TTP LabTech Mosquito LCP Automated Liquid Handling

This item was removed from a university lab where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was working order prior to removal.

Specifications:

• Model: Mosquito LCP
• Serial No.: LCP-601

Hamilton Microlab Star Liquid Handler Workstation

This system was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition, with some screws missing from the outer panels and one side panel replaced with a shorter piece of plexiglass. Additionally, 2/5 legs are missing their rubber footpads.

The system could not be tested further due to the absence of a PC w/ relevant control system.

The previous client has stated it was in working order prior to removal.

Included:

• 5 x 24-Tube Holder Racks (Part No. 173400/02)
• 3 x 5-Plate Holder Racks (Part No. 182090/02)
• 1 x 5-Set Tip Carrier Rack (Part No. 182085/03)
• 1 x Data Cable

Specifications:

• Model: Microlab Star
• Serial No.: 1015
• Part No.: 173 009/80

Hamilton Microlab Star Liquid Handler System

This system was removed from a university lab where it was surplus to requirements.

The system powers on and is in excellent cosmetic condition.

According to the previous owner, the system is fully operational but was sold due to lack of use and space constraints.

They also notified us that it was retrofitted with a 96well head just a few years ago.

This item was last serviced in March 2023.

Model: Microlab Star

Serial No.: 1238

Included Components:

• ONEAC Power Supply Unit (PSU)
• Model: MCU500
• Serial No.: W05/00416/3

• Microlab Star Pump Unit P
• Part No.: 186375/01
• Serial No.: 1057

• CO-RE Tips:
• (10 Boxes) x 12 x 480 50μl filter tips (Pink Label)
• REF: 235979, LOT: 7143772, GTIN: 07630032624023, Expiration Date: 2024-10-28
• (1 Box) x 8 x 480 High Volume Tips (White Label)
• REF: 235939, LOT: 4120811, GTIN: 07630032623910, Expiration Date: 2024-04-28
• (12 Boxes) x 480 Standard Volume Tips (Yellow Label)
• REF: 235937, LOT: 4148305, GTIN: 07630032623880, Expiration Date: 2024-10-28

• Software: Hamilton Microlab STAR Venus Four Base Package 4.5 (USB Drive)

• Additional Accessories:
• 13 x Mixed Plate Carriers

Perkin Elmer JANUS G3 Automated Workstation Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order.

Please note that the unit has shipping locks in place and should not be powered up with these in place.

The user log-in information for the included PC is available on request.

This system comprises the following:

• Perkin Elmer JANUS G3 Automated Workstation
• PC, Monitor, Keyboard & Mouse - WinPREP software installed on PC
• PerkinElmer Peri Pump
• Ducting
• 2 x Waste bottle
• Plate support tiles
• Trough holders
• NewLand Scanner
• 10 packs of conductive filter tips
• Ares 2000RT conversion rack

Perkin Elmer JANUS G3 Automated Workstation Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order.

Please note that the unit has shipping locks in place and should not be powered up with these in place.

The user log-in information for the included PC is available on request.

This system comprises the following:

• Perkin Elmer JANUS G3 Automated Workstation
• PC, Monitor, Keyboard & Mouse - WinPREP software installed on PC
• PerkinElmer Peri Pump
• Ducting
• 2 x Waste bottle
• 3 x Cooling tube holders
• Plate support tiles
• Trough holders
• NewLand Scanner
• 56 barcode racks
• Ares 2000RT conversion rack

This was removed from a university lab where it was surplus to requirements.

Included are;

Gilson 268 Pipetmax

Model no. 32100001

SN - 321D6A042

Unit dimensions - L63 W52 H70cm

The item powers on and is in reasonable used cosmetic condition, there are a few cracks around the unit on the perspex covers.

Windows Tablet

Model no. 32000321

SN - 66MCV22

The tablet automatically starts up Gilson Trilution Software. We have the password available on purchase.

