This Blueprinter M3 Industrial Selective Laser Sintering (SLS) Low Noise 3D Printer was removed from a university lab where it was surplus to requirements.

The unit is in excellent cosmetic condition with little to no marks from use.

The lab reported that the unit cost around 60K when new. The item is in working condition. The manufacturer has gone into Administration so unable to offer further support for the printer.

Build Volume: 200mm x 157mm x 150mm.

Marrutt Laboratory Darkroom Two Way Revolving Rotary Door

This was removed from a university lab where it was surplus to requirements.

The door is a bit stiff to operate but is in good working order. It is in good cosmetic condition with marks from use.

Inside Dimensions: Wx85cm Dx85cm Hx200cm.

Also included are two rubber non slip mats for entry and exit of the Darkroom Door.

This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.

The unit powers up and the lamp is working but we were unable to test it with any of our equipment due to the connectors not matching.

There are a number of cables fitted to an Inline 3252HR RGBHV Distribution Amplifier/Line Driver.

Lens - Christie Digital Systems Fixed XGA/SXGA 1.2:1 Minolta

The remote control was tested and is in working order.

This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.

The unit powers up and the lamp is working but we were unable to connect it to any of our equipment to test it further. It comes with cables and a remote control which is fully working.

Lens - Christie Digital Systems zoom XGA/SXGA 2.2-4.0:1 Minolta

This Stratasys Dimension Elite 3D Printer was removed from a university lab where it was surplus to requirements.

The item powers on and runs through calibration upon start up. We were unable to test it further at our facility but we contacted the lab and they said the following;

0.1mm tolerance on prints, some post-print cleaning is necessary. It can be a bit temperamental. The heat heads require cleaning each time the printer is used. it could do with a complete service and replacement heads.

The item is in a good, used cosmetic condition aside from a small scratch on the back.

With it are;

Cartridges (all boxes have remaining percentages written on them) :-

1 x ABS-P430 Model (Olive Green) 4%

1 x Nectarine 4%

2 x Nectarine 10%

1 x White 3%

1 x Yellow 12%

1 x Yellow 98%

1 x Blue 3%

1 x Black 14%

1 x Black 6%

1 x Red (unmarked)

Also included:-

2 x Boxes containing 50 Modelling Bases (PN-340-00200)

2 x Dimension System Software Discs

2 x Spare Bulbs

Tool kit

Wire brush

Anti-Sieze Lubricant

2 x Keys

Ethernet Cable

IEC Lead

5 x Spare Fans

Unit dimensions - L92 W69 H172cm

Storage Compartment - L75.5 W65 H45.5cm

This Projet 460 Plus 3D Advanced Printer was removed from a university lab where it was surplus to requirements.

The unit powers up and runs through the boot sequence without fault.

It is in good cosmetic condition with minor marks from use.

Internal dimensions are: L111cm x W45cm x H46cm.

This PC was removed from a BOMEM DA3 Series Spectrophotometer System

Viglen PC w/ Galatic Protection Plug

Genie P3 65O

OS: Windows 95

The PC powers on and is in good cosmetic condition.

There are some surface marks from general use.

The PC automatically logs in.

There is a slight rattling noise coming from the fan.

The bearings may have gone due to the age of the PC. This does not seem to affect the operation and we have deemed that a repair is not required.

Software:

Bomem Grams_32

Version 4.04

Bomem DA Series Acquisition Program

Version 1.4

May 19, 2000

Galatic Protection Plug:

Type Y

25 Pin

Kramer 16X16 RGBHV & Audio Matrix Model VP-1616

This was removed from a university where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. The Faceplate of the unit can come off via 2x quick-release screws. One of the quick-release screws has snapped on the RHS of the unit leaving the faceplate wobbly.

The fans are working but it has not been tested further.

Xerox Phaser 7400 Laser Printer With Ink Cartridges

This was removed from a university lab where it was surplus to requirements.

It powers up and is in good working order.

Includes 4 x ink cartridges:

-1 x Cyan (Imaging unit 108R00647)

-1 x Magenta (Imaging unit 108R00648)

-1 x Yellow (Imaging unit 108R00649)

-1 x Black (Imaging unit 108R00650)

Max prints per minute- 40

Model number- N31201B

Serial number- WNC757283

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

This Bundle includes the following :

Audio Speakers :

1 X JVC Stereo

1 X Bush Signature Portable Radio/CD Player

1 X Grundig Dynamic Sound System

1 X Labtec MultiMedia Speaker

1 X Orbit Soundbar

1 X Tascam DA-P1 Audio Tape Recorder

Cameras :

1 X Sony Cyber-Shot

1 X FinePix S7000

1 X FinePix S3500

1 X Sony HandyCam

1 X Samsung Digital Camcorder

1 X Samsung HyperDis

2 X Video Com - 3374

Projectors :

