Floor Standing Centrifuges
Items 1 to 28 of 28
£ 10,000.00 (ex. VAT) 1 in stock
Beckman Optima XL100K Ultracentrifuge w/ Sorvall AH-629 & RPS40T-832 Lab
ITEM-41835
Beckman Optima XL100K Ultracentrifuge Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
Also includes the following:
Sorvall AH-629 Rotor
RPS40T-832 Rotor
Neither rotor includes the vial buckets.
£ 9,850.00 (ex. VAT) 1 in stock
Beckman Optima XL-100K Ultracentrifuge & 70 ti Rotor Lab
ITEM-37205
Beckman Optima XL-100K Ultracentrifuge Lab
CAT no. 365669
Serial no. COX97D02
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order when tested on-site, the previous client has also stated it was in working order prior to removal.
There is no rotor included.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 8,000.00 (ex. VAT) 1 in stock
Cepa Z-41 High Speed Centrifuge
ITEM-41154
Cepa Z-41 High Speed Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order. It runs on a timer delay so takes a few moments to start working.
It is in good cosmetic condition.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 4,550.00 (ex. VAT) 1 in stock
Beckman Coulter Optima L-90K Ultracentrifuge Lab
ITEM-35051
Beckman Coulter Optima L-90K Ultracentrifuge
This was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in good working order. A full report is available on request.
It is in good cosmetic condition with minor marks.
£ 4,500.00 (ex. VAT) 1 in stock
Sorvall Evolution RC Floor Standing Centrifuge w/ Sorvall SLA-1500 Lab
ITEM-45551
Sorvall Evolution RC Floor Standing Centrifuge w/ Sorvall SLA-1500 Super-Lite Autoclavable Rotor
This item was removed from a university laboratory where it was surplus to requirements.
The centrifuge powers on and is in good cosmetic condition. Temperature and RPM testing were conducted successfully.
Temperature Testing :
- Set to -20.0ºC, stabilized at -18.0ºC
- Set to 37.0ºC, stabilized at 37.0ºC
- Set to 40.0ºC (max), stabilized at 40.0ºC
RPM Testing:
- Held steady at 15,000 RPM
Included Rotor:
- Sorvall SLA-1500 Super-Lite Autoclavable Rotor (max 121ºC)
- In good cosmetic condition
£ 3,820.00 (ex. VAT) 1 in stock
Beckman Coulter Avanti J-E Centrifuge
ITEM-35784
This Beckman Coulter Avanti J-E Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up but we were unable to test it further as we do not have a compatible rotor in stock. We think it requires a rotor with a magnet fitted.
It is in good cosmetic condition with minor marks.
£ 3,500.00 (ex. VAT) 1 in stock
Beckman Coulter Avanti J-20 XP Floor Standing Centrifuge Lab
ITEM-46284
Beckman Coulter Avanti J-20 XP Floor Standing Centrifuge Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, and in complete working order.
This item was tested to 14,000rpm with a JA14 rotor (not included)
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 3,000.00 (ex. VAT) 1 in stock
Beckman Coulter Optima LE-80K Ultracentrifuge Lab
ITEM-24728
Beckman Coulter Optima LE-80K Ultracentrifuge
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in generally good condition, despite some staining mainly on the sides and a few very small dents inside the chamber, which do not affect its operation.
The unit has been serviced, equipped with a refurbished vacuum pump, and has successfully passed all operational tests.
The full serviced report is available on request.
Includes:
- Foot plates
- Manual
£ 3,000.00 (ex. VAT) 1 in stock
Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab
ITEM-37194
Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, it has been tested at 70,000rpm using a Beckman 70.1Ti rotor.
The rotor is not included.
£ 3,000.00 (ex. VAT) 1 in stock
Beckman Coulter Optima LE-80K Ultracentrifuge with Rotor Lab
ITEM-36506
This Beckman Coulter Optima LE-80K Ultracentrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks.
