Commercial, IT and Miscellaneous
Items 1 to 20 of 97
£ 4,495.00 (ex. VAT) 1 in stock
Sprintex Callis Therapy Treadmill Running Machine
ITEM-35097
Sprintex Callis Therapy Treadmill Running Machine
This was removed from a university lab where it was surplus to requirements.
The unit is in good working order, and good cosmetic condition with minor marks. It runs up to a speed of 18.7km/h.
£ 3,885.00 (ex. VAT) 1 in stock
Set of Newco Commercial Catering Carvery Hot Food Servery Counters
ITEM-40091
Set of Newco Commercial Catering Carvery Hot Food Servery Counters
This is being sold on behalf of a catering department.
Included are;
3 x large hot carvery units
3 x large chilled units
2 x carvery stations
The units are in good cosmetic condition with marks from use.
Collection only from Loughborough.
Length of the 3 joined together hot plate - 6ft 10in
Height - 4ft 10 inch
Width - 3ft 2 inch
X1 stand alone chiller unit:
L – 10ft 6 inch
H -4ft 10 in
W -3ft 2
Chiller 2
L -8ft 6 in
W -3FT 2in
H -4FT 8 inch
Chiller 3,4
L -4FT 11in
W -3FT 2in
H -4FT 8 inch
£ 2,720.00 (ex. VAT) 1 in stock
Seward Rondo Pastry Brake - Dough Sheeter Type KDWn 094
ITEM-38411
Seward Rondo Pastry Brake - Dough Sheeter
This was removed from a commercial kitchen where it was surplus to requirements.
The two pastry belts have heavy signs of wear and use
This pastry brake has been tested and all functions are working although the pastry belts are heavily worn.
Roller height lever to control thickness of pastry, between 0.5 cm and 25cm
Aluminium flour tray 48cm x 12cm x 7cm
Work height 90cm
Retractable wooden extension shelf, 60cm x 40cm
Working width 90cm, length with shelf extended 275cm, height 115cm
Storage compartment under belt area 88cm x 65cm x 65cm
£ 1,885.00 (ex. VAT) 1 in stock
Blueprinter M3 Industrial Selective Laser Sintering (SLS) Low Noise 3D Printer
ITEM-29641
This Blueprinter M3 Industrial Selective Laser Sintering (SLS) Low Noise 3D Printer was removed from a university lab where it was surplus to requirements.
The unit is in excellent cosmetic condition with little to no marks from use.
The lab reported that the unit cost around 60K when new. The item is in working condition. The manufacturer has gone into Administration so unable to offer further support for the printer.
Build Volume: 200mm x 157mm x 150mm.
£ 1,500.00 (ex. VAT) 1 in stock
Marrutt Laboratory Darkroom Two Way Revolving Rotary Door Lab
ITEM-38742
Marrutt Laboratory Darkroom Two Way Revolving Rotary Door
This was removed from a university lab where it was surplus to requirements.
The door is a bit stiff to operate but is in good working order. It is in good cosmetic condition with marks from use.
Inside Dimensions: Wx85cm Dx85cm Hx200cm.
Also included are two rubber non slip mats for entry and exit of the Darkroom Door.
£ 1,350.00 (ex. VAT) 1 in stock
DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector
ITEM-25509
This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.
The unit powers up and the lamp is working but we were unable to test it with any of our equipment due to the connectors not matching.
There are a number of cables fitted to an Inline 3252HR RGBHV Distribution Amplifier/Line Driver.
Lens - Christie Digital Systems Fixed XGA/SXGA 1.2:1 Minolta
The remote control was tested and is in working order.
£ 1,070.00 (ex. VAT) 1 in stock
DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector
ITEM-25512
This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.
The unit powers up and the lamp is working but we were unable to connect it to any of our equipment to test it further. It comes with cables and a remote control which is fully working.
Lens - Christie Digital Systems zoom XGA/SXGA 2.2-4.0:1 Minolta
£ 1,010.00 (ex. VAT) 1 in stock
Stratasys Dimension Elite 3D Printer PN - 180-00105 & Accessories
ITEM-31388
This Stratasys Dimension Elite 3D Printer was removed from a university lab where it was surplus to requirements.
The item powers on and runs through calibration upon start up. We were unable to test it further at our facility but we contacted the lab and they said the following;
0.1mm tolerance on prints, some post-print cleaning is necessary. It can be a bit temperamental. The heat heads require cleaning each time the printer is used. it could do with a complete service and replacement heads.
