Items 1 to 20 of 79

Image of item

£ POA 1 in stock

Edwards 5 Two Stage High Vacuum Pump E2M5 Lab

ITEM-20113

This Edwards 5 Two Stage High Vacuum Pump E2M5 was removed from a university lab where it was surplus to requirements.


The pump powered up but cut out fairly quickly. The fuse hasn't blown do something else must have failed electronically. We were unable to diagnose the fault.


It is in reasonably good cosmetic condition but has some marks from use.


Included is;


1x Edwards High Vacuum Oil Mist Filter

EMF10


It is sold for spares or repairs.


Image of item

£ POA 1 in stock

3 x Edwards 'Speedivac' High Vacuum Pumps - ED50, ED35 Lab

ITEM-19922

3 x Edwards 'Speedivac' High Vacuum Pumps


These were removed from a university lab where they were surplus to requirements.


Included are;

2 x Model ED50

1 x Model ED35


All 3 pumps power on but have not been tested further.


They are in reasonable cosmetic condition with some marks from use.


Image of item

£ POA 1 in stock

4 x Edwards 'Speedivac' High Vacuum Pumps Two-Stage Model - 2S20 B Lab

ITEM-19921

4 x Edwards 'Speedivac' High Vacuum Pumps  Two-Stage Model - 2S20 B


These were removed from a university lab where they were surplus to requirements.


All the units power up but have not been tested further. They are in reasonable cosmetic condition but have some marks from use.




Image of item

£ 220.45 (ex. VAT) 1 in stock

Alcatel CA111 Pirani Lab Manometer Pressure Gauge

ITEM-06276

Alcatel CA111 Pirani Lab Manometer Pressure Gauge


Type 7975

Image of item

£ 257.21 (ex. VAT) 1 in stock

Balzers SVB 100 P UV UHV Gate Valve

ITEM-05100

This item has been taken from a UK University.


See photos.

Image of item

£ 140.65 (ex. VAT) 1 in stock

Biotage Pyrosequencing Vacuum Pump Prep Stand Workstation 60-0208 Lab

ITEM-17632

This Biotage Pyrosequencing Vacuum Pump Prep Stand was removed from a university lab where it was surplus to requirements.


The unit is in very good cosmetic condition but has been used previously.


It has not been tested.



Image of item

£ POA 1 in stock

Charles Austen Pumps Dymax 30 Vacuum Pump Lab

ITEM-16622

This Charles Austen Pumps Dymax 30 Vacuum Pump was removed from a university lab where it was surplus to requirements.


The pump is in reasonably good, used cosmetic condition but it does have some ink stains and marks here and there. The pump powers up appears to suck and blow as it should but has not been tested with a gauge.


The power light in the switch is slightly temperamental but this is very common for this type of switch. It doesn't affect the usage of the unit.



Image of item

£ 133.98 (ex. VAT) 1 in stock

DVP RC.2D 9602019 Rotary Vane Oil Bath Vacuum Pump Lab

ITEM-06929

This DVP RC.2D 9602019 Rotary Vane Oil Bath Vacuum Pump was removed from a lab where it was surplus to requirements.


The unit is in very good cosmetic condition and powers up, however, it has not been tested further.

Image of item

£ POA 1 in stock

Edwards 2 Stage High Vacuum Pump Model E2M2 Lab

ITEM-19331

Edwards 2 Stage High Vacuum Pump Model E2M2


This unit was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but it has marks from use. It also appears to have a good oil level. It likely would benefit from a good service.


It powers up and has been tested with a gauge (not included). It is drawing close to 12PSI/825mbar vacuum.




Image of item

£ POA 1 in stock

Edwards Datametrics 1500 Vacuum Pressure Controller & Barocel Sensor Lab

ITEM-18736

Edwards Datametrics 1500 Vacuum Pressure Controller & Barocel Sensor


These were removed from a university lab where they were surplus to requirements.