Included with it are;
1x Beckman Coulter 6 bucket SW 28 Rotor
Max RPM: 28000
6x Beckman Coulter SW 28 swinging buckets/50 ml tube adapter
1x Beckman Coulter rotor bag
4x Boxes of Beckman Coulter Pollyallomer Centrifuge Tubes 14 x 89 mm
2x Boxes of Beckman Coulter Ultra-Clear Centrifuge Tubes 25 x 89 mm
1x Beckman Coulter Spincote Lubricant
1x Beckman Coulter Silicone Vacuum Grease
1x Beckman Coulter Release tool
1x Beckman Coulter Rotor Safety Manual
1x Beckman Coulter Rotors and Tubes instruction CD
£ 2,490.00 (ex. VAT) 1 in stock
Beckman Coulter Avanti J-25 Centrifuge Lab
ITEM-41342
Beckman Coulter Avanti J-25 Centrifuge Lab
This was removed from a lab where it was surplus to requirements.
The unit has been tested and is in full working order up to 18,000 RPM.
It is in good cosmetic condition internally and externally.
This item has been tested using an in-house JA 18.1 rotor, not included.
£ POA 1 in stock
Sorvall Discovery M150 SE Centrifuge w/ S140-AT Fixed Angle Titanium Rotor Lab
ITEM-44516
This item is new in stock. Please enquire for further details.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,250.00 (ex. VAT) 1 in stock
Sorvall Discovery 100SE Refrigerated Floor Standing Centrifuge Lab Spares/Repair
ITEM-29790
Sorvall Discovery 100SE
This was removed from a university lab where it was surplus to requirements.
The unit is missing the power switch and the cable is split. It looks like some other parts have been removed and cables have been disconnected inside.
It is in otherwise reasonable cosmetic condition with minor marks from use. The rear panel is showing signs of damage.
It is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,185.00 (ex. VAT) 1 in stock
Beckman Coulter Avanti J-E Centrifuge Lab Spares/Repairs
ITEM-29745
Beckman Coulter Avanti J-E Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has several faults. The unit requires a new board, flash card and cooling system.
It is in good cosmeti condition with minor marks.
It is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Beckman Coulter Avanti J-HC Centrifuge Lab Spares/Repairs
ITEM-31551
Beckman Coulter Avanti J-HC Centrifuge
This item was removed from a university lab where it was surplus to requirements.
The centrifuge is in good cosmetic condition and powers on. However, due to an imbalance issue, no further testing could be conducted.
The spindle is bent.
Therefore, it is listed as Spares/Repair.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 900.00 (ex. VAT) 1 in stock
Beckman Refrigerated Centrifuge Spares/Repairs Lab
ITEM-37628
Beckman L7-65 Refrigerated Centrifuge L7-65R
This was removed from a university lab where it was surplus to requirements.
The unit powers up and will run to 1500rpm, but it cannot create a sufficient vacuum to run at higher speeds.
For this reason it is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Thermo Scientific Sorvall Discovery M120 SE Centrifuge Spares/Repairs
ITEM-35813
This was removed from a university lab where it was surplus to requirements
THe unit powers up but shows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal.
It is sold for spares/repairs.
No rotor included.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Sorvall RC-5C+ Plus Floorstanding Centrifuge Lab Spares/Repairs
ITEM-41038
This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs.
Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Sorvall OTD-COMBI Ultracentrifuge w/ Sorvall T-865.1 Rotor Spares/Repair Lab
ITEM-41834
Sorvall OTD-COMBI Ultracentrifuge Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition and powers on. However, the door unlock switch is non-functional, therefore, preventing the unit's ability to lock or open the door.
We were able to open it manually, but the automatic door open function is faulty.
Therefore, it is listed as Spares/Repair.
Also includes the following:
Dupont Instruments Sorvall T-865.1 Rotor.
Serial No: 9330329.
8 Hole rotor.
Tube dimensions: 1.5cm x 8cm.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 700.00 (ex. VAT) 1 in stock
Beckman L8-60MR Ultracentrifuge Lab Spares/Repairs
ITEM-39709
Beckman L8-60MR Ultracentrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up and was tested with a Beckman 70.1 Ti rotor from another item (Not included), but would not reach over 3000rpm (Rotor max is 10000). We suspect there is a vacuum issue as the vacuum light flashed red during testing. The system also will not cool down.
