Items 1 to 20 of 49

Image of item

£ 2,175.00 (ex. VAT) 1 in stock

Bellco Biotechnology Cell Production Roller Apparatus Cat no. 7630-75228 Lab

ITEM-27541

This Bellco Biotechnology Cell Production Roller Apparatus was removed from a university lab where it was surplus to requirements.


The unit powers up and runs up to 4000rpm. It is in good working order, and has had a brand new dial fitted.


It is in good cosmetic condition with minor marks from use.


9 x Roller levels/shelves


The motor was replaced on 13/12/19

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 2,130.00 (ex. VAT) 1 in stock

Integra Cellspin Cell Control Magnetic Stirrer Four-Platform System Lab

ITEM-27676

Integra Cellspin Cell Control Stirrer Four-Platform System


This was removed from a lab where it was surplus to requirements.


The unit has been tested by a service engineer and is in full recertified working order.


This listing consists of:


1 x Integra Cellspin Controller.

4 x Integra Cellspin Platforms.

3 x 186050 2m Control Cables.

1 x 186238 Controller PSU.


This system will allow you to run either 1 or 2 x Platforms at once. Only one controller cable is needed for this setup.


The system includes 2 x spare platforms and 2 x spare control cables. Another controller could be purchased from the distributor to allow for 2 complete 2 platform systems. We can quote for an extra brand-new controller if required.


The platforms have all had brand-new belts fitted and have been rpm-tested through the range.


Note that these platforms require spinner flasks to operate correctly. These can be purchased separately from the distributor. We can also quote for these flasks if required.


Image of item

£ 1,635.00 (ex. VAT) 1 in stock

PreSens Shake Flask Reader Model: SFR V2 Lab

ITEM-36179

PreSens Shake Flask Reader Model: SFR V2


This was removed from a university lab where it was surplus to requirements.


The unit has not been tested but is in good cosmetic condition with minor marks.

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 1,460.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 2000 CO2 Plus Digital Shaker with New Controller

ITEM-36217

Thermo Scientific MaxQ 2000 CO2 Plus Digital Shaker with New Controller


This was removed from a university lab where it was surplus to requirements.


The unit has been fully tested and has had a brand new PSU and controller added. It is in full recertified working order.


It is in excellent cosmetic condition with marks from use.

Image of item

£ 1,360.00 (ex. VAT) 1 in stock

WTW OxiTop IS BOD Self-Check Measurement System 12-Place Lab

ITEM-31866

WTW OxiTop IS BOD Self-Check Measurement System 12-Place


This was removed from a university lab where it was surplus to requirements.


The IS stirrer powered up without issue, the stirring function operated in all 12 positions and was measured at the operating temperature of 20°C.


All 12 heads are in working order. (Batteries supplied).


It is in good cosmetic condition with minor marks from use.


With it are;


1x AC/DC 24 volt adaptor plug.


2x User manuals


Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 955.00 (ex. VAT) 1 in stock

Illumina High-Speed Microplate Shaker Cat no. 945195 Lab

ITEM-19350

This Illumina High-Speed Microplate Shaker was removed from a university lab where it was surplus to requirements.


The unit is in full working order and has been assessed by a service engineer. It has had a brand new transformer fitted.


It is in good cosmetic condition with only minor marks from use.


Image of item

£ 940.00 (ex. VAT) 1 in stock

Wheaton 2-Tier Modular Roller Rack Apparatus Cat No 348970CE Lab

ITEM-38695

Wheaton Modular Roller Apparatus Cat No 348970CE


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order. The speed adjustment knob is missing, but still works.


Item has 2 tiers & 12 rollers.


Roller Area x 2: 52cm x 67cm.


Image of item

£ 555.00 (ex. VAT) 1 in stock

Jeio Tech Lab Companion Orbital Laboratory Shaker Model - SKC-6075 Lab

ITEM-24382

This Lab Companion Orbital Laboratory Shaker  Model - SKC-6075 was removed from a university lab where it was surplus to requirements.


The item powers on and appears to be in good working order with shaker speed running up to 410rpm. It comes with 8 Non-slip mats


The item is in good used cosmetic condition with light marks.


Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

29 x Various Vortex Mixers Stuart, Clifton & Hati Lab

ITEM-39692

29 x Various Vortex Mixers Stuart, Clifton & Hati


This job lot of items comes from a university lab, The items were no longer required.


None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.


None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.


They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.


The units have not been tested at all.

Image of item

£ 495.00 (ex. VAT) 1 in stock

Kuhner LS-W Lab Shaker Benchtop Orbital Platform Lab

ITEM-23933

This Kuhner LS-W Benchtop Orbital Platform Laboratory Shaker was removed from a university lab where it was surplus to requirements.


This unit came out of a university surplus equipment store. It had been unused for a while.


