This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requirements.

Included are;

1x Olympus Fluoview

Model FV1000

The unit is in good cosmetic condition, but the power cables were missing so it has not been tested.

The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed.

1x Olympus Transmitted Light Detector:

Model FV10-TD

The unit is in good cosmetic condition.

1x Olympus Control Box:

Model IX2 UCB

The unit powers on and is in good cosmetic condition.

1x Olympus Power Supply:

Model FV10-PSU

The unit powers on and is in good cosmetic condition.

1x FV10-PSU Key:

Model 1201

The unit is in good cosmetic condition.

1x Olympus Hand-switch:

Model U-HSTR2

The item powers on and is in a reasonable, used cosmetic condition.

1x Olympus Laser Diode Interface Controller:

Model FV10-LDIF

The unit is in good cosmetic condition. The PSU is missing.

1x Olympus Power Supply:

Model U-RFL-T200

Life Time: 3667 hours

The unit powers on and is in good cosmetic condition.

It is not known if the Burner has been replaced after 200 hours.

1x Olympus Mercury Light Source:

Model U-LH100G

The unit powers on and is in good cosmetic condition. The Lamp is working.

1x Olympus Light Source Stand

Model FV10-FIR

The unit is in good cosmetic condition. There are some scuffs and scratches from general use.

1x Olympus Power Supply:

Model FV5-LDPSU

Running hours: 79335.3

The unit powers on and is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units.

1x FV5-LDPSU Olympus Power Supply Key:

Model 1201

The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply.

1x Olympus Laser Head

Model LD405

The unit is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply.

1x IW-R3000N Rack Mountable Server Chassis

The unit powers on and is in good cosmetic condition.

Accessories:

1x Olympus objective correction cap

Model CAP-G0.5 ± 0.5

The unit is in good cosmetic condition

1x Olympus Laser safety shutter

Model F10-SHAUX

The unit is in good cosmetic condition.

1x Olympus Goose neck fibre optic light pipes

Model LGS3F1200UV

The unit is in good cosmetic condition.

Spacers:

2x L3cm xW3cm xH0.5cm

2x L4cm x W4cm x H0.5cm

The units are in good cosmetic condition.

Misc Accessories:

1x IW-R3000N Rack Mountable Server Chassis User manual V2.1

1x Microsoft Windows 2000 XP professional Inst/uninst CD

1x Belkin Serial Adaptor

1x RCA Phono male to male cable (sealed)

1x SATA Cable (C13214-001 FOXCON 0550)

1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable

1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor

1x RCA Female to mini DIN 8-PIN connector (sealed)

1x VGA to DVI connector (sealed)

Installation discs:

2x Belkin USB Adaptor Installation

1x Intel Express installer

1x Sapphire installation driver

1x mini disc

Thorlabs Optical Educational Kits - Microscope Micromanipulator Parts, Lenses

This was removed from a university lab where it was surplus to requirements

The parts included are;

3x Aluminium Breadboards: -

1x MB3045/M

with: -

2x Thorlabs XR50/M - 50 mm Travel Linear Translation Stage with 2x Side-Mounted 0-50 mm Mitutoyo 0.01 Micrometers, M6 x 1.0 Taps.

1x Thorlabs M430L4 430 nm, 490 mW (Min) Mounted LED, 500 mA

S/N: M00608037

1x Thorlabs SM1U25-A Adjustable Collimation Adapter with Ø1in Lens

1x Thorlabs CP33T/M SM1 Threaded 30 mm Cage Plate

1x Basler acA1300-30um USB Camera

I/D: 106217 - 18

S/N: 22114520

1x Thorlabs DFM1/M-P01 Kinematic Beam Turning Cage Cube with Silver-Coated Right-Angle Prism Mirror, 450 nm - 20 µm

1x Olympus Plan N 10x/0.25 ∞/-/FN22 Objective Lens

1x Thorlabs TTL100 Tube Lens f= 100mm/450-700nm

∞/ Øep 14 mm / WD60 mm

1x Basler acA1300-30um USB Camera

I/D: 106217 - 18

S/N: 22114520

1x Blue USB Camera connection cable

1x Strobe Generator Rev A PCB with XP Power 6 volt power supply and 2x optical cable connectors

1x MB3030/M

with: -

1x Strobe Generator Rev A PCB with 2x optical cable connectors

1x Thorlabs BA4/M Mounting Base

1x Thorlabs XYF1/M XY Mount for 1/2in -3in Rectangular Optics

1x Olympus Plan N 10x/0.25 ∞/-/FN22 Objective Lens

1x Thorlabs M430L4 430 nm, 490 mW (Min) Mounted LED, 500 mA

S/N: M00715669

1x Thorlabs SM1D12 Lever-Actuated Iris Diaphragm (Ø1.0 - Ø12.0 mm)

1x Thorlabs RLA300/M Dovetail Optical Rail 300 mm

1x Basler USB Camera

I/D: 106687 - 15

S/N: 23849639

1x MB3045/M

with: -

2x Thorlabs Compact XRN25/M - 25 mm Travel Linear Translation Stage with 1x End-Mounted 0-25 mm Mitutoyo 0.01 Micrometer, M6 x 1.0 Taps.

