Engineering
Items 1 to 20 of 212
£ 34,940.00 (ex. VAT) 1 in stock
International Metrology Systems MS Impact Coordinate Measuring Machine Lab
ITEM-23978
International Metrology Systems MS Impact Coordinate Measuring Machine
This was removed from a university lab where it was surplus to requirements.
We were unable to test it at our facility but the lab confirmed that it was working prior to removal.
It has a Renishaw Probe Head Controller PHC10-2 and Virtual-DMIS Version 3.2 and Version 4.0 software discs which run it.
£ 30,000.00 (ex. VAT) 1 in stock
Knapp Open Shuttle OS100B Flexible Autotomous Robotic Warehouse Shuttle
ITEM-31707
This Knapp Open Shuttle OS100B Flexible Autotomous Robotic Warehouse Shuttle is being sold on behalf of a client. It is surplus to requirements.
The unit is in excellent cosmetic condition and has only seen <50h of use.
Technical information about the Knapp Open Shuttle OS100B:
- Speed: Up to 1.6 m/s (safe)
- Max. Acceleration: 1,0m/s²
- Minimum turn radius: 360° turn at standstill
- Delivery: both front and rear possible
- Container dimensions: Up to 800 mm x 600 mm
- Optional integrated lift (550 mm to 1,500 mm)
- Maximum load: 100 kg
- Battery life: Over 6 hours, continuous operation
- Charging time: Approximately 60 minutes (charge ratio > 1:6)
- Conveyor top edge: 500 mm to 1,000 mm
- Protection class: IP20
- Battery: LiFePo4 (lithium iron phosphate)
- Communication method: WLAN (b/g/n standard) in 5GHz range
- Dead weight: 130kg
Collection only from Hanau, Germany.
£ 9,000.00 (ex. VAT) 1 in stock
Chroma 8 Channel Battery Cell Programmable Charge / Discharge Tester 17208M Lab
ITEM-18222
This Chroma 8 Channel Battery Cell Programmable Charge/Discharge Tester Model 17208M is being sold on behalf of a client. It is surplus to requirements. It is not currently at our site, but viewings can be arranged.
The unit is in good cosmetic condition and has been stored in the original box for the last year. It was working before it was put into storage.
Some info on the unit;
Chroma’s 17208M is a standalone 8 channel version of their 17011 series high precision charge/discharge tester specifically designed for Lithium-ion batteries, electrical double layer capacitors (EDLC), and lithium-ion capacitors (LIC).
The 17208M comes as a fully integrated system which includes allowing full configuration with reporting and statistics capability.
The new Chroma 17208M-6-30 is a high accuracy (±0.02% of F.S.) programmable charge and discharge tester (6V/30A 8 channels) built with 4 current ranges. It is the best test solution for energy storage products such as battery cells, super capacitors, and lithium ion capacitors.
£ 8,890.00 (ex. VAT) 1 in stock
Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400
ITEM-37041
Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been connected to the pump. It is in good working order.
It is in reasonable cosmetic condition with the expected kinds of marks from use for a piece of equipment like this.
Model Type - 95.C/800.400
SN - 495.MSC.1956
Metaserv Spindle Speed 3600 rpm
Disc size - 250 x 1.5 x 32mm
Disc Size: 250mm
Arbor Size: 32mm
Wheel RPM: 2830 RPM
Vice cutting capacity: 80mm - 75mm diameter
Safety features: Emergency stop, safety switch, electronic break
Coolant connection size: 12.5mm
Drain size: 32MM ID 34MM OD
Coolant tank size: 23 Litre
Power: 3 PHASE - No neutral
Dimensions: : 800 x 550 x 450 mm
Tank Container dimensions - L50 W36 H29cm
The lid with the pump doesn't fit the tank.
£ 5,375.00 (ex. VAT) 1 in stock
Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel Lab
ITEM-23928
Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel
This was removed from a university engineering department where it was surplus to requirements.
The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling.
It is in five sections:
Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor.
Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters.
Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm.
Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal.
Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.
£ 4,735.00 (ex. VAT) 1 in stock
Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller Lab
ITEM-35544
Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller
This was removed from a university lab where it was surplus to requirements.
Everything powers up but has not been tested further.
The PC contains quite a lot of software.
The programs that are relevant to the system are:
MicroWriter ML Version 2.11.11.0.
Thorlabs apt configuration utility v2.2.5389 14611.
