This Oregon Scientific Professional Weather Centre WMR200 was removed from a university lab where it was surplus to requirements.

The main unit powers up with 4 x AA Batteries (Not Included). It has not been tested further.

Included in the system is;

1 x WMR200 Weather Centre,

1 x Software Disk with "Weather OS Ver. 1.1"

1 x Remote Wind Sensor WGR800

1 x Remote Rain Sensor PCR800

1 x Remote Temperature/Humidity Sensor THGN801

1 x Wall/Mast Mount

It all comes in a box and is in good cosmetic condition with only minor marks.

This Oriel Corporation 8500 Arc Lamp Power Supply & Model 6137 UV Lamp was removed from a university lab where it was surplus to requirements.

The units have not been tested as all cables have been cut short on them. They are in reasonably good cosmetic condition with some marks from use.

They are sold as spares or repairs as they will need some degree of re-wiring before they can be used.

This Orthodyne Electronics Ultrasonic Heavy Wire Bonder Model 20 was removed from a university lab where it was surplus to requirements.

The unit powers up and both the lamps work, but it has not been tested further. The lab informed us that the unit was working but just wasn't needed.

It is in reasonably good cosmetic condition with some marks from use.

It comes with a copy of the instruction manual on disc and also in a folder.

Also included;

2 x Bausch & Lomb eyepieces 10 x W.F.Stereo 31-15-71.

Treadlite 2 Pedal Cat no. T-91-S

This Osprey Spray Plant was removed from a university engineering workshop as surplus to requirements.

We can access engineering drawings, wiring diagrams, and other paperwork to enable it to be rebuilt in its original specification, it would however need a supply of molten metal and a suitable extract system to complete a full process.

The key parts included are as below:

• Spray Chamber, Stainless Steel 2m. x 1.3m. x 2.2m. high. 750Kg.
• Spray Chamber Stand 2m. x 1.3m. x 1.75m. high. 250Kg.
• Spray Chamber Lid 1.85m. x 1.3m. x 0.6m. high. 200KG
• Nozzle mounting plate, 1.1m. x 1.3m. x .3m. high 100KG
• Rotation Shaft, 200mm. Dia. X 2.4m. long. 75KG
• Extract Pipework, Misc. SS Pipes on pallet. 50Kg.
• Electrical Cupboard CP1, 1200x600x2000mm.
• Electrical Cupboard CP2, 600x500x1600mm.
• Gas Panel GP1, 1200x600x2000mm.
• Gas Panel GP2, 1200x500x1580mm.
• Pallet of Cables.
• Box of papers, Manuals, wiring diagrams, gas schematics, and misc. data.
• Pallet of drive motors.
• Nozzle Plate Adaptor.
• Pallet of misc. Drive Gear.

This is not a complete list, just major parts, all weights are estimates

Because the delivery is a full load of pallets, we would need to quote you for delivery - so please enquire.

This Oxford Instruments 3120 Temperature Controller was removed from a university where it was surplus to requirements.

The unit powers on but has not been tested further.

It is in good condition but has been previously used.

This Oxford Instruments Andor Micropoint System was removed from a university lab where it was surplus to requirements.

All the units are in good cosmetic condition but have marks from use.

Included is;

1 x Dell Precision T3500 PC.

It comes with a keyboard & mouse but no monitor is included.

The following software is installed:

Andor iQ & iQ2.

Broadcom Advanced Control Suite 3

iQ OpenSource: Image J, Jython2.5.0 & Python 26/iPython.

It also comes with iQ & iQ opensource on disc and some Dell DVD's including Windows 7. The PC is currently running XP. A dongle is also included with the PC.

1 x Andor DR-328G-C01-SIL with PSU.

It powers up fine but was not tested

1 x Micro Point 337-USAS with PSU.

It powers up fine but was not tested

1 x Micro Point ASE-04900 with MP-2204-EBD and PSU.

It powers up fine but was not tested

It also comes with various USB and power cables.

Removed from a university lab store room during a clearout.

We are unable to test this ourselves but it was removed as surplus to requirements rather than for disposal.

This Oxford Instruments Link Pentatest Model 6647 ATW2 10mm2 EDS X-Ray Detector was removed from an SEM laboratory where it was surplus to requirements.

The unit is in good condition but has not been tested.

Model - 6647

DET AREA - 10mm2

WINDOW - ATW1

RESOL AT 5.9KeV - 133 eV

<a href="http://att.no/" style="color: rgb(54, 65, 76);">ATT.No</a>. - 32FC55814 0110105.

S/S -6.70v

This Oxford Magnetic Field Cancelling System was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has been previously used.

