This Robbins Scientific AP Wash Module with Automated Positioner was removed from a lab where it was surplus to requirements.

The units are in good used cosmetic condition but they do have some signs of general use. The AP Wash Module powers up and the pumps appear to work as they should.

Both parts come in the original box.

Also included are;

3 x Serial Cables.

1 x Robbins V-Groove Reservoir.

1 x Unknown White Plastic Tray.

Various lengths of tubing.

This system was removed from a lab as surplus to requirements.

The lab manager assured us this unit was in working order. We have powered on the unit but not tested it further at our site.

There is a large collection of accessories included - we are limited to only including 12 photos on eBay, but there are more accessories than shown in the photos - please enquire for more details.

This Roche MagNA Pure 96 & Roche Hamilton FLOW PCR System was removed from a university laboratory where it was surplus to requirements.

The two machines are:

1. Hamilton Robot – used for removing samples from tubes into 96 well plates and setting up PCRs
2. Magnapure96 – extraction robot that can perform 96 extractions in around 1hr-1hr30 mins

We also have the flow flex software that has never been installeded – this can read the barcodes on the initial sample tubes and track them through the whole process.

The department had purchased the system under a service contract, which the machine is covered with via Roche until 21st September 2022.

The department calculated that the remaining value on the service contract was £15k. We have allowed for this value in our asking price, but if we find that Roche will not complete works for any reason, we can adjust our price accordingly - so please consider that our current asking price includes £15k of servicing from Roche. At the very least this should include a part-maintenace and setup.

Included in the system is:

1 x Roche MagNA Pure 96 Unit.

The unit is in good, used cosmetic condition but it does have a piece broken off the back casing. It will not affect the operation of the unit. The part is with it, so could probably be glued back on.

The unit powers up fine but we were unable to test any further.

The cupboard below the main unit contains the following items:

2 x Yellow plastic waste containers.

1 x MagNA Pure 96 system fluid (External) container.

Appears to be partly used.

3 x MagNA Pure 96 System Fluid (Internal) containers.

New and unused (Nov 2018)

1 x MagNA Pure 96 System Fluid (Internal) container.

Used/Empty.

1 x Box 05142512001 Deckplatte Waste.

Possibly full and unused box.

1 x Box Drop Catcher 96 Wannenset.

Roche REF 05667682001

Hamilton REF 184056.

Appears to be new and unused.

1 x Box MagNA Pure Sealing Foil.

REF 06241638001

100 Foils.

New and unused, sealed packet.

6 x Packs of Roche MagNA Pure 96 Output Plates.

Ref 06 241 611 001

Each pack contains 5 Plates.

New and sealed.

1 x Bag of Cobas Secondary Tubes 13x75

1 x Bag of 'Set of 8 Stop Disk Px'

Roche REF 04824334001

Hamilton REF 183061.

1 x Bag of 'Set of 8 Core O-Ring'

Roche REF 0424121001

Hamilton REF 183060

2 x Roche Retrofit External Fluid Kits.

The following software:

Roche Flow software boxed.

Hamilton Venus Two Software service pack 1 and base package 4.3.

Hamilton Microlab STAR IVD & STARlet IVD version 3.2.x

1 x Hamilton/Roche FLOW PCR Setup.

Unit powers up fine.

Unable to test any further.

1 x HP Core i5 PC with Roche Software.

Appears to be for the FLOW PCR.

Has the following software installed:

Hamilton Microlab Star Software Venus Two.

Hamilton ASW Standard v1.0.

Flow PSH Application v2.1.0

Microlab STAR Service.

UV Decontamination V1.3.0

1 x HP Core i5 PC wth Roche Software.

Appears to be for the FLOW PCR.

Has the following software installed:

Flow PSH Application v2.1.0.

Hamilton ASW Standard v1.0.

Hamilton Microlab Star Software Venus Two.

Microlab STAR Service.

UV Decontamination V1.3.0

1 x HP Core i5 PC.

Appears to be for the MagNa Pure 96.

Has the following software installed:

BackupModule 3.1.0.

HostModule 3.1.0.

MagNa Pure 96 3.1.1.