Gilson Model GCP Dell Doc

SN - G00M-A00

3 x Gilson Dongles:-

LT3204USB PIPETMAX Docs v2 Reference Docs 1.1

LT3203USB TRILUTION micro V2 Documentation v1.2

Blue Dongle labelled Trilution

Gilson 5mm Allen Wrench (4320502)

AC Power Adaptor

Consumables:-

6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 50μl (15 x 96 Tips in Racks) Full & Sealed inside

1 x Box of Eppendorf epT.I.PS. Motion 1 - 50μl (10 x 96 Tips in Racks) 9 Sealed inside

6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 20-300μl (15 x 96 Tips in Racks) Full & Sealed inside

1 x Box of Eppendorf epT.I.PS. Motion 1 - 20-300μl (11 x 96 Tips in Racks) Sealed inside

16 x Boxes of Gilson DL10 Diamond Reload Packs (960 Tips per box Volume Range 0.1 - 20μl)

1 x Box of Gilson DL10 Diamond Reload Packs (257 Tips in box Volume Range 0.1 - 20μl)

18 x Boxes of Gilson DL200 Diamond Reload Packs (960 Tips per box Volume Range 2 - 200μl)

1 x Box of Gilson DL200 Diamond Reload Packs ( 192 Tips in box Volume Range 2 - 200μl)

Perkin Elmer Janus G3 Integrator Varispan Deck Liquid Handler

This item was removed from a university laboratory where it was surplus to requirements.

It powers up when switched on and is in good used cosmetic condition. Further testing has not been conducted, but we were informed they were in working condition prior to removal.

Includes a deck plate for 24 microplates. WinPrep software is available for setup with a PC upon customer request.

Specifications.

• Model: Janus G3
• Serial No.: JA2049N3797

Perkin Elmer Janus G3 Standard Varispan Deck Liquid Handler

This item was removed from a university laboratory where it was surplus to requirements.

It powers up when switched on and is in good used cosmetic condition. Further testing has not been conducted, but we were informed they were in working condition prior to removal.

Includes a deck plate for 24 microplates. WinPrep software is available for setup with a PC upon customer request.

Specifications.

• Model: Janus G3
• Serial No.: JA2049N3797

Beckman Coulter Biomek NX S8 Laboratory Automation Workstation

This was removed from a university lab where it was surplus to requirements.

The system powers up, communicates with the PC and is in good working order.

It is in good cosmetic condition with minor marks from use.

Included are;

Model - Biomek NX S8

SN - 9898860170

Beckman Coulter Biomek Valve unit

Cat no. 719657

SN - 5080667

PC Accessories include:

Lenovo ThinkCentre PC - Has Biomek software version 4.1

AMW 17" LCD Monitor

Lenovo keyboard & mouse

Box of accessories/consumables includes:-

Cables

Beckman Coulter Tube Rack (Boxed)

Beckman Coulter Image MORBM33A Recovery DVD

Acronis True Image 2016 #1 Backup Solution DVD

Beckman Coulter Biomek Seal & Sample Aluminum Foil Lids

Beckman Coulter SPAN-8 P250 COND.N/S Tips (1 Rack)

2 x Beckman Coulter Modular Reservoir Quarter Module 19ml (Cat-372788)

Beckman Coulter Modular Reservoir Full Module 150ml (Cat-372784)

Beckman Reservoir holder (Cat-372795)

Beckman Capstrip (267002)

3 x Packs Blue 13mm Inserts (5 Per Pack)

3 x Packs Red 12mm Inserts (5 Per Pack)

3 x Packs Black 10mm Inserts (5 Per Pack)

1 x Pack White 11mm Inserts (5 In Pack)

Bag of mixed Tecan syringes

Back of 4 gauges

Lead Screw with nut (Ref-989458)

Elektroden EL8/4V (B-3204021)

Redd & Whyte Preddator Liquid Handling Robot System

This was removed from a university lab where it was surplus to requirements.

The unit powers up, passes all self-checks and the arm moves. It is in good cosmetic condition with minor marks from use.

There is a laptop with it, which unfortunately has had the hard drive removed and has no software. There are a lot of discs supplied but none are the control software for the system.

1x Windows XP Professional Installation CD 2002

1x Dell Monitor Software CD

1x Dell Installation Software CD

1x Windows XP Professional Installation CD, discs1, 2, 3 and 4

1x Datalogic WinHost 2.00 Configuration CD 2004

1x Moxa Networking CD

1x Windows XP Professional Guide Pamphlet

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3

This was removed from a university lab where it was surplus to requirements.