MicroWriter ML will not start up properly as the hardware is not connected. This is not a fault, we just don't have the rest of the system
The Newport Motion Controller/Driver Model XPS control unit is for a table that the microwriter would sit on.
£ 4,465.00 (ex. VAT) 1 in stock
TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab
ITEM-36247
TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab
This was removed from a university lab where it was surplus to requirements.
The cabinet contains the following items.
Aerotech A3200 Ndrive CP x 5
Serial#1:577057/7
Serial#2:577057/6
Serial#3:681834/7
Serial#4:681834/8
Serial#5:681834/2
All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet.
National Instruments Signal Conditioning Connector Block x 2
Model: SC-2345
Both have stickers on the front of the items
Sicker on item 1: pH Sensor
Sticker on item 2: Thermocouples Inlet/Outlet Drive Relays
There are other small electrical switches and controllers inside.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 4,235.00 (ex. VAT) 1 in stock
Heidelberg DWL 200 Laser Lithography Pattern Generator System Faulty
ITEM-23967
This Heidelberg DWL 200 Laser Lithography Pattern Generator System was removed from a university engineering department where it was surplus to requirements.
We have not carried out any testing of the system.
We were informed that the system does have a fault where it cannot write but it was used around 3-4 years ago, but not for writing or imaging. It can do structural analysis and capture images.
The system does have a vacuum pump in good working order. There is also an operation manual with it.
The unit is in very good cosmetic condition but has to be sold for spares/repairs due to the faults.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 3,775.00 (ex. VAT) 1 in stock
Schaffner Fast Transient Burst Generator NSG 3025 & CD 126 Coupling Clamp Faulty
ITEM-21124
Schaffner Fast Transient Burst Generator NSG 3025 & CD 126 Coupling Clamp
These were removed from a university where they were surplus to requirements.
The units are in good cosmetic condition with minor marks from use.
Schaffner Fast Transient Burst Generator NSG 3025 powers up but the screen was dark and blinking. We could also hear a clicking noise from inside. It was not tested further.
The Schaffner CD 126 Coupling Clamp was not tested.
The system is sold for spares/repairs.
£ 3,720.00 (ex. VAT) 1 in stock
Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules Lab
ITEM-28395
This Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules was removed from a university lab where it was surplus to requirements.
The unit powers up and is in reasonably good cosmetic condition. It is missing one of its feet.
£ 3,270.00 (ex. VAT) 1 in stock
Able Engineering Oil Blending Vessel System with Armaturen ARI DP32 Valve
ITEM-38693
Able Engineering Oil Blending Vessel System with Armaturen ARI DP32 Valve
This was removed from a university lab where it was surplus to requirements.
It is in a good clean used condition.
Item is supplied with:
1 x Armaturen ARI DP32 Valve.
1 x Lightnin Model: ECI-M51- 150. Serial No. 2747863.
1 x Pump TEC Electric Motor Model: MS2100l-6. Serial No. 1107-004 1949.
1 x Alfa Laval Model: Unique SSV PN10. Serial No. 21127802513. Year 2011.
1 x Flux F424 Seal-less Barrel Pump.
Various ARI Valves & assorted Pipework.
It has not been tested in any way by us.
Serial No: LUB13074-7.
Build date: 2012.
Volume: 360 Ltr.
Construction Category: G.E.P. Tested March 2012.
Material: 304 Stainless steel.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 3,195.00 (ex. VAT) 1 in stock
85 x TTI TG550 5MHz Advanced Analog Function/Sweep Generators Lab
ITEM-34644
85 x TTI TG550 5MHz Advanced Analog Function/Sweep Generators
This job lot of items comes from a university lab, The items were no longer required.
None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.
The units have not been tested at all.
£ 3,120.00 (ex. VAT) 1 in stock
Genuine General Electric CF6-6 Jet Engine From DC10 Aircraft
ITEM-12357
This jet engine is being sold on behalf of a leading UK universities engineering and aerospace department.
The engine which would have originally cost around 1 million USD was owned by MyTravel Aircraft Engineering. It was designed for the DC10 aircraft.
In 2004, the engine type was retired as MyTravel retired the DC10 and moved to the Airbus Aircraft.
Rather than disposing of the engine, it was moved to this universities engineering department as a training resource for students.
This is a genuine full size jet engine.
Its an extremely rare opportunity to acquire a unit like this.