The item is in a good, used cosmetic condition aside from a small scratch on the back.
With it are;
Cartridges (all boxes have remaining percentages written on them) :-
1 x ABS-P430 Model (Olive Green) 4%
1 x Nectarine 4%
2 x Nectarine 10%
1 x White 3%
1 x Yellow 12%
1 x Yellow 98%
1 x Blue 3%
1 x Black 14%
1 x Black 6%
1 x Red (unmarked)
Also included:-
2 x Boxes containing 50 Modelling Bases (PN-340-00200)
2 x Dimension System Software Discs
2 x Spare Bulbs
Tool kit
Wire brush
Anti-Sieze Lubricant
2 x Keys
Ethernet Cable
IEC Lead
5 x Spare Fans
Unit dimensions - L92 W69 H172cm
Storage Compartment - L75.5 W65 H45.5cm
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Thermoplan Black & White 3 CTM-RF Fully Automatic Coffee Machine Spares/Repairs
ITEM-36515
Thermoplan Black & White 3 CTM-RF Fully Automatic Coffee Machine Spares/Repairs
This was removed from a university pub where it was surplus to requirements.
The unit powers up but we were unable to test it further. The grounds drawer is missing.
The university confirmed that it may have some issues, and it has some superficial damage, but it could be refurbished.
It is sold for spares/repairs as we are fairly sure it will have issues.
£ 875.00 (ex. VAT) 1 in stock
4 x Mobili Office White Table Tops - 120 x 80 x 3cm & 100 x 80 x 3cm
ITEM-36980
4 x Mobili Office White Table Tops - 120 x 80 x 3cm & 100 x 80 x 3cm
These were removed from a working lab where they were surplus to requirements.
3 Sized - 120 x 80 x 3cm
1 Sized - 100 x 80 x 3cm (missing one of the cable hole covers)
Comes with 12 x Metal Parts (they aren't legs, some sort of support brackets/ beams) - 3 per table top.
They are not supplied with legs.
£ 795.00 (ex. VAT) 1 in stock
Projet 460 Plus 3D Advanced Printer
ITEM-35306
This Projet 460 Plus 3D Advanced Printer was removed from a university lab where it was surplus to requirements.
The unit powers up and runs through the boot sequence without fault.
It is in good cosmetic condition with minor marks from use.
Internal dimensions are: L111cm x W45cm x H46cm.
£ 740.00 (ex. VAT) 1 in stock
Viglen Genie P3 65O PC with BOMEM Software
ITEM-28402
This PC was removed from a BOMEM DA3 Series Spectrophotometer System
Viglen PC w/ Galatic Protection Plug
Genie P3 65O
OS: Windows 95
The PC powers on and is in good cosmetic condition.
There are some surface marks from general use.
The PC automatically logs in.
There is a slight rattling noise coming from the fan.
The bearings may have gone due to the age of the PC. This does not seem to affect the operation and we have deemed that a repair is not required.
Software:
Bomem Grams_32
Version 4.04
Bomem DA Series Acquisition Program
Version 1.4
May 19, 2000
Galatic Protection Plug:
Type Y
25 Pin
£ 700.00 (ex. VAT) 1 in stock
Pitco 35C+ 16 Ltr Tube Fired Gas Commercial Deep Fat Fryer
ITEM-38890
Pitco 35C+ 16 Ltr Tube Fired Gas Commercial Deep Fat Fryer
This was removed from a university catering department. It was surplus to requirements.
The unit has not been tested as we do not have a gas supply at our facility.
It is in reasonably poor cosmetic condition and is in need of a deep clean, and some maintenance.
£ 660.00 (ex. VAT) 1 in stock
Torrents T54 Dual Bread Slicer
ITEM-38405
Torrents T54 Dual Bread Slicer
This was removed from a commercial kitchen where it was surplus to requirements.
The unit powers up and is in working order.
It is in good cosmetic condition with marks from use.
£ 525.00 (ex. VAT) 1 in stock
Kramer 16X16 RGBHV & Audio Matrix Model VP-1616
ITEM-24762
Kramer 16X16 RGBHV & Audio Matrix Model VP-1616
This was removed from a university where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. The Faceplate of the unit can come off via 2x quick-release screws. One of the quick-release screws has snapped on the RHS of the unit leaving the faceplate wobbly.
The fans are working but it has not been tested further.