1 x Edwards Datametrics Pressure Controller

Model - 1500-4B-9H4


1 x Edwards Datametrics Barocel Pressure Sensor

Type - 600A-1000B-R12-H12X-4

Range - 1000 Millibars


The unit powers up but we were unable to test it further. We connected the sensor for the photos but they have been separated for safe storage.


Both units are in reasonably good cosmetic condition with marks from use.




Image of item

£ 158.07 (ex. VAT) 1 in stock

Edwards E2M 1.5 Vacuum Pump with EMF 3 Oil Mist Filter Lab Spares Repairs

ITEM-17881

This Edwards E2M 1.5 Vacuum Pump with EMF 3 Oil Mist Filter was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good used cosmetic condition but it does have various marks and signs of use.


The pump just buzzes when powered up. There was a note on the top from the lab that suggested it was not in working order.


Sold as spares/repairs.


Image of item

£ 1,433.76 (ex. VAT) 1 in stock

Edwards E2M40 Vacuum Pump Lab

ITEM-17092

This item originated in a working Lab in a top UK university and has come to us as part of a Lab Clear Out. 

The pump was serviced in July 2019 and was never used since then.


Image of item

£ 465.12 (ex. VAT) 1 in stock

Edwards E2M8 Two Stage Vacuum Pump Lab

ITEM-16933

Edwards 8 Two Stage Vacuum Pump

We have tested this unit up to -1 bar suction pressure and it worked fine, it did not show any obvious faults during the testing process.

Image of item

£ POA 1 in stock

Edwards EDM 2 High Vacuum Pump Lab

ITEM-19909

This Edwards EDM 2 High Vacuum Pump was removed from a university lab where it was surplus to requirements.


The unit powers up and it draws air, though it has not been tested with a gauge.


It is in reasonable cosmetic condition but has marks from use.


Image of item

£ 466.70 (ex. VAT) 1 in stock

Edwards EDM12A Vacuum Pump Lab 3 Phase

ITEM-16938

Edwards EDM12A Vacuum Pump Lab

This item originated in a working Lab in a top UK university and has come to us as part of a Lab Clear Out. We were told by the lab manager that this unit is in good working condition.

We have not tested this unit as requires a 3 phase main supply.

Image of item

£ 136.61 (ex. VAT) 1 in stock

Edwards EXC 200 Turbo Pump Controller UHV Vacuum

ITEM-06640

Edwards EXC 200 Turbo Controller - this item is part of a store room clear out from a top UK University.  It powers on but has not been tested further.

Image of item

£ POA 2 in stock

Edwards Penning 8 Gauge Controller & Edwards Penning CP25-K CathoVacuum Gauge

ITEM-18737

This Edwards Penning 8 Gauge Controller & Edwards Penning CP25-K CathoVacuum Gauge was removed from a university lab where it was surplus to requirements.


The unit has been tested with an Edwards pump (not included) and the gauge moved. It has not been tested further.


It is in reasonably good cosmetic condition but has some marks from use.


Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Image of item

£ POA 1 in stock

Edwards Penning CP25-EK Cold Cathode High Vacuum Gauge Part no. D145-41-000

ITEM-18743

This Edwards Penning CP25-EK Cold Cathode High Vacuum Gauge Part no. D145-41-000 was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition with some marks from use.


It has not been tested.



Image of item

£ POA 1 in stock

Edwards Penning CP25-EK Cold Cathode High Vacuum Gauge Part no. D145-41-000 Lab

ITEM-18744

This Edwards Penning CP25-EK Cold Cathode High Vacuum Gauge Part no. D145-41-000 was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition with some marks from use.


It has not been tested.

Image of item

£ POA 1 in stock

Edwards Penning CP25-K Cold Cathode High Vacuum Gauge Part no. D145-37-000 Lab

ITEM-18739

This Edwards Penning CP25-K Cold Cathode High Vacuum Gauge Part no. D145-37-000 was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has some marks from use.


It has not been tested.

Items 1 to 20 of 79