We have powered it up and the LED screen came on as 0.0, and the Power Loss, Milligaus and AC-RMS lights came on. Tested the Reset, Trip Level, HX, HY, HZ, G/T, DC/AC, X10, X100 switches and they all worked in terms of activating different lights on the interface. It has not been tested further than this.

This Oxford Instruments Plasmalab 80 Plus System was removed from a university lab where it was surplus to requirements.

The system has not been tested but we were informed by the lab that it was replaced because they needed more gas inputs.

Everything is in reasonably good cosmetic condition with some marks from use.

Included with it are;

1 x PC & Monitor

HP Vectra VEi8 7/500 DT

Product no. HP D8184ARR

Windows 95

The unit wouldn't power on at first but after a couple of minutes it turned itself on. The front cover is missing. Has software program Oxford Plasma Technology Version 2.57.91

We have the user names & passwords.

HP 17" Monitor

Model - D8901A

It powers on and is in a reasonable used condition.

1 x Iomega Zip DrivebModel - Z250P

1 x Advanced Energy RFX 600A

Model no. 3155082-231 A

The Item powers on but the switch on the back is faulty so the unit powers on as soon as a power lead is inserted. It was not tested further.

This Oxford Instruments SuperAmp Power Amplifier was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition with only light marks from use.

It powers up but has not been tested further.

This Oxford Magnetic Field Cancelling System was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has been previously used. There is a large scrape down the back of the unit, but this is purely cosmetic.

We have powered it up and the LED screen came on as 0.0, and the Power Loss, Milligaus and AC-RMS lights came on. Tested the Reset, Trip Level, HX, HY, HZ, G/T, DC/AC, X10, X100 switches and they all worked in terms of activating different lights on the interface. It has not been tested further than this.

This Oxford TIP Etch Controller was removed from a university lab where it was surplus to requirements.

The unit powers on but we were unable to test it further. It is in reasonably good condition but it has been previously used.

This unit was removed from a university lab where it was surplus to requirements.

We have not been able to test this unit at our site but it was removed from a working environment.

It is in good condition but has been previously used.

This unit was removed from a lab as surplus to requirements. We were assured the unit is in full working order. However, there is no additional accessories, software , cables or manuals other than those shown in the photographs.

This system was removed from a lab as surplus to requirements.

We were assured the unit was in full working order when last used.

System includes:

Minitrak V System (Serial no: 427903) – see photo attached

Liquid handling platform - 96 tip head (200 µL)

Reasonable condition, some wear and tear and not been used for a few years.

4 stackers and conveyor belt system

6 position deck bed behind conveyor

Tip wash station, 20 L supply/return containers and peristaltic pump for operation (stored underneath)

Automatic tip loading and chute for tip disposal

Barcode scanner

Spare parts, tips and accessories kit

Does not include - an air compressor or computer/software

Along with the main unit, there are several parts and accessories.

4 x Maintenance/hardware kits.

4 x Boxes of P-235 Pipette tips 235ul

1 x Sealed bag of tubing and tip-wash accessories

1 x Masterflex pump (powers on and functions well)

Leads and power cables.

System is set as pallet delivery, but this is on the assumption you have a forklift to unload at your side and that we are able to book it for delivery on a double pallet (kerbside only).

We can certainly arrange delivery where forklift isn't available or where you need it brought into a lab etc - please enquire about this.

Packard BioScience MultiPROBE II EX Automated Liquid Handling System.

This item was removed from a university lab as surplus to requirements. The lab informed us that it was left behind from the previous department - believed to be working but never used by them.

The unit powers on and is in good cosmetic condition.

Dispenser 3 seems like it may have seized up.

As it is was detached and we cannot get it to fit back on properly.

We are unable to test any further.

No PC or software is included.

This item originated in a working Lab in a top UK University and has come to us as part of a Lab Clear Out.

This unit powers on but due to the nature of item we are unable to test further.

Packard MassPREP Station Proteome Works Robotic Protein Handling System.

This item was removed from a lab as surplus to requirements. It has been stored fully setup on the lab ready to go so we didn't anticipate any problems.

The main Massprep unit unfortunately does not power on.

Upon testing, the unit tripped our main circuit breaker.

And blew the IEC cable fuses.

So it will require a full electrical service prior to use.

It comes with a large amount of consumables.

As well as a Packard plate heater. (This unit does power on)

There are manuals and software included (both on disc and installed on the PC)

The PC powers on and has been wiped of all user data but the MassPrep software remains on the PC and is also included on disc.

Pipette tips and some spare parts also included.

Please see photos for more details.

We can supply many more detailed photos if required.

This unit was removed from a lab as surplus to requirements.

We were assured it is in full working order but we do not have any software to be able to test it. Therefore we have only been able to test it to power-on.