1x Thorlabs C1011/M Post Clamp

1x StarTechcom Powered USB Hub with blue USB cable

P/N: ST103008U2C

1x StarTechcom 12-volt power supply

M/N: P12014000

1x Thorlabs T-Cube LED driver

1x Thorlabs M430L4 430 nm, 490 mW (Min) Mounted LED, 500 mA

S/N: M00608036

1x Thorlabs MP100-RCH1 Recording Chamber Holder

1x Thorlabs MPA1/M Rigid Stand Adaptor Plate

1x Thorlabs XRN25/M Rail Plate for 2in Dovetail Rails, M6 x 1.0 Taps with 2x Side-Mounted 0-25 mm Mitutoyo 0.01 Micrometers

1x Advanced MicroFluids RVM Low Power OEM Rotary Drive

S/N: P200-000000119

2x 1x Advanced MicroFluids RVM Fast OEM Rotary Drive

S/N: P201-000000429

S/N: P201-000000239

1x Basler USB Camera

I/D: 106687 - 15

S/N: 23389918

1x XP Power 15 volt Power Supply

2x Mean Well 18 volt Power Supply

P/N: GSM40A18-P1J

SIS Linos CL 1.4/50 Macro-2 MegaView Camera for Electron Microscope

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition and contains the following camera and housing. We were unable to test this at our facility.

Model: Linos CL 1.4/50 Macro-2 MegaView

Serial#: 0395

Barcode#: 07640521

Prior Optiscan ES9Z Microscope Stage Controller with CS152Z

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

Included with it are;

1 x Rotary wheel control module with up, down and speed buttons. Model CS152Z Serial No. 36341

1 x 12v power adapter

This Zeiss Microscope Multi Observation Bridge Left and Right with Pointer was removed from a university lab where it was surplus to requirements.

This item is in very good cosmetic condition.

This item is untested and the PSU is not included.

This Olympus U-ETBI Microscope Ergo Head Tilt Telescope was removed from a university lab where it was surplus to requirements.

Item appears to function correctly after being tested over a light source and slide and is in very good, clean condition.

No further testing was carried out.

Leica Camera Software Kit V4.1.0 CD

This was removed from a university lab where it was surplus to requirements.

The disk has the following software;

DFC Twain Driver V7.6.0

Leica Map V6.2

Firecam V3.4.1 for Mac OSX

Sony 3CCD Colour Video Camera DXC-390P and Adaptor CMA-D2CE

This was removed from a university lab where it was surplus to requirements.

All modules power up but have not been tested further.

Everything is in good cosmetic condition with minor marks.

Camera:

Model DCX-390P

Serial No. 401881

3-CCD 1/3" format, 800 tv lines S/N 63, RGB C-mount camera

Adaptor:

Model CMA-D2CE

Serial No. 27147

Included with the camera and adaptor are a power lead, a dc power lead and data lead between the two units.

This Genetix GSL-10/GSL-120 Automated Microscope Stage ME002808-B was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition but hasn't been tested.

For use with the GSL-10 (10 sliders) or GSL-120 (120 sliders) slide loaders.

This Prior STG8029 Automated Microscope Stage was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition but hasn't been tested.

Leica Microscope Micromanipulator with Stand

This was removed from a university lab where it was surplus to requirements.

The unit is in good working order and good cosmetic condition with minor marks from use.

Olympus  U-ULS100HG Lamp & U-RFL-T Power Supply  - U-RFL-T-200 U-ULH Lab

This was removed from a university lab where it was surplus to requirements.

Both units power up and are in good cosmetic condition with minor marks.

Included are;

Olympus U-RFL-T Power Supply

Model: U-RFL-T-200

Serial#: 2509037

Front of the unit displays 191.1 hrs Life Time.

Olympus U-ULS100HG Lamp

Model: U-ULH

Serial#: 5B04217

This Olympus Motorized Reflector Turret  Model - I X2-RFACA was removed from a university lab where it was surplus to requirements.

The unit has not been tested but it is in good cosmetic condition with some light usage marks.

This Leica Microscope Objective Pl Apo 63X/1.32-0.6 506081 was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition. There is a small scratch on the lens.

A microscope engineer assessed the objective and it worked fine on their microscope, though they did suggest it may work differently depending on the microscope it is attached to.

Job Lot of 12 x Carl Zeiss Microscope Objectives - Ph2, Ph3, Ph1, PLAN, Neofluar

These were removed from a university lab where they were surplus to requirements.

They are in good cosmetic condition with minor marks.

Ph2 Neofluar 25/0.60 160/0.17 (4057909)

Ph2 Neofluar 16/0.40 160/- (46 05 21-9901)

Neofluar 100/1.30 0el 160/- (4058232)

Plan 6.3/0.16 (4055850)

Plan 40/0.65 160/0.17 (4868663)

Plan 100/1.25 0el 160/- (4846219)

Ph3 Neofluar 100/1.30 0el 160/- (4077281)

Plan 100/1.25 0el mJ 160/- (19336)

Planapo 100/1.32 0el 160/- (4114845)

Plan 6.3/0.16 160/- (5211196)

Neofluar 100/1.30 0el (4080823)

Ph1 F-LD 20/0.25 (46 06 06)

Thorlabs MBT602 3-Axis XYZ MicroBlock Compact Flexure Stage 4mm Travel

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks from use.

This Carl Zeiss Microscope 1058-431 Light Channel & 1269-480 Switching Mirror was removed from a university lab.

They units are in good cosmetic condition but have not been tested.

Nikon HB-10104AF Lamp Supply + Nikon HG 100W Lamp

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

Runtime- 910 hours

Power supply model number- HB10104AF

Power supply serial number- 7100798

Lamp model number- LH-M100CB-1

Lamp serial number- 131233