Items 341 to 360 of 1615

Image of item

£ POA 1 in stock

Beckman Coulter Z1 Particle Counter, Controller, Lab - Spares / Repairs

ITEM-16432

This Beckman Coulter Z1 Particle Counter was removed from a university lab where it was surplus to requirements.


The unit is in reasonable used condition with a damaged metal plate on the front of the unit as well as scratches and sticker marks. One of the glass jar racks has either been melted or bent.


The unit and the control panel turn on with everything lighting up. It has not been tested further.


Included with it are;

3 x Round Glass Jars & 1 squared Glass Jar.

2 x Glass Jar Racks.

1 x Plastic Rack



Image of item

£ 32.15 (ex. VAT) 1 in stock

Beckman Coulter Z2 Automated Counter Sample Vials 899366014 250pcs

ITEM-10143

This lot of sample vials was removed from a lab store during a clearout.


According to the part number they are sample vials for the Beckman Coulter Z2 Automated Counter


They are approx 5.5cm tall 3cm across the lid.

The box reads:


sample vials

Part number 899366014

Quantity 250pcs

Lot 16H4085


Image of item

£ 213.89 (ex. VAT) 1 in stock

Beckman Medical Gas Analyser LB-2 3-2 System Model 240m Carbon Dioxide Lab

ITEM-15747

This Beckman Medical Gas Analyzer LB-2 3-2 System was removed from a laboratory where it was surplus to requirements.


Model 240M


Cat No 149148.

and

2 x Cat No 149900. (One is a 3-2 which appears to be working and the other is a LB-2 which is faulty.)


All units appear to be quite old but they are in reasonable, used condition with various signs of use.

They come with a pickup head connector cable.


The main unit powers up fine and appears to power the remote unit. The compressor seems to work fine but we were not able to test it any further.


Please note this system will require calibration prior to use.

Image of item

£ 187.50 (ex. VAT) 1 in stock

Beckman Medical Gas Analyzer Analyser LB-2 System. Model 240M Sensormedics Lab

ITEM-15753

This Beckman Medical Gas Analyzer LB-2 System. Model 240M was removed from a laboratory where it was surplus to requirements.


Cat No 149530.

and

Cat No 149900.


Both units appear to be quite old but they are in reasonable, used condition. it also comes with a pickup head connector cable.


The main unit powers up fine and appears to power the remote unit. The compressor seems to work fine but the power button is a little temperamental.


We were not able to test it any further.


Please note this will require a calibration prior to use.

Image of item

£ 213.89 (ex. VAT) 1 in stock

Beckman Medical Gas Analyzer LB-2 Carbon Dioxide System. Model 240M Lab

ITEM-15750

Beckman Medical Gas Analyzer LB-2 System. Model 240M


Cat No 149148.

and

Cat No 149900.


Both units appear to be quite old but they are in reasonable, used condition. it also comes with a pickup head connector cable.


The main unit powers up fine and appears to power the remote unit. The compressor seems to work fine but the power button is a little temperamental. The main unit is missing a plastic foot.


We were not able to test it any further - please note it will require calibration prior to use.



Image of item

£ 239.80 (ex. VAT) 1 in stock

Beckman Oxygen Analyser Analyzer OM-11 System. Model 242B

ITEM-15745

This Beckman Oxygen Analyzer OM-11 System Model 242B was removed from a university where it was surplus to requirements.


Cat No 147592

and

Cat No 149600.


Both units appear to be quite old but they are in reasonable, used condition with various signs of use.


The main unit powers up fine and appears to power the remote unit and the compressor seems to work fine. The display does not light up on power on. But when you engage the operation button the display then works.We were not able to test it any further.


Included is a pickup head connector cable.


Please note this will require calibration prior to use.

Image of item

£ 300.00 (ex. VAT) 1 in stock

Beckman Oxygen Analyzer OM-11 System Model 242B

ITEM-15749

This Beckman Oxygen Analyzer OM-11 System Model 242B was removed from a university where it was surplus to requirements.


Cat No 147592

and

Cat No 149600.


Both units appear to be quite old but they are in reasonable, used condition with various signs of use.


The main unit powers up fine and appears to power the remote unit and the compressor seems to work fine. The display does not light up or seem to function. We were not able to test it any further.


Included is a pickup head connector cable.


Please note this will require calibration prior to use.