All the units power up but have not been tested further.

It is in good cosmetic condition with minor marks.

It is made up of the following modules;

1x Tecan RSP 5031 Robotic Sample Processor

S/N: 1652 JR

1x Emka STC 8808

S/N: 00454

1x Emka IOS 3

S/N: 00371

1x Emka Switching Unit

S/N: No serial number

1x Haake DC10 Circulator

Type: 003-2859

S/N: 1WDIN12879

Perkin Elmer Janus Automated Workstation With Accessories Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on.

WinPrep software is available for setup with a PC upon customer request.

Also included:

1 x Perkin Elmer Peri Pump

1 x Perkin Elmer Vaspian Arm

2 x Waste Bottles

This Beckman Coulter BIOMEK FX Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.

The system is in full working order and was used until very recently.

Included in the system are;

The system units are in good cosmetic condition.

The system consists of the following units:

Biomek FX robotic liquid handler

Serial No. 5012580

24 plate position bed

Fitted with light curtain, two robotic heads, tip changer, Variomag Teleshake

Biomek FX Device Controller

Serial No. 4000A51063

Thermo Electron Microplate Hotel

Serial No. 40578218

With 9 x Cytomat P23 towers and 2 x Cytomat P69 towers

Cole Parmer Masterflex Console Drive with twin head bi-directional

Model 7520-c7

Cole Parmer Masterflex L/S Economy Drive with twin head

ThinkCentre PC running Windows 7 Professional and installed with Biomek Software Version 4.1

Serial No. 1S1OAGS11D00MJ0345JQ

View Sonic 17" Monitor

Model VS14768

Serial No. TT1152621348

Lenovo keyboard

Model KU-0225

Serial No. SN8134833

Lenovo mouse

Serial No. 44HM285

ALP 74cm conveyer with Microscan MS-710 barcode scanner

Serial No. FIS-0710-0010

Variomag Teleshake plate shaker with power supply

Beckman Coulter Accuframe positioner

Passed a PAT test on 11.06.24

Included:

2 x Biomek FX start-up training manuals

2 x hoses for Masterflex pumps

8 x data cables

8 x Plexiglass screen panels

10 x 719301-AA Fixed Tip Kit

8 x Ferrite cable noise screening block

5 x work bed fittings

4 x airline connectors

2 x 10 litre plastic Nalgene solvent bottles

Beckman Coulter Biomek FX Robotic Automated Liquid Handling System

This was removed from a university lab where it was surplus to requirements.

The unit has been tested and is in good working order. The tiploader has been tested with a jun-air compressor which is not included in the sale.

The system includes a Dell Optiplex 380 running Windows XP. It has various software installed including Beckman Coulter Biomek 3.3 (Build 14)

This allows control of the Biomek FX robot. The other PC contains no Biomek software. The SATA HDD contains an old version of the Biomek software running on Windows NT.

Also Included with it are;

Stone PC - No software

Boxed Hard Drive

NEC 19" Monitor

Microsoft Keyboard

HP Mouse

Beckman Coulter Integrated Solutions CD

Perkin Elmer Janus G3 Workstation

This system was removed from a university lab where it was surplus to requirements.

The system is in good used condition, with various marks and signs of general use. Some of the VariSpan tips are slightly bent and will require replacement. The PC has WinPrep 4.9 software installed.

The robot was initialized and successfully passed an XY random 100 move test with no errors.

System consists of:

• Perkin Elmer Janus AJM8001/T Liquid Handler
• Equipped with Varispan 8 Tip Arm

• Perkin Elmer Peri Pump

• Lenovo ThinkCentre PC with keyboard, mouse, monitor, and barcode scanner
• Running Windows 7
• Perkin Elmer WinPrep 4.9 software installed (software CDs included)

• Riello UPS

• Janus Printed User Manual

Accessories included:

• 16 x Spare Tips
• 16 x Spare Tecan 20734804 Cavro Syringes
• 5 x Waste Bottles
• Various other small parts, spares, and consumables

This item is new in stock. Please enquire for further details.

Perkin Elmer Janus AJM4G01 Standard Platform 4Tip & Gripper

This system was removed from a university laboratory where it was surplus to requirements.