We powered the unit up with no issues. The unit worked faultlessly. We tested it through its range of speeds with no problems. There is a bed attached with a couple of attachments.


The maximum speed is 500 rpm.



The unit is in good condition with some marks of age and usage.


Image of item

£ 475.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova 2100 Laboratory Platform Shaker Lab

ITEM-26271

This New Brunswick Scientific Innova 2100 Laboratory Platform Shaker was removed from a university lab where it was surplus to requirements.


The unit powers up and is in reasonable cosmetic condition. The sticky pads on top are worn and will likely need to be replaced.


It runs up to 500rpm smoothly.


Platform size 61 x 46cm

Base 54 x 48cm




Image of item

£ 410.00 (ex. VAT) 1 in stock

Applikon Biotechnology AppliFlex Bioreactor Laboratory Rocker w/ Spares Lab

ITEM-31056

This Appikon Biotechnology AppliFlex Bioreactor Laboratory Rocker was removed from a lab where it was surplus to requirements.


The unit powers up and is in full working order up to 25rpm.


It is in good cosmetic condition with minor marks from use.



It comes with spares:

2 x Heat mats - 40 x 58cm

1 x Heat mat - 11 x 8cm

1 x Probe

2 x 50L Platforms

4 x 20L Platforms (one fitted to Rocker)


Dimensions - L56 W58 H54 (with 20L platform) 32cm without


Image of item

£ 405.00 (ex. VAT) 1 in stock

IKA KS 501 D Benchtop Laboratory Platform Shaker Lab

ITEM-23937

This IKA KS 501 D Benchtop Laboratory Platform Shaker was removed from a university lab where it was surplus to requirements.


We powered the unit up. It settled at zero rpm. We tested it through its rpm range and the maximum it achieved was 310 rpm.


It comes with a slot-in tray with bottle attachments. The unit is in good cosmetic condition but has some minor age and usage signs.


Image of item

£ 405.00 (ex. VAT) 1 in stock

IKA KS 501 D Benchtop Laboratory Shaker KS501D Lab

ITEM-23936

This IKA KS 501 Benchtop Laboratory Shaker KS501D was removed from a university lab where it was surplus to requirements.


We powered the unit up. It would not settle at zero rpm but around 2-3. We tested it through its rpm range and the maximum it achieved was 296 rpm.

It comes with a slot-in tray with bottle attachments.


It is in reasonably good cosmetic condition with marks from use.

Image of item

£ 380.00 (ex. VAT) 1 in stock

IKA-WERKE Platform Shaker Model: KS 501 Digital Lab

ITEM-24945

This IKA-WERKE Platform Shaker Model: KS 501 Digital was removed from a university lab where it was surplus to requirements.


The item is in reasonable cosmetic condition but there are some scratches/stains on the side panels and edges. The top of the shaker has warped, possibly from heat.


The item powers up without issue. When set to 300 it reached 328 rpm. The timer dial is also fully working.

Image of item

£ 330.00 (ex. VAT) 1 in stock

Infors HT AG Labotron Benchtop Orbital Shaker Lab

ITEM-36307

Infors HT AG Labotron Benchtop Orbital Shaker


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order. It is in good cosmetic condition with minor marks.

Image of item

£ 320.00 (ex. VAT) 1 in stock

Infors Labotron HT AG Benchtop Orbital Shaker Lab

ITEM-36308

Infors HT AG Labotron Benchtop Orbital Shaker


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order.


It is in good cosmetic condition with minor marks. We have kept the sticky strips on the unit as they are still usable.

Image of item

£ 315.00 (ex. VAT) 1 in stock

Infors HT AG Benchtop Orbital Platform Shaker Labotron Lab

ITEM-36309

Infors HT AG Benchtop Orbital Platform Shaker Labotron


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order.


It is in good cosmetic condition with minor marks. We have kept the sticky strips on the unit as they are still usable.

Image of item

£ 305.00 (ex. VAT) 1 in stock

Stuart Laboratory Flask Shaker Model - SF1 Lab

ITEM-34780

This Stuart Laboratory Flask Shaker Model - SF1 was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order.


It is in good cosmetic condition but has some marks from use.

Image of item

£ 300.00 (ex. VAT) 1 in stock

IKA Roller 10 Digital Lab Spares/Repairs

ITEM-36754

This IKA Roller 10 Digital was removed from a university lab where it was surplus to requirements.


The unit powers up with a 24V DC supply (not included).


Error 4 is displayed a few seconds after starting a run - 'Motor blockage or overload'. We followed the troubleshooting part of on online manual, but were unable to clear the error.


It is in otherwise good cosmetic condition with marks from use.


It is sold for spares/repairs.

Items 1 to 20 of 49

Filters

Price (£)

to

Condition

Brand