Items 581 to 600 of 1509

Image of item

£ 2,894.39 (ex. VAT) 1 in stock

Emitech K450 K450X Carbon Sputter Coater Thin Film Coating Lab

ITEM-09199

This Emitech K450X Carbon Coater was removed from a lab where it was surplus to requirements.


The unit powers on but has not been tested further than this. It is in good condition but looks t be fairly heavily used.


The unit was recently returned to us with the user stating that the coater was heavily used with carbon target thus it was difficult to be used with other metal targets. Again, we have not fully tested this ourselves, but this is worth noting.


Image of item

£ 60.00 (ex. VAT) 1 in stock

EO Edmund Industrial Optics Model 21AC StockerYale Fibre Optic Light Source Lab

ITEM-15337

EO Edmund Industrial Optics Model 21AC StockerYale Fibre Optic Light Source


This was removed from a laboratory where it was surplus to requirements. It is in good, used cosmetic condition.


The unit powers on and seems to be working correctly. The light intensity changes when the dial is adjusted. It has not been tested any further.






Image of item

£ 150.00 (ex. VAT) 1 in stock

Eppendorf Mini Spin Bench-Top Microcentrifuge Inc F-45-12-11 Rotor Lab

ITEM-14219

Eppendorf Mini Spin Bench-Top Microcentrifuge.


This item was removed from a lab during a clear out.


Unit works quite well.

Has a few lid issues now and then.

Where the lid was closed, but the unit said it was open.

It didn't happen all of the time.


Unit is quite corroded in places.

ie, inside the lid and on the very back.

Appears to be very common with this model.

This has been shown in pictures.


Otherwise the unit runs ok.

Has been tested up to max of 13,400rpm.

It is quiet and runs well.


Includes F-45-12-11 Rotor.


Due to the rust, unit should be fully inspected and tested by a competent engineer prior to use.

Image of item

£ 174.67 (ex. VAT) 1 in stock

Eppendorf Transjector 5246 + Controller 524600978 Lab

ITEM-15349

This Eppendorf Transjector 5246 With Controller was removed from a laboratory where it was surplus to requirements.


The unit powers up and makes pumping/blowing noises but we were unable to test any further.


The buttons on the controller make it do different things so that appears to be working too.


Both units are in very good cosmetic condition but they do have some slight signs of use.




Image of item

£ 504.17 (ex. VAT) 1 in stock

EquiBio EASYJECT PLUS Electroporation System Single/Twin-Pulse with Accessories

ITEM-06376

EquiBio EASYJECT PLUS Electroporation System Single/Twin-Pulse with Accessories.  This system was pulled from a working Laboratory in a top UK University as part of a Lab Clearance.


The System consists of:


Main System on wheels plus the following accessories:


Remote Control Unit 

2 x Electroporation Chambers

Printer (the printer appears to have a plate missing from top of unit - please see photo's)

Cables


The Main Unit and Remote Control Unit both power on but we do not have the expertise to fully test the whole system.


 Please note:  We have not powered on or tested the accessories

Image of item

£ 101.74 (ex. VAT) 1 in stock

Equibio OM 100 Printer & Control Unit Lab

ITEM-15548

This Equibio OM 100 Printer & Control Unit was removed from a laboratory where it was surplus to requirements.


The units are in good cosmetic condition and the OM100 Printer powers up but we were unable to test them any further. We were unable to power up the Control Unit due to a lack of power supply, and the units appear to be missing the cable that connects them together.




Image of item

£ 85.72 (ex. VAT) 1 in stock

Erweka ZT3-1 Disintegration Tester Lab

ITEM-08702

This unit was removed from a lab store room as surplus to requirements. The unit powers on but has not been tested further.

Image of item

£ 225.00 (ex. VAT) 1 in stock

ESI Nuclear Scintillation Adaptor 288, Autoscaler 237 & Quench Probe 253 Lab

ITEM-16134

ESI Nuclear Scintillation Adaptor, Nuclear Autoscaler & Nuclear Quench Probe.


These units were removed from a university lab where they were surplus to requirements.


Included is;


Scintillation Adaptor 288

It powers on but we were unable to test any further.

Cosmetically the item is in reasonably good condition.


Autoscaler. Timer. Frequency. Ratemeter. 237

It powers on but we were unable to test any further.

Cosmetically the item is in reasonably good condition.


Quench Probe Unit 253

It plugs into both other units and appears to power on but we were unable to test further.

Cosmetically it is in reasonably good condition


There is also some sort of bracket/fitting which seems to be part of the set-up.


Image of item

£ 223.45 (ex. VAT) 1 in stock

ET3000 Electronic Tourniquet Scandmed Lab Medical

ITEM-11510

This unit was removed from a university life sciences lab as surplus to requirements.


We have powered on the unit but not tested it further.

Image of item

£ 63.75 (ex. VAT) 1 in stock

Ether Type 100 Analog Temperature Gauge Lab 0-1400C

ITEM-13169

This unit was removed from a lab during abuilding closure.