3 X Sharp XR-30X

2 X 3M-1720

1 X Saville Proslide Solo

1 X Saville Projector with case

1 X Sony XGA VPL-CX61

2 X ELMO Omnigraph

1 X Hanimex Syllabus

1 X Panasonic F200NT XGA

1 X Excelvan Mini Led

Monitors :

1 X HP Compaq LA1751G

1 X LG Flatron L1910S

1 X LG Flatron W22345

1 X EDGE 10

1 X JVC TM-A1016 Color Monitor

Stereo/DVD Players :

1 X Sony Mini Disc 480

1 X Sony Mini Disc 470

1 X Daewoo DC Hi-Fi Stereo

1 X Samsung Hi-Fi Stereo Pal

1 X Toshiba DVD/Cassette Recorder DVR20

Miscellaneous :

2 X Neet HDMI Extender

3 X Startech 4K DisplayPort Cables

1 X Port USB to Serial RS232 Adapter Cables

1 X D Digidesign Mini Box 2

4 X Neutrik BNC Bayonet Plugs 

2 X Floppy Disc Readers 

1 X Wireless AV Link

1 X HD media Player

1 X HD Video Processing

1 X Canon Microphone Adapter MA300

1 X Australian Monitor Dual Phantom Power Supply

1 X AJA KL Box

1 X Cosmed SAL K46² Telemetry Unit

1 X TP Link 5 Part GB Desktop Switch

1 X Rotel Stereo Tuner RT-850AI

1 X Inter M PA-4000 Amplifier

3 X Xbox 360 Kinect

7 X DELL PR01X Docking Station

4 X DELL PR01X Docking Station Stand

7 X Microsoft Natural Ergonomic Keyboard 7000

4 X Mixed Keyboards

These were removed from a university where they were surplus to requirements.

Included are;

4 x TOP 2C

6 x Smaller parts

The units are in reasonably good cosmetic condition but have been used.

6 x Calumet Genesis 300B Portable Studio Photography Lights

These were removed from a university where they were surplus to requirements.

We have tested all of the lamps and all are working correctly. Four of the lamps have bulbs and two are missing.

The lamps are all in very good condition with minor age and usage marks. All come with shades.

The lamp's dimensions are 33cm (L)x 20cm (W)x 20cm (H). This includes the bracket. Each unit is approximately 2kg in weight.

Also included is a manual.

Asus Desktop PC with TSI: 'Aerosol Instrument Manager' Software Lab

This was removed from a university lab where it was surplus to requirements.

It contains the following software;

Microsoft Office XP Professional

Ver 10.0.6626.0

Pylab

Enthought Python Distribution

Ver 2.5.2001

AFPL Ghostscript ver 8.45



Picolog

Pico Technology Software

Ver 5.17.1

MiKTeX

ver 2.4

TSI

Aerosol Instrument Manager Software

Ver 5.2.0

TEI 2.2.0

Thermo Environmental Instruments

Ver 5.1.2600.5512

10 x Calumet Genesis 200 200ws Monoloight Photo Studio Strobe Photography Lights

These were removed from a university where they were surplus to requirements.

We have tested all of the lamps and all are working correctly. Seven of the lamps have bulbs and three are missing.

The lamps are all in very good condition with minor age and usage marks. All come with shades, and there are four extra.

The lamp's dimensions are 33cm (L)x 20cm (W)x 20cm (H). This includes the bracket. Each unit is approximately 2kg in weight.

Also included is a manual.

21 x CED 1902 MKIII Isolated Pre-Amplifiers

These were removed from a university lab where they were surplus to requirements.

None of the units have been tested but are all in reasonably good cosmetic condition with some marks from use.

This Job lot of 12 Dexel Lighting Fluo Soft Studio Stage Lights was removed from a university where it was surplus to requirements.

Included are;

10 x Fluo Soft Studio LFS-2 (5 without bulbs)

2 x Fluo Soft Studio LFS-4 (1 without bulbs)

We were unable to test them at our facility due to the type of plug.

There is a mix of conditions, and also a number of spare hoods, corner mirrors etc.

This Tanberg Edge 95 Video Conferencing System was removed from a university where it was surplus to requirements.

The system includes;

Tandberg TTC7-14

Tandberg TTC8-01 Camera (SN-20A80125) Powers on

Tandberg TRC 4 Remote (requires 4 x AAA Batteries)

Audio Technica Microphone

PC Cable

Ethernet Cable

PSU (TTC7)

12vdc Power Supply (Camera)

The item is in a reasonable, used cosmetic condition but the camera is a bit sticky from the age of the rubber components.