Freeze Dryers
Items 1 to 7 of 7

£ 3,700.00 (ex. VAT) 1 in stock
Christ Alpha 2-4 LD Freeze Drier Type 101042 Lab
ITEM-31951
This Christ Alpha 2-4 LD Freeze Drier Type 101042 was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good working order. The vacuum pump we are told is 16 years old but is functional.
It is in good cosmetic condition with minor marks from use.
Christ Freeze Drier
Model - Alpha 2-4 LD
Type - 101042
SN - 11075
Vacubrand Rotary Vane Vacuum Pump
Model - RZ 2.5
SN - 31473411
It comes with Vacubrand Pump Oil (1L)

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 3,235.00 (ex. VAT) 1 in stock
Virtis Model 2KBTES-55 Freeze Dryer Drier & Accessories Lab
ITEM-25207
This Virtis Model 2KBTES-55 Freeze Dryer & Accessories was removed from a university lab where it was surplus to requirements.
The system has been tested under a vacuum using a 2-Stage Edwards Rotary Pump (Not included). It can achieve 190mtorr and -40˚C within 30 minutes. The seals are in very good condition.
The university reported it to be fully working.
Accessories:
1x Plastic Vertical Drum Manifold
1x Metal 3x tier tray
1x Drainage hose (clear tubing)
1x Rubber hose
2x rubber seals

£ 1,875.00 (ex. VAT) 1 in stock
Girovac Savant Micro Modulyo Freeze Dryer Lab
ITEM-19385
This Girovac Savant Micro Modulyo Freeze Dryer was removed from a university lab where it was surplus to requirements.
The unit powers up and the temperature dropped to -50˚C after about 4 hours. It was not tested further. As service engineer tested it under a vacuum and recertified it as fully working. Please note, none of the testing equipment is included in the sale.
It is in reasonably good cosmetic condition with some marks from use.

£ 1,585.00 (ex. VAT) 1 in stock
EC Apparatus Modulyo Laboratory Freeze Drier Lab
ITEM-30232
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition with only minor marks from use.
We had this inspected by a qualified service engineer. There is a blockage in the pipe leading to the gauge, so it is not measuring the real pressure. They have tested the gauge and the controller, and they both working fine. The system holds a vacuum but no change in the gauge controller needle due to the blockage.
The temperature drops to -60C within 15-20 minutes short time.
The mains switch is stuck on (On) and has to be switched off from the mains.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Edwards Freeze Dryer Modulyo Lab Spares/Repairs
ITEM-35472
This Edwards Freeze Dryer Modulyo was removed from a university lab where it was surplus to requirements.
The unit powered up, and we covered the chamber with a lid from another unit, but did not cool down at all.
It is in good cosmetic condition with minor marks from use.
It is sold for spares/repairs.

£ 1,000.00 (ex. VAT) 1 in stock
Edwards Modulyo K4 Freeze Dryer Lab
ITEM-34744
Edwards Modulyo K4 Freeze Dryer
This was removed from a university lab where it was surplus to requirements.
The unit powers up and looks to be in working order. We were unable to get a true measure of the cooling system as the top part of the drum was missing.
It is in good cosmetic condition with marks from use.
Internal dimensions are: L 12.5cm x W 12.5cm x H 27cm.

£ 415.00 (ex. VAT) 1 in stock
Thermo Savant RVT400 Refrigerated Vapor Trap Model: RVT400-230 Lab
ITEM-20581
This Thermo Savant RVT400 Refrigerated Vapor Trap Model: RVT400-230 was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition but it has marks and stains from use.
We used a lid from another unit to test it. Please note, the lid is not included.
We tested the temperature with a digital thermometer (not included). With the lid in place the temperature dropped to -49.5˚C.
Items 1 to 7 of 7