£ 500.00 (ex. VAT) 1 in stock
Xerox Phaser 7400 Laser Printer With Ink Cartridges
ITEM-35876
Xerox Phaser 7400 Laser Printer With Ink Cartridges
This was removed from a university lab where it was surplus to requirements.
It powers up and is in good working order.
Includes 4 x ink cartridges:
-1 x Cyan (Imaging unit 108R00647)
-1 x Magenta (Imaging unit 108R00648)
-1 x Yellow (Imaging unit 108R00649)
-1 x Black (Imaging unit 108R00650)
Max prints per minute- 40
Model number- N31201B
Serial number- WNC757283
£ 500.00 (ex. VAT) 1 in stock
Job lot of IT & AV Equipment - Projectors, Monitors & Media Players
ITEM-38615
This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.
None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.
This Bundle includes the following :
Audio Speakers :
1 X JVC Stereo
1 X Bush Signature Portable Radio/CD Player
1 X Grundig Dynamic Sound System
1 X Labtec MultiMedia Speaker
1 X Orbit Soundbar
1 X Tascam DA-P1 Audio Tape Recorder
Cameras :
1 X Sony Cyber-Shot
1 X FinePix S7000
1 X FinePix S3500
1 X Sony HandyCam
1 X Samsung Digital Camcorder
1 X Samsung HyperDis
2 X Video Com - 3374
Projectors :
3 X Sharp XR-30X
2 X 3M-1720
1 X Saville Proslide Solo
1 X Saville Projector with case
1 X Sony XGA VPL-CX61
2 X ELMO Omnigraph
1 X Hanimex Syllabus
1 X Panasonic F200NT XGA
1 X Excelvan Mini Led
Monitors :
1 X HP Compaq LA1751G
1 X LG Flatron L1910S
1 X LG Flatron W22345
1 X EDGE 10
1 X JVC TM-A1016 Color Monitor
Stereo/DVD Players :
1 X Sony Mini Disc 480
1 X Sony Mini Disc 470
1 X Daewoo DC Hi-Fi Stereo
1 X Samsung Hi-Fi Stereo Pal
1 X Toshiba DVD/Cassette Recorder DVR20
Miscellaneous :
2 X Neet HDMI Extender
3 X Startech 4K DisplayPort Cables
1 X Port USB to Serial RS232 Adapter Cables
1 X D Digidesign Mini Box 2
4 X Neutrik BNC Bayonet Plugs
2 X Floppy Disc Readers
1 X Wireless AV Link
1 X HD media Player
1 X HD Video Processing
1 X Canon Microphone Adapter MA300
1 X Australian Monitor Dual Phantom Power Supply
1 X AJA KL Box
1 X Cosmed SAL K46² Telemetry Unit
1 X TP Link 5 Part GB Desktop Switch
1 X Rotel Stereo Tuner RT-850AI
1 X Inter M PA-4000 Amplifier
3 X Xbox 360 Kinect
7 X DELL PR01X Docking Station
4 X DELL PR01X Docking Station Stand
7 X Microsoft Natural Ergonomic Keyboard 7000
4 X Mixed Keyboards
£ 500.00 (ex. VAT) 1 in stock
Set of IFF Advanced Stage Rigging Equipment Pantograph TOP 2C
ITEM-25506
These were removed from a university where they were surplus to requirements.
Included are;
4 x TOP 2C
6 x Smaller parts
The units are in reasonably good cosmetic condition but have been used.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Stratasys Dimension SST 768 Commercial 3D Printer - Spares/Repairs
ITEM-36514
Stratasys Dimension SST 768 Commercial 3D Printer
This was removed from a university lab where it was surplus to requirements.
The unit fails PAT testing on insulation and also tripped testing room fuse board when plugged in.
It is in reasonable cosmetic condition but has cracks and marks from use, including damage to the window.
It is sold for spares/repairs.
£ 480.00 (ex. VAT) 1 in stock
6 x Calumet Genesis 300B Portable Studio Photography Lights Flash Heads
ITEM-21211
6 x Calumet Genesis 300B Portable Studio Photography Lights
These were removed from a university where they were surplus to requirements.
We have tested all of the lamps and all are working correctly. Four of the lamps have bulbs and two are missing.
The lamps are all in very good condition with minor age and usage marks. All come with shades.
The lamp's dimensions are 33cm (L)x 20cm (W)x 20cm (H). This includes the bracket. Each unit is approximately 2kg in weight.
Also included is a manual.
Items 1 to 20 of 97