1 x HP Core i5 PC this one is in an open box.

It does not contain any Roche software at all.

Appears to be a standard PC.

1 x HP Core i5 & Philips Monitor.

Brand new sealed in boxes.

Labeled 'Flow CU rp5810'.

1 x Philips B-line 19" TFT/LCD Monitor.

Brand new sealed in the box.

1 x Philips Brilliance 19" TFT/LCD Monitor.

Open box, appears to be brand new.

2 x Philips 19" Brilliance 19B LCD Monitors.

Both used and unboxed but in good condition.

1 x HP Keyboard and HP Mouse.

Both used, unboxed but in good condition.

All PC's have been powered up and work as they should.

Only the one sealed in the boxes was not tested.

Hamilton CO-RE Tips 480 Tips (50ul) with Filters.

12 x sealed packs.

Hamilton CO-RE Tips 480 High Volume Tips (1000ul) with filters.

6 x sealed packs.

1 x complete but open pack.

1 x pack with only one unit that is not full.

1 x Box of MagNA Pure Tip 1000ul.

REF 0624162001.

5 x 96Tips.

Box of 7 sealed full packs.

Full box of Roche MagNA Pure 96 Output Plates.

Ref 06 241 611 001

Each pack contains 5 Plates.

The box contains 12 packets.

4 x Packs of MagNA Pure 96 Internal Control Tubes.

Ref: 06374905001.

Oct 2018.

30 tubes per pack.

I believe all packs are new and unopened.

Box of 6 x Packs of MagNA Pure 96 Processing Cartridge.

REF 06 241 603 001.

6 Cartridges per pack.

The packs are all sealed.

1 x Hamilton 4 Carrier for 24 Tubes (14.5x60-18x120mm)

Part description: SMP_CAR_24

Part No: 173400

Brand new unopened box.

1 x Hamilton 3 Carrier for 32 Tubes (11x60 - 14x120mm)

Part description: SMP_CAR_32

Part No: 173410.

Brand new unopened box.

3 x Hamilton Carrier for 32 Tubes with Inserts for EPI 2ml.

Part description: SMP_CAR_32_B with EPI Insert.

Part No: 185058.

Brand new unopened boxes.

2 x Loose Hamilton Carrier for 32 Tubes with Inserts for EPI 2ml.

SMP_CAR_32_B00

P/N: 185058/00

Without boxes and possibly used.

Good condition.

1 x Loose Hamilton Carrier.

PLT_CAR_L5MP_A00.

P/N: 189050/00

Without a box, appears used but in good condition.

1 x Loose Hamilton Carrier.

TIP_CAR_480_A00.

P/N: 182085/03.

Without a box, appears used but in good condition.

2 x Hamilton 1 Carrier for 5 racks of 96 tips.

Part description TIP_CAR_480

Part No: 1802085.

Brand new in boxes.

1 x Hamilton

REF 185295/02

Brand new in the box.

1 x Hamilton 1 Carrier for 5 MP-Plates.

Part description: PLT_CAR_L5MP

Part No: 189050.

Brand new in the box.

1 x Hamilton.

Part description: PLT_CAR_L5AC_P

Part No: 185295.

Brand new in the box.

1 x Hamilton.

Part description: PLT_CAR_L5AC_P_B

Part No: 185069.

Brand new in the box.

1 x Hamilton.

REF 198830/00

Brand new in the box.

1 x Upgrade Kit LC480 SW, Version 1.5.1.

<a href="http://mat.no/" rel="noopener noreferrer" style="color: rgb(54, 65, 76);">Mat.No</a> 06653316001.

LightCycler 480 Software Upgrade kit.

Sealed.

1 x MagNa Pure 96 Operators Guide.

3 x Tube Carrier Filling Racks.

Roche REF 04639618001

Hamilton REF 185346.

Two are brand new in boxes.

One is loose but in good condition.

1 x Pack labeled 185716.

Appears to be metal sample trays.

1 x Pack Labeled 185720.

Appears to be metal sample trays.

1 x Pack labeled 185717.

Appears to be metal sample trays.

1 x MagNA Pure 96 Processing Cartridge.

REF 06 241 603 001.