General Electric Model: CF6-6D1A Jet Engine
Removed from retired DC10-10 Aircraft
Has flown about 40 million miles in its 20-year working life.
Please note - whilst the engine was operational prior to going into storage, it is no longer in service and we can offer no warranties to its current performance. It is initially intended for sale for display / museum purposes only, and therefore we would need to discuss any intended flight of the engine or any of its parts.
There is some damage to the nose of the engine which occurred after the item was collected and is not shown in the original photo. We have got images of the damage.
It is a non negotiable of sale that we will need to diligence check the intended use of any prospective buyer. In most cases, a non-flight disclaimer will be required unless you are able to provide appropriate documentation / evidence to demonstrate that any intended use will meet the requirements of the Civil Aviation Authority or other relevant governing bodies. We can discuss this further with you prior to sale and then we would need to approve any proposed flight plans with our university client prior to sale.
£ 3,055.00 (ex. VAT) 1 in stock
Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4
ITEM-21203
Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4
This unit came from an engineering university. It was used to develop and test for the motor industry. We were assured it was in good working order.
The Flange/Working Section External Dimension 56cm X 56cm
Included is a basic working section with two access panels. Approximate size of working section
56cm x 56cm X 100cm.
The Fan type is a K. Blackman 28 series.
The fan uses 7.5 kw Electric Motor with an inverter control.
It is split into 4 sections;
Unit 1- Main Fan/Control Unit- 130cmx130cmx175cm.-330 kg
Unit 2- Joint Section- 68cmx62cmx86cm.- 24 kg
Unit 3-Large Tunnel Section- 217 cmx77cmx149cm.- 150 kg
Unit 4- Work Access Unit- 57cmx54cmx81cm.- 22 kg.
Please enquire if you would like a delivery quote.
The last time when the nozzle calibration was ran for that tunnel and it went up to a measured airspeed of 26m/s (94km/h).
£ 3,005.00 (ex. VAT) 1 in stock
Solartron SI 1280 Electrochemical Measurement Unit Model - 1280A Lab
ITEM-19267
This Solartron SI 1280 Electrochemical Measurement Unit Model - 1280A was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further.
It is in reasonably good cosmetic condition but has some marks from use.
£ 3,000.00 (ex. VAT) 1 in stock
Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure
ITEM-35686
Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. The lab confirmed it was working prior to removal.
£ POA 1 in stock
Bridgeport JB12568 Milling Machine
ITEM-24215
This item is new in stock. Please enquire for further details.
£ 2,625.00 (ex. VAT) 1 in stock
CIF Technodrill 2 CNC Drilling & Milling Prototype Machine Lab
ITEM-23982
This CIF Technodrill 2 CNC Drilling & Milling Prototype Machine was removed from a university engineering department where it was surplus to requirements.
The item is in very good cosmetic condition. The lab said the machine is old technology but they believe it has never been used, having been purchased for an abandoned project some time ago.
It powers up and is in working order.
It can be used for small-scale milling work, in particular, milling printed circuit board designs onto copper-clad FR4 board. It comes complete with a wheeled enclosure made from Aluminium T-slot/acrylic.
The item comes with Galaad 3 user manual, and Galaad 3 CAD-CAM-CNC software for windows as well as some unopened accessories.
Item is wired with EU plugs. An adaptor is needed.
£ 2,375.00 (ex. VAT) 1 in stock
Schlumberger SI 1260 Impedance/Gain-Phase Analyser Lab
ITEM-35236
Schlumberger SI 1260 Impedance/Gain-Phase Analyser
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good cosmetic condition with minor marks from use.
The unit passed its self-test sequence.
£ 2,340.00 (ex. VAT) 1 in stock
SC Technical Services HP 500 HT-IR Heated IR UV Curing Conveyor Dryer Unit
ITEM-30211
SC Technical Services HP 500 HT-IR Heated IR UV Curing Conveyor Dryer Unit
This was removed from a university workshop where it was surplus to requirements.
The unit was confirmed as in working order with thermal (up to 130°C), IR and UV curing capabilities. It needs some maintenance and will likely need repair in the future.
The unit itself is 3m in length approximately 1.5m wide and 1.2m high and requires a three-phase electrical supply and ducted extraction to run.
Maintenance required – replace seals around oven lid and change UV bulb
Future repair – motors are in sealed (riveted) ducts and the bearings are worn and will need attention at some point.
There are no manuals included but the client has offered to demonstrate how to use it if required.
Items 1 to 20 of 212