Miscellaneous Laboratory Equipment
Items 1 to 20 of 531
£ 20,000.00 (ex. VAT) 1 in stock
Protein Technologies Prelude Peptide Synthesis System Lab
ITEM-30855
This Protein Technologies Prelude Peptide Synthesis System is being sold on behalf of a client. It is surplus to requirements.
The unit is in full working order and the software is included. The PC is built in, and controlled by the included monitor & keyboard.
The plastic section of the ducting will be retained by the Lab, the metal section coming directly from the Prelude is included.
It is in very good cosmetic condition with only minor marks from use.
£ 13,850.00 (ex. VAT) 1 in stock
Randox RX Daytona+ Plus Chemistry Analyser Lab
ITEM-20663
Randox RX Daytona+ Plus Chemistry Analyser
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further as we do not have the required software. The lamp inside is in working order.
It is in good cosmetic condition with marks from use.
It is supplied with a selection of plastic containers for waste and wash solution.
£ 13,000.00 (ex. VAT) 1 in stock
THERMO KingFisher FLEX Particle Processor Type 711 96-Well Lab
ITEM-38918
KingFisher FLEX Particle Processor Type 711
This was removed from a working lab where it was surplus to requirements.
The unit powers up and the lab confirmed that it was in full working order prior to removal.
It is in excellent cosmetic condition with minor marks from use.
It has a 96-well head fitted.
£ 11,945.00 (ex. VAT) 1 in stock
Planar NSI Near-Field Measurement System 1.5x1.5meters Scan Area
ITEM-29767
Planar NSI Near-Field Measurement System
This was removed from a university lab where it was surplus to requirements.
The system comes with HP workstation xw4100 PC with installed Antenna Measurement Software NSI2000 version 4.11.202. It also has installed National Instruments - Measurement & Automation Explorer Version 15.3. Hardlock (dongle) included
The system was not used for a few years, the technician who worked with it has retired and it was not used since.
The system is a planar near-field scanner, which measures an aperture of 1.5m x 1.5m. It is designed for high-frequency measurements of antennas. The equipment in the rack, controls the position of the probe and measurements are taken using a network analyser. These analysers are usually supplied by the customer and the one that was used with this system has been removed and is not included.
£ 10,000.00 (ex. VAT) 1 in stock
MicroBetaTriLux Model:-1450 12 Detector 96/384 well Lab
ITEM-26377
This is being sold on behalf of a client. It is surplus to requirements.
The MicroBeta TriLux is an instrument designed for liquid scintillation or luminescence detection of samples in microplates, tubes or on filters. This system has 12 detectors and is set up for 96/384 well plates and a 16-shelf plate-loading magazine
It has been refurbished by Factory trained Engineers to the original instrument specification.
Included with it are;
3 months UK Warranty
12 Detectors
USB upgrade
Windows 10 upgrade.
PC Monitor
£ 10,000.00 (ex. VAT) 1 in stock
Leco AMA254 Mercury Analyzer with Software & Accessories Lab
ITEM-25181
This Leco AMA254 Mercury Analyzer was removed from a university lab where it was surplus to requirements.
The unit powers on and is in reasonably good cosmetic condition but there is some surface rust visible on some of the components inside the unit. The glass window has been previously damaged, but has been repaired to a good standard.
The Quicksilver software has been loaded onto a PC and communicates with the instrument.
Included with it are;
Manuals:
1x AMA254 Advanced Mercury Analyzer Operating manual
Windows version 5.03
1x LECO AMA254 Advanced Mercury Analyzer Instruction manual
Software Version 4.0X
1X ALTEC Quality Control Report on AMA254
The unit is in good cosmetic condition it is not clear if any bits of the report are missing.
CDs:
1x LECO AMA254 Mercury Analyzer
Version 4.04
Part No. 159-136-404
1x AMA254 (CD copy)
Version 5.0.3-3
Ser No. 216051145
3x LECO Coal Reference Material
contents weight 50g
Part Nos.
502-685
Sulfur % 1.16 ± 0.05
ppm Mercury 0.040 ± 0.008
502-686
Sulfur % 4.16 ± 0.14
ppm Mercury 0.065 ± 0.017
502-687
Sulfur % 2.06 ± 0.07
ppm Mercury 0.130 ± 0.011
£ 9,740.00 (ex. VAT) 1 in stock
Bioquell H202 Decontamination System Z-2 & R-10 Lab
ITEM-36942
Bioquell H202 Decontamination System Z-2 & R-10
This was removed from a university lab where it was surplus to requirements.
The lab confirmed they were fully working prior to removal.
Included are the following;
Bioquell Z-2
Model no. TD068-0000-230V
SN - 201104BZ21160
(5L Container inside is empty)
Hours run - 59
A warning for calibration due came up, was due 14/07/23
Bioquell R-10
Model no. TD060-5900-230V
SN - 201106BR1253
Both units power on and are in good used cosmetic condition.
£ 9,250.00 (ex. VAT) 1 in stock
Edwards E480 Vacuum Thermal Evaporator Coating System Lab
ITEM-29696
This Edwards E480 Vacuum Thermal Evaporator Coating System was removed from a university lab where it was surplus to requirements.
The client confirmed that it was in working order prior to removal but requires a diff pump and a rotary pump.
It has not been tested at our facility.
It is in good cosmetic condition with marks from use.
£ POA 1 in stock
Perkin Elmer Operetta High Content Screening System
ITEM-35158
This item is new in stock. Please enquire for further details.
£ 8,730.00 (ex. VAT) 1 in stock
Interscience Spiral easySpiral Pro Automatic Spiral Plater Lab
ITEM-36900
Interscience Spiral easySpiral Pro Automatic Spiral Plater
This was removed from a university lab where it was surplus to requirements.