The unit is in good used cosmetic condition. It powers on, initializes correctly, and has passed a random movement test. A video demonstrating its operation is available.

Further testing could not be conducted at our facility.

This system comprises the following:

• Perkin Elmer Janus with Varispan Arm & Gripper
• Part No: AJM4G01/AG
• Serial No: JA1616N1577
• Decks: 5084305 & 5086759
• Capacity: 24 tiles
• Perkin Elmer Peri Pump with Nalgene bottle
• Lenovo PC system including a keyboard, monitor, and mouse, running Windows 7 with Perkin Elmer Winprep software v4.10.0.54
• Full manual set
• Various software discs
• Numerous microplate holders
• Various parts for the waste system

Includes transport blocks for safe transport.

This item is new in stock. Please enquire for further details.

Art Robbins Instruments Phoenix/RE Model-600-1010-00 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner has notified us that the needle requires replacement.

This item includes:

• Phoenix/RE
• DeeracFluidics Spot On
• Melcor Thermoelectric Temperature Controller MTTC1410
• Various Cables and Wires

This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university lab where it was surplus to requirements.

All units are in good used cosmetic condition but they do have various signs of general use.

The system consists of:

1 x Beckman Coulter Biomek Fxp CAT No A31842.

The unit powers up and both lights illuminate Green. It was not tested any further.

The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included.

1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.

It comes with:

2 x Stacker 10 hotels.

2 x FX Stacker 10 hotels.

1 x Stacker Carousel Pendant.

The mounting plate to connect it to the Fxp is included.

It also comes with a spare Microscan, operational condition is unknown.

1 x Lenovo PC with monitor, mouse & keyboard.

It has the Biomek Version 3.3 software installed.

1 x Jun-Air 1795001 Compressor.

The system also includes quite a few plates and consumables and various connection cables.

Thermo Scientific Versette Automated Liquid Handler

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, with 2 noticeable cracks present.

This item powers on, we are unable to conduct further testing at our facility.

This item was last serviced by a Thermo Scientific Engineer in April 2022.

Beckman Coulter Biomek FXP Laboratory Automation Workstation

This was removed from a university lab where it was surplus to requirements.

The system has been tested and is in good working order. The tiploader was tested with a compressor (not included).

The software is installed on the PC and communicates with the system well.

Included are;

PC/Accessories:-

Dell Optiplex 380

Iiyama Prolite B2282HS

Dell PC & Mouse

Starview 4 Port USB 2.0 KVM Switch

Lots of cables (USB, Ethernet, RS232)

Other Parts:-

Beckman Coulter FX Device Controller Model - 717635

Inheco TEC Control 96

SN - 958

Powers on

Cole Parmer MasterFlex Console Drive

Model - 7520-67

SN - G07004011

Powers on

Spare Beckman Coulter AccuFrame

SPRIplate 96 - Ring (AGN - 000322)

Removable Gripper Rod (REF-394069)

4 x Spare plates

2 x Nalgene 2Gal Bottles

Box of spare plate stands

Consumables included:-

1 x Box - Greiner bio-one Cellstar 48 Well Cell Culture Plates Qty - 100

1 x Box - Beckman Coulter Biomek AP96 P250 Pipette Tips Qty - 10 Racks

2 x Boxes - Beckman Coulter P250 Tips, SPAN 8 Sterile Bar Qty - 5 Packs per box, 10 Racks per pack

1 x Box - Beckman Coulter P250 Tip, Sterile Barrier Qty - 5 packs

3 x Packs - Starlab 500ul, 96 Well assay plate Qty - 27 (2 packs of 10/1 pack of 7)

3 x Packs - Costar 3960 2ml Assembly Blocks Qty - 15

4 x Packs - Unknown Packs - Qty 20

1 x Box - Beckman SPAN 8 Tube Tool Kit

Thermo Matrix PlateMate Plus Automated Liquid Handling System

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

The unit communicates with the PC and appears to be in working order.

It is in good cosmetic condition with a small chip in the casing.

