed from a university laboratory where it was surplus to requirements.
We were unable to power the unit on but it is in good cosmetic condition with light marks and scratches.
Included with it are a pump/stirrer, an emergency stop button, and some cables.

£ 290.42 (ex. VAT) 1 in stock
MGE SAM 12 Suction Machine Static High Vacuum Flow Lab
ITEM-10741
This unit was removed from a lab during a clearout. The lab manager believed this unit was working when last used - at our site we have tested it to power-on but not further.

£ 1,465.23 (ex. VAT) 1 in stock
Microm HM 335 E Electronic Microtome Lab
ITEM-16953
This Microm HM 335 E Electronic Microtome was removed from a university lab where it was surplus to requirements.
The unit powers up and the dial lights up. The manual controls all work smoothly. It has not been tested further.
It is in good cosmetic condition with some marks from use.

£ 1,319.26 (ex. VAT) 1 in stock
Microm Model HM325 Manual Rotary Microtome Lab
ITEM-16954
This Microm Model HM325 Manual Rotary Microtome was removed from a university lab where it was surplus to requirements.
The unit operates smoothly but has not been tested with samples.
It is in good cosmetic condition with some marks from use.
Items 821 to 840 of 1278