Pack of 6 but only contains 3.

1 x Hamilton Cooling Block 96

REF 185730/00.

Brand new in the box.

1 x Roche Adapter Eluate Plate.

Roche REF 07162367001.

Hamilton REF 185732.

Brand new in the box.

1 x Box of Flow Tubes (2ml)

REF 07 128 894 001.

Oct 2018.

The box appears to be quite full.

1 x Box of MagNA Pure 96 Internal Control Tubes.

REF 06374905001

Oct 2018.

The box appears to be full.

1 x Hamilton VFV Consumable Kit.

REF 182506

2018-05-16

250ml I think this is missing

3 x 96 CO-RE low, standard and high Volume Tips without Filter.

4 x Reagent Vessels.

All appear to be new and unused.

1 x Box of MagNA Pure Tube 2.0ml

REF 07857551001.

Mar 2019

10x 35 tubes 2.0ml

10 x 35 Caps.

The box appears to be full.

1 x Sick/Roche USB Barcode scanner.

IDM120-11P03

M 1061976

S 17100015.

Looks in good condition.

1 x Box of various cables.

2 x Dale UPS E202R Units.

Both appear to be used with various marks from use.

Both units power up.

1 x Dale UPS E203R+ Unit.

It appears to be used with various marks from use.

It powers up but has not been tested any further.

This Roche NumbleGen HS4 Hybridization System was removed from a laboratory where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. The temperature was set to 37DegC and the unit heated to 38.8/9DegC. It was not tested any further than this.

Part No 05786746001.

It comes with 2 x Software discs.

This Roche RTS ProteoMaster Rapid Translation System with manuals and accessories was removed from a university laboratory where it was surplus to requirements.

The unit is in good condition but has scratches and the manuals have some creases.

It has been tested at 37 degrees and at 120 rpm (Lowest RPM possible). It reached this speed and temperature.

It was also tested at 50 degrees and 600 RPM (Highest RPM and temperature possible). It reached this speed but only got to 49 degrees - though our thermometer is not externally calibrated, so easily could be variation in our thermometer.

Accessories that come with the product are:

4 x RTS Application Manual For Cell-Free Protein Expression

1 x RTS Workshop

1 x Deepwell 5.0 Adaptor.

1 x RTS 500 KPI Adaptor 3.0.

1 x 24-Pos KPI Adaptor 3.0.

1 x Probenadaptor PCR 2.0.

1 x RTS PM Insert KPI 2.0.

1 x Protocol For Lab Session.

1 x RTS 100 E.Coli HY Kit.

2 x Quick Reference Procedure

1 x RTS Wheat Germ CECF Kit

1 x ProteoExpert RTS E.Coli HY Five Calculations Software. (Unopened).

1 x ProteoExpert RTS E.Coli HY One Calculations Software.

1 x RTS ProteoMaster Instrument Operators Manual Versions 1 & 2.

2 x RTS 100 Wheat Germ CECF Kit Instruction Manual.

1 x RTS 100 E.Coli HY Kit Instruction Manual Versions 1 & 3.

This Royal Sovereign Hancocks A3 Lightbox was removed from a university lab where it was surplus to requirements.

The unit powers on and is working. It is in reasonably good cosmetic condition but has some marks and scrapes from use.

RS Tinytag Ultra 2K Indoor Temperature Data Logger With Probes & Connector.

This item was removed from a lab as surplus to requirements.

RS Tinytag Ultra 2K

PT100.

Temperature probe.

Range -50 - 300degC

RS 325-3128.

We have not tested this unit at our site but it appears to be in good condition.

Comes with probe and data cable.

Please see photos for further details.

This S&M CAHN 28 Automatic Electro Microbalance Model 10028E was removed from a university lab where it was surplus to requirements.

The unit powers up but the lamp is not working.  E3 appears on the screen when pressing the CAL button. Placing weights on the scales generates numbers but they do not match the weights placed. It probably needs some sort of calibration. It was not tested further.

S/A;HOLDER 645 DSP by Beckman Coulter. OEM#: 178746

This unit was removed from a lab where it was surplus to requirements. The unit appears to have been previously used. It is for a Beckman Coulter Flow Cytometer FC500.