Included with it are;

LG 24" Monitor

Thinkcentre PC

Lenovo Keyboard & Mouse

PC Password Letmein01

Software installed:-

Matrix ControlMate V1.3.38

Accessories:-

Control Panel

Nalgene 10L Bottle

3 x Packs of Matric D.A.R.T.s Disposable Automation Research Tips 30ul (1 sealed,2 opened)

96 well 30ul head.

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with marks from use. All modules power up.

We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes.

The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working.

The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal.

We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts.

The system is made up of the following;

1 x Matrix Hydra II

Cat no. 109610

1 x Matrix 2 Position Stage

1 x Apogent Discoveries Matix Hydro Pump Module

The unit powers on with all 3 Fills working.

1 x Matrix P1 Control Box

1 x Innovadyne 1-Channel Nanofill

The unit powers up.

1 x Grant Instruments Type MS1

The unit powers up.

Dell Laptop with Microsoft Mouse

Model - PP04X

Hydra II-Plus-One Control Software Version 3.1.3 Installed

The unit powers up and the software runs.

Software Discs:

Matrix Hydra II-Plus-One Control Software Version 3.1.3

Matrix Hydra II-Plus-One Control Software Version 3.1.2

SuperLogics LE Software Suite Rev 2.9

2 x Socket Installation discs

Various tubing and accessories

Operating instructions

Amersham Biosciences Ettan Spotter, Various Parts & Accessories

This was removed from a university lab where it was surplus to requirements.

The unit has been tested and works well.

A Windows XP PC with Ettan Digester software is included.

It is in good cosmetic condition with minor marks

Included are;

Pre-Cut Aluminium Foil Microplate Sealers - Code#: 676003 x 2

215 Utility Programs

Ettan Spotter Test Procedure

Ettan Spotter Instrument Handbook

Ettan Spotter User Manual

Ettan Spotter Safety Handbook

Ettan Digester Control Software 1.10

Calibration Plate

Calibration Tool

Distance Tool

215 Level Sensor Cable Assy

Fuse, 2.5 amp T-2.5

Clip, Extruded Cable/Tubing

Fuse Drawer 110/120V

Coupling 1/4-28, PVDF

Shielded Gsioc Cable 30"



Beckman Coulter Biomek NXp Laboratory Automation Workstation

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition with some surface wear. According to the previous owner, the system is fully operational but was sold due to lack of use and space constraints.

This Biomek NXp was serviced in December 2023

Specifications:

• Model: Biomek NXp
• Serial No.: A318400876

Additional Components:

• DFMZ Design Filtration Microzone
• Model: DA1-1x2-2
• Serial No.: 952213

Accessories Included:

• Insert Pak 11mm Non-Sterile (Serial No.: 3364)
• 2 x Top Plate, Multi-Config Peltier ALP (Part No.: A32165 REV AA)
• 15 x Reservoirs, 75 ml, Case Sterile (Lot: P61122MPI)
• Physical Manual: Version 3.3 Tutorial

This Tecan Genesis RSP 100 was removed from a university lab where it was surplus to requirements.

The unit has been tested and is in working order. We were able to control it with the included software. Some of the tips are however bent and will need replacing before the system will work properly.

It is in good cosmetic condition with minor marks from use.

It comes with:-

Novatech PC with Tecan Software -

Gemini Robotic Procedure Design Version 4.1.0.0

We have the passwords for the software and they will be provided on purchase.

Tecan Unit Dimensions - L105 x W78 x H103cm

Beckman Coulter BioMek NXp Laboratory Automation System Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up.

The system includes the following:

• Software
• PC and monitor
• Manual
• 40 x boxes of 10 racks of P20 pipette tips
• 8 boxes of 10 racks of P250 pipette tips
• 1 x Biomek valve Unit
• 1 x Inheco TEC Control 96/RS232
• 1 x Biomek Modular Reservoir Quarter Module 40mL Capacity (48 reservoirs)
• 1 x Biomek Modular Reservoir Half Module 75mL Capacity (24 reservoirs)
• Box of tubing
• Box of spare parts and accessories
• 1 x light curtain test rod

Corbett Robotics CAS-1200 Liquid Handling System

This item was removed from a university laboratory where it was surplus to requirements.

The system powers on and is in good cosmetic condition.