Image of item

£ 119.90 (ex. VAT) 1 in stock

Beckman Oxygen Analyzer OM-11. Cat No 5546000. Lab

ITEM-15733

This Beckman Oxygen Analyzer OM-11 Cat No 5546000 was removed from a university where it was surplus to requirements.


The unit is in reasonable, used cosmetic condition but it is untested.


Image of item

£ 93.75 (ex. VAT) 1 in stock

Beckman Tube Sealer for 8 x 13.4mm x 60mm Tubes Lab

ITEM-16636

This Beckman Tube Sealer was removed from a university lab where it was surplus to requirements.


The unit is in good, used cosmetic condition but it does have various marks from use.


It powers up fine and we have checked the sealer head with a thermometer when powered up. It heated to around 75degC. It has not been tested to actually seal anything.


It also comes with a holder block for the tubes which will hold 8 x 13.4mm x 60mm tubes. This measurement is taken from the bottom of the sealing head when it's at its lowest.


Image of item

£ 114.02 (ex. VAT) 1 in stock

Becton Dickinson Facs Loader Electronics +0 2-61753-01 REV A Lab

ITEM-08593

This unit was removed from a research lab as surplus to requirements.


We have not tested the unit.


We are unsure if the other Becton Dickinson parts are related to the FACS loader electronics.

Image of item

£ 103.35 (ex. VAT) 1 in stock

BEDFONT BT-100 Laboratory Oxygen Meter Lab

ITEM-08507

This set was removed from a lab store room during a clearout. We were assured the unit is working by the lab group, but we have only powered it on ourselves.

Image of item

£ 73.39 (ex. VAT) 1 in stock

BEDFONT TM 40 Laboratory Analyzer %N2O Gas Quality Analyser

ITEM-08506

This unit was removed from a lab during a clearout. We were assured the unit is in full working order by the lab.


We have powered on the unit but not tested it further.

Image of item

£ 75.00 (ex. VAT) 1 in stock

Bel 6 Channel Auto Switcher Lab

ITEM-11137

This unit was removed from a university physics lab as surplus to requirements.


We have powered the unit on but not tested it further.

Image of item

£ 60.00 (ex. VAT) 1 in stock

Bibby B292 Hotplate Magnetic Stirrer Mixer Lab - Spares Repairs

ITEM-15321

This Bibby B292 Hotplate Magnetic Stirrer was removed from a laboratory where it was surplus to requirements.


The unit powers on and the stirrer has been tested as working. The control knob for the hotplate has been snapped off however so we were unable to test the functionality of it. The potentiometer on it is faulty and will need replacing. The unit is showing heavy signs of use cosmetically.


Unit is sold as spares/repairs as its only the stirrer that is working at the moment.

Image of item

£ 103.31 (ex. VAT) 1 in stock

Bibby HB501 Lab Magnetic Stirrer

ITEM-13063

This unit was removed from a lab as surplus to requirements.


The magnetic stirrer appears to be in good working order. Beaker and magblock not included.

Image of item

£ 106.88 (ex. VAT) 1 in stock

Bibby HB501 Magnetic Stirrer Lab

ITEM-13060

This unit was removed from a lab as surplus to requirements.


The magnetic stirrer appears to be in good working order. Beaker and magblock not included.



Image of item

£ 142.50 (ex. VAT) 1 in stock

Bibby PFL001B Pipette Controller (Lot of 18)

ITEM-09377

These units were removed from a lab during a clearout as they were surplus to requirements.. They are believed to be in working condition.

Image of item

£ 122.17 (ex. VAT) 6 in stock

Bibby Scientific CB160 Hotplate Lab

ITEM-10412

This unit was removed from a lab as surplus to requirements.


On testing it reached 305C so appears to be in full working order.


Please note our thermometer is not included in the sale.

Image of item

£ 101.53 (ex. VAT) 1 in stock

Bibby Sterilin Aspirator S37 Lab

ITEM-12655

This unit was removed from a lab as surplus to requirements.


Unit powers on but we have not tested it further.

Image of item

£ POA 1 in stock

Bibby Stuart Orbital Platform Shaker Model SO1 Lab

ITEM-16580

This Bibby Stuart Orbital Platform Shaker Model SO1 was removed from a university lab where it was surplus to requirements.


The unit powers on and appears to be in good working order. The power on/off switch is a little stiff but works and there is one missing orange cap for the rubber mat.


Cosmetically it is in reasonable cosmetic condition but has been previously well used. There are signs of rust and paint coming off, but mostly underneath the unit.


Items 341 to 360 of 1615