The item powers on and appears to run through test sequences.
The item is in a reasonable, used cosmetic condition with marks from use.
£ 8,725.00 (ex. VAT) 1 in stock
CSP IT-10 Infinity Turbine Organic Rankine Cycler
ITEM-36912
CSP IT-10 Infinity Turbine Organic Rankine Cycler
This was removed from a university lab where it was surplus to requirements.
Model - IT-10
SN - IT10-0025
The item is in a reasonable, used cosmetic condition but is unable to be tested.
£ POA 1 in stock
Pope Scientific 3 Litre Stainless Nutsche Filter Dryer Powered, Water Jacketed
ITEM-38318
This item is new in stock. Please enquire for further details.
£ 7,000.00 (ex. VAT) 1 in stock
Q-Panel QUV QUV/se Accelerated Weathering Tester Lab
ITEM-36824
QUV QUV/se Accelerated Weathering Tester
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has run a successful cycle. The lamps work and the blowers run.
It is in good cosmetic condition with minor marks.
£ 6,715.00 (ex. VAT) 1 in stock
Advanced Analytical Fragment Analyzer Automated CE System Lab
ITEM-31907
Advanced Analytical Fragment Analyzer Automated CE System
This was removed from a university lab where it was surplus to requirements.
The unit powers up but was supplied without software so we have been unable to test it further.
It is in good cosmetic condition with minor marks from use.
£ 6,465.00 (ex. VAT) 1 in stock
Edwards E306A Thermal Evaporator Coating System Lab
ITEM-29823
This Edwards E306A Thermal Evaporator Coating System was removed from a university lab where it was surplus to requirements.
The system powers up but we were unable to test it further at our facility.
It is made up of the following modules;
1 x Edwards No.8 High Vacuum Pump Model E2M8.
1 x Edwards PR10-K.
1 x Edwards Vacuum Switch Type VSK 1.B.
1 x Edwards Vapour Pump Model EO4.
It is in good cosmetic condition but has marks from use.
No key supplied with the Item for the bottom panels.
£ 4,810.00 (ex. VAT) 1 in stock
Carl Zeiss MCS 500 System & Multiplexer Lab
ITEM-39717
Carl Zeiss MCS 500 System & Multiplexer
These units were removed from a university lab where they were surplus to requirements.
Everything powers up and the lab confirmed it was in working order when last used.
Included are;
Carl Zeiss MCS 500 System Spektrometer BLX500-4 + MCS 522 UV-VIS
Model: MCS 500
Serial#: 028989
Carl Zeiss Multiplexer
Model: Multiplexer
Serial#: 021166
Carl Zeiss Enclosure
Model: Double Ch.Syst.
Serial#: 029050
RS-LINK 1.2
Serial#: 1806-1009
PSM-V24/FO-G/S (Qty. 2)
£ 4,525.00 (ex. VAT) 1 in stock
Mechline Waste 2-O Food Waste Digester Model - W20.180
ITEM-37038
This was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order.
It is in reasonable cosmetic condition with marks from the sort of use you would expect a used machine like this to have.
Model - W20.180
SN - W201802221D
£ 3,720.00 (ex. VAT) 1 in stock
Foss 2050 Soxtex Avanti Extrac Unit with Control & Drive Units Lab
ITEM-35323
Foss 2050 Soxtex Avanti Extrac Unit with Control & Drive Units
This was removed from a university lab where it was surplus to requirements.
The system powers up but has not been tested further. All the units are in good cosmetic condition with marks from use.
Included are;
1 x 2050 Soxtec Avanti Extract Unit Part No. 10007330.
1 x 2050 Soxtec Avanti Control Unit Part No. 10007334.
1 x 2050 Soxtec Avanti Drive Unit Part No. 10007338.
£ 3,520.00 (ex. VAT) 1 in stock
Engis 15 Precision Lapping Machine System with Accessories Lab
ITEM-34823
Engis 15 Precision Lapping Machine System with Accessories
This was removed from a university lab where it was surplus to requirements.
Items are in reasonable cosmetic condition, showing some signs of use.
The items powered on without issue - all the functions are working as intended.
2x Hyprez liquid Diamond Electronic Dispenser
S/N: AJ1245-884
S/N: AJ1245-496
4x Lapping plates
3x Liquid diamond dispensing jars
1x Holding frame for Liquid diamond dispensing jars
1x Impregnated abrasive lapping disc
3x Lapping weights
3x Conditioning rings
6x Work rings, ceramic backed
2x holding jigs
12x Lapping keys
3x Aluminium plates
1x Holding bracket
1x Aluminium circular plate
£ 3,510.00 (ex. VAT) 1 in stock
Engis 15 Precision Lapping Machine with Hyprez Dispenser & Accessories
ITEM-34824
This Engis 15 Precision Lapping Machine was removed from a university lab where it was surplus to requirements.
Items are in reasonable cosmetic condition, showing some signs of use.
The items powered on without issue - all the functions are working as intended.
1x Hyprez liquid Diamond Electronic Dispenser
S/N: AJ1245-761
3x Lapping plates
3x Liquid diamond dispensing jars
1x Holding frame for Liquid diamond dispensing jars
2x Impregnated abrasive lapping disc
3x Lapping weights
3x Conditioning rings
6x Work rings, ceramic backed
2x Aluminium holding jigs
5x Aluminium plates
3x Circular aluminium plates
1x Hexagonal threaded aluminium plate
1x Brass lapping plate
1x Holding bracket
Items 1 to 20 of 531