We have not tested the unit. There is unfortunately some damage on the units underside (as shown in the photos).


Gauge appears to read 0-1400C, but we have no manual to confirm if it actually works at the upper end of those readings.

Image of item

£ 450.00 (ex. VAT) 1 in stock

ETP #113710 Ion Detection Electron Multiplier Galileo Channeltron Lab

ITEM-14492

ETP #113710 Ion Detection Electron Multiplier Galileo Channeltron.


This item was removed from a lab during a clear out.


#113710

AF515

HP5971, HP5971A, HP5971B.


The report from the university said its brand new and unused.

It does appear to be in very good, possibly unused condition.


Item has not been tested

Boxed and bagged.


Please see photos for more details.




Image of item

£ 112.50 (ex. VAT) 1 in stock

ETP Model AEM 8501 Electron Multiplier Lab

ITEM-14530

ETP Model AEM 8501 Electron Multiplier


This item was removed from a lab during a clear out.


ETP Electron Multiplier.

Model No AEM 8501.

Serial No 2003.

Made in Australia.


Appears to used - we have not tested the unit.


Please see photos for more info.


Image of item

£ 148.19 (ex. VAT) 1 in stock

Eurotherm Chessell Model 4103C Chart Recorder with Pens, Paper & Manuals Lab

ITEM-15925

This Eurotherm Chessell Model 4103C Chart Recorder with Pens, Paper & Manuals was removed from a university laboratory where it was surplus to requirements.


The unit powers up fine but we were not able to test any further. It is in good cosmetic condition but has been previously used.


It also comes with the following extras:

1 x User Manual.

1 x Box of 6 x Sanyo Recording Paper.

1 x Box of paper GD128970U075. Brand new Sealed.

1 x Box of paper GD128970U050. Brand new Sealed.

1 x Box of paper GD128970U050. Brand new Sealed.

3 x Pens LA 249 552. Brand new Sealed.

3 x Pens LA 249 551. Brand new Sealed.

1 x Pen LA 249 551 looks used

1 x Part LA 249 550. Brand new Sealed.


Image of item

£ 135.33 (ex. VAT) 1 in stock

EV1065 Temperature Controller Lab

ITEM-11235

This unit was removed from a University Physics lab as surplus to requirements.


At our site, we have powered it on but not tested it further.

Image of item

£ 134.92 (ex. VAT) 1 in stock

Evoqua Ultra Clear TW UV Triple Red Lab Water Purifier (Spares & Repairs)

ITEM-13422

This Evoqua Ultra Clear unit was removed from a university as part of a clearance.


The main unit has quite a large crack in the plastic and the screen is blank, so would seem to be spare or repairs only.


Tank and tubing also included. Good condition overall aside from the damage.

Image of item

£ 112.50 (ex. VAT) 1 in stock

Express Equipment 25L Universal Electric Model Pressure Steam Steriliser Lab

ITEM-06905

This Express Equipment 25L Universal Electric Model Pressure Steam Steriliser was removed from a lab where it was surplus to requirements.


It is in reasonable cosmetic condition but has been previously used. It powers on an the element heats up but we have not tested it further.


As this is a pressure steriliser - it must be safety inspected by a competent engineer prior to use.



Image of item

£ 675.00 (ex. VAT) 1 in stock

Farnell Spectrum Analyser 352C 300kHz-1GHz Model 17352C Lab

ITEM-06890

This Farnell Spectrum Analyser 352C 300kHz-1GHz Model 17352C was removed from a lab where it was surplus to requirements.


The unit powers on and appears to be in good condition, with dials etc operating as would be expected, but it has not been tested further. Cosmetically it is in a reasonable, used condition.

Image of item

£ 168.75 (ex. VAT) 1 in stock

Faro B06/ REV 17 Arm Portable Protective Instrument Flight Case Extra Large

ITEM-13001

This large protective instrument case was removed from a university store room during a building clearance.


It is a very large case, measuring approxiamtely 114l x 62w x 40h. Please enquire if you would like us to check internal dimensions.



Image of item

£ 118.46 (ex. VAT) 1 in stock

Faro Ornago LC 81 Dental Drill - Faulty Drill

ITEM-13219

This unit was removed from a university dental hospital during a clearout.


The main unit powers on but the drill will not run. We tested the drill in another unit but it wouldn't run in that either - so we believe the fault is with the drill.


Set is sold as spares/repairs.




Image of item

£ 30.00 (ex. VAT) 1 in stock

Faulty Hanna Instruments HI 300N Magnetic Stirrer Lab (Spares/Repair)/

ITEM-14060

This Faulty Hanna Instruments HI 300N Magnetic Stirrer was removed from a university during a clearance.


It does power on and did run briefly during testing. It ran for a short while before it stopped and would not run again.


It is in good cosmetic condition but is spares/repairs only.



Items 581 to 600 of 1509