It will be supplied in an incorrect packet, so please ignore the information on the packaging if purchased.

This unit was removed from a lab as surplus to requirements.

The unit powers up and display reads. Comes with 4 probe couples that are very tangled.

This Sanplatec D-BOX Desiccation Cabinet Auto-type Desiccator w/ Hygrometer & Manual was removed from a university lab where it was surplus to requirements.

The unit powers on but has not been tested further. It is in reasonable condition but has quite a large crack to the back and top of the unit. It has 2 shelves and has a missing foot. There is a Whatman Auto Desiccator manual included.

Inner dimensions:-

Depth -31cm

Width - 30cm

Height (without shelves) - 40cm

This Sanplatec Sanpla Dry-Keeper Vertical Auto-Desiccator Cabinet was removed from a university lab where it was surplus to requirements.

The unit powers up via the transformer. We could hear the fan running but it wasn't tested further.

It is in reasonably good cosmetic condition but has some marks from use.

Internal dimensions - D33.5 x W25.5 x H45cm

2 Shelves - 32 x 25cm

This Sanyo Growth Cabinet  Model  MLR-350 was removed from a university lab where it was surplus to requirements.

The unit does not power on. The plug has been cut off so we replaced it, but it would not work at all. We assume it was cut off for a reason.

It is in reasonably good cosmetic condition with marks from use.

Internal dimensions - D46.5 x W51 x H130cm

3 Shelves - 45 x 49cm

It is sold for spares or repairs.

This Sartorius Arium Pro UV Ultrapure Water Purification System was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but it has some marks from use.

It powers up but shows a lot of warnings and errors telling you to replace certain consumables. it would appear that it may require all new bulbs and cartridges.

It was not tested further.

It comes with manuals, some hoses and cables. The screen looks like it was mounted away from the main unit.

This Sartorius Basic BA 110 S Digital Lab Balance Weighing Scale was removed from a university laboratory during a clearout.

The unit would not power on so it has not been tested.

The unit has 3 sliding glass doors which function, they are the top and side glass panels. It also has 2 adjustable legs which correspond to the spirit level at the back of the product.

It is in reasonable cosmetic condition but has been previously used and has some scratches on it etc.

Unit is sold as spares/repairs.

This Sartorius BL150 S Basic Lite Portable Scale was removed from a lab where it was surplus to requirements.

The unit will show power when 12v supply is connected but it switches straight off. It does not come with a power supply.

The unit is in used condition and has various signs of use.

Unit sold as spares / repairs as we are not sure why it powers off.

This Sartorius BP61S Analytical Balance Laboratory Scales was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with our calibration weights.

200mg measured 0.1995g.

10g measured 9.9841g.

20g measured 19.9805g.

50g measured 49.9493g.

It is in reasonably good cosmetic condition but has some marks from use as well as some rust. The top and right doors are missing handles.

This Sartorius CP622 Analytical Top-Loading Laboratory Balance Scales was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a set of calibration weights. It seems relatively accurate against our weights.

20mg = 0.19g

20g = 19.97g

50g = 49.92g

100g = 99.88g

The power adapter is not included. It requires a 14.5V adapter.

It is in reasonably good cosmetic condition. It has two holes on the base where it looks like more adjustable feet could go, though it is perfectly stable with just the one fixed back foot in the middle.

This unit was removed from a public sector lab as surplus to requirements.

The unit is in superb condition, and appears to read our calibration/test weights perfectly (weights not included).

Highest shipping cost is because this would be sent via a mini pallet to avoid damage to the scales in transit. However international buyers please enquire as we can reduce considerably. Also, collection is welcome.

This unit was removed from a lab during a clearout as it was surplus to requirements. As far as we can tell, the unit appears to be new in the box.

Unit will require additional parts such as filters etc to get running.

The box contains:

1 Water Purifier.

2 Kettle leads.

1 Transport Pump.

1 Quality Assurance Certificate.

1 Ultrafilter 611CDU5.

2 spare cables with connections.

1 Purifier Manual.

1 Transport Pump Manual.

1 Certificate Of Conformity.