It is in otherwise good cosmetic condition.
It is sold for spares/repairs.
Beckman L8-60MR Ultracentrifuge
Model: L8-60MR
Serial#: 6H816
Year: 1988
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 700.00 (ex. VAT) 1 in stock
Beckman Centrifuge Model - J2-21 with JA-10 10000rpm Rotor Lab
ITEM-26288
This Beckman Centrifuge Model - J2-21 Cat no. 341737 with JA-10 10000rpm Rotor was removed from a university lab where it was surplus to requirements.
The centrifuge has been professionally serviced and is in full working order. There is a full report available on request.
Included are manuals for the centrifuge & rotor along with some O-Rings for the JA-10.
Rotor Type - JA-10
SN - E 20994
6 X 500ml Slots
£ 700.00 (ex. VAT) 1 in stock
Beckman J2-21 Floor Standing Centrifuge with JA10 10000rpm Rotor Lab
ITEM-32037
Beckman J2-21 Floor Standing Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. It is in good cosmetic condition with only minor marks from use.
Included are;
Beckman J2 - 21 Centrifuge
Cat no. 341737
SN - E948
Rotor Type - JA 10
SN - 17342
10,000rpm Max
Hold 6 x Buckets 7cm diameter
£ 700.00 (ex. VAT) 1 in stock
BECKMAN Model J2-21 Floor Standing Centrifuge Lab
ITEM-21249
This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus to requirements.
The unit is in full working order but is not supplied with a rotor.
It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 600.00 (ex. VAT) 1 in stock
Beckman Optima L-60 Floor Standing Centrifuge Lab Spares/Repairs
ITEM-42198
Beckman Optima L-60 Floor Standing Centrifuge
This item was removed from a university lab where it was surplus to requirements.
The centrifuge powers on and is in good cosmetic condition.
However, during testing, the display read the following message:
"DRIVE", preventing it from running a cycle.
Therefore, it is listed as Spares/Repair.
There is no rotor included.
Specifications:
- Speed: 1,000 - 60,000 rpm
- Temperature: 0˚C - 40˚C
Model: Optima L-60
Serial No.: L1M602
Rotational Counter: 417,132 x 10,000 rotations
£ POA 1 in stock
Sorvall RC 6+ Floor Standing Centrifuge Lab
ITEM-37323
This item is new in stock. Please enquire for further details.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Beckman L8-80MW Ultracentrifuge Lab
ITEM-44394
Beckman L8-80 Ultracentrifuge Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition externally and powers on, however, when tested we attempted to run the unit with a 70Ti rotor (not included), but encountered cooling system and speed sensor errors.
Also, oil was discovered under the rotor and in the chamber/motor area, possibly due to a worn seal.
Due to the above faults, this item is listed as Spares/Repair.
The 3-phase plug has been removed and there is no rotor included in the sale.
Also included:
1 x Operation Key
1 x Original User Manual
£ POA 1 in stock
Beckman Coulter Optima L-80 XP Ultra Centrifuge Lab
ITEM-37218
Beckman Coulter Optima L-80XP
This item was removed from a university laboratory where it was surplus to requirements.
The unit was tested at the rotor maximum of 32,000 rpm, reaching this speed quickly and without issue.
Temperature testing confirmed stable operation, achieving both the minimum temperature of 0ºC and 37ºC as expected.
In good cosmetic and mechanical condition, with verified speed and temperature control functions.
Includes:
- Tested with rotor model SW 32 Ti (Not included)
Specifications.
- Model: Optima L-80XP
- Serial No.: LXP11H01
£ POA 1 in stock
Beckman J2-21 Floor Standing Refrigerated Centrifuge Lab
ITEM-42420
This item is new in stock. Please enquire for further details.
Items 1 to 28 of 28