Includes:

• Manual
• Model: CAS-1200

Beckman Coulter Biomek 4000 Automated Laboratory Workstation

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It was serviced in 2022 and has not been used since.

It is in excellent cosmetic condition with marks from use.

PC & Accessories:-

Lenovo ThinkCentre PC

ViewSonic 21.5" Monitor

Dell Keyboard & Mouse

PC has Biomek Software Version 4.1

Comes with a box of spare parts including cables, blocks and adaptor plates.

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.

Everything powers up and the system is in good cosmetic condition with some marks from use.

There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code

'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100)

We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well.

This error makes it impossible to home the system. So it could not be tested any further.

The system comprises of;

1 x Beckman Coulter Biomek NXp Laboratory Automation Workstation

Cat no. A31840

Unit dimensions - W77 L92 H98cm

1 x IBM ThinkCentre PC

MT-M 8113-DA1

Biomek Software Version 3.3 installed.

1 x Lenovo Monitor

Type - 9227-AC1

1 x Lenovo Keyboard

1 x IBM Mouse

2 x Nalgene 2 Gallon Waste/Supply Bottles

Box of Accessories:-

Beckman Coulter AccuFrame

Beckman Coulter Vacuum Valve Unit

Power Adaptor

Various cables

8 x 2ml Tube holders (24 tube slots in each)

94 x 2ml tubes

Vacuum Manifold Base

23mm Spacer Collar PN 719751

36mm Collar

3 x Thermo Scientific 96 well 0.2ml plates.

This Tecan Genesis RSP 100 Liquid Handling System with 2200 new 1000ul Tips was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition, we cannot test it further at our facility as it requires connection to a PC with relevant software installed.

Includes the following:

1 x case of 96 Tecan Series Disposable Tips order No. 612 512.1

1 x Gemini Software Manual V3.10

1 x Tecan EVOware Training handbook

1 x Gemini Software Training Course booklet

1 x Genesis RSP Operating Manual

1 x Genesis Instruments Setup and Service Manual V4.1

Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up but was not tested further as there is no software with it.

It is in good cosmetic condition with minor marks.

Included with it are;

1x PC connection cable

1x Spare mounting plate

1x Bioworks opertating system manual

1x Bioworks version 1.4 release notes

1x Biomek 2000 user manual

1x Biomek 2000 quick start guide

1x Biomek 2000 installation and maintenance guide

1x Beckman plus tutorial

This Beckman Coulter Biomek 2000 Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.

The item powers on but is unable to be tested further without software.

The item is in a reasonable, used cosmetic condition with marks and scuffs.

It comes with a sealed box of Beckman P 20 Pipette Tips (20ul)

This Beckman Coulter Biomek 4000 High Precision Liquid Handling System was removed from a university lab where it was surplus to requirements.

All the units are in very good used cosmetic condition but they do have various signs of general use.

The system has been powered up and connected to the PC. We were able to get the head to go to the home position and all of the bays using the Biomek 4.1 software. It seems to be working as intended.

The lab also said it was fully operational prior to removal.

The system consists of:

1 x Beckman Coulter Biomek 4000 Main Unit.

1 x Beckman Coulter P200L Tool 1-Tip.

1 x Beckman Coulter P20 Tool 1-Tip.

1 x Beckman Coulter MP20 Tool 8-Tip.

1 x Beckman Coulter P/N 609119 5 Tool, Tool rack.

1 x Lenovo PC with Keyboard, LG Monitor and Dell Wireless Mouse.

The PC contains Biomek 4.1 software.

Various cables to connect the system up.

This PrimaDiag ACSIA Line Automated Platform Liquid Handling Robot was removed from a university lab where it was surplus to requirements.

This unit is in excellent condition and comes with original PC and software.

Included are;

1 x Primadiag ACSIA Robot.

1 x Dell Precision Tower 3620.

It does not include a monitor, mouse or keyboard.

The PC has Prima Controller II software for the robot and SQ Lite 2009 Pro installed.

1 x Box of accessories which includes:

4 x 60421 TipsHolder ACSIA250.

2 x Dell Windows 10 discs (Windows 7 is installed on PC).

1 x Tool pack.

1 x Primadiag training paperwork.

Various microplates.

This item is new in stock. Please enquire for further details.