Olympus Fluoview FV1200 Confocal Microscope IX83 with Laser System & Accessories

This was removed from a university lab where it was surplus to requirements.

The system is in full working order. It is in excellent cosmetic condition with minor marks.

Included are;

Model- FV1200

-IX83 microscope stand

-Main scanner and SIM scanner (the latter can be used to bleach or ablate while truly simultaneously imaging with the main scanner)

-2x spectral detectors and 1x PMT. Spectral detectors can be tuned to detect between 400 and 800 nm. Bandwidth can be set between 1nm and 100nm.

-2x HSD High sensitivity GaAsP detectors.

-Tokai-Hit stage top incubation system with stage adapters for dish and slide format specimens.

-Motorised Prior Scientific stage.

-Metal halide lamp for wide-field epifluorescence.

Lasers (main scanner light path for imaging)

-405 diode

-Argon with lines at 458, 488 and 515 nm

-559 nm DPSS

-635 nm diode

Lasers (SIM scanner for bleaching/ablation and imaging)

-Pulsed PicoQuant 405

-440 nm diode (can be used for imaging CFP

Objectives:

-10x   air UPLSAPO10X2 NA 0.4

-20x   air UPLSAPO20X NA 0.75

-40x   oil UPLFN40X0 NA 1.3

-60x   oil PLAPON60X0SC2 NA 1.4

-60x   silicone oil UPLSAPO60XS 1.3

-30x   silicone oil UPLSAPO30XS 1.05

Leica CTR 6000 TCS SP5 Laser Scanning Confocal Microscope

This system was removed from a laboratory where it was surplus to requirements.

The system powers on, with all units functional, including the stage and light sources.

According to the previous owner, the system features a Leica SP5 confocal with 3 PMT and 2 hybrid detectors, along with an FCCS system that includes 2 SPAD detectors. The filters for the detectors are beginning to delaminate and will need replacing. The SP5 computer is relatively new and has been updated to Windows 10. A full environmental chamber for temperature and CO2 control is also included.

The system consists of:

1. TCS SP5 Control Desk, Microscope, and Scan Unit (Serial No. 510000038, Year: 2007)
2. Leica CTR 6000 Controller (Serial No. 280210)
3. Leica CMS Detection Unit (Part No. BS054407)
4. Leica APD Detection (Serial No. 65031)
5. Leica Scan Head/Trigger Box (Serial No. 0051)
6. Leica Switch Console V3 (Serial No. 0028960)
7. Leica Cooling Fan and Flexible Duct (Part No. 1531229001)
8. Leica Mercury Lamp Box (Type 11307072071/BZ)
9. LEJ Mercury Bulb Controller (Type ebq 100mc-L, Serial No. 06 2380802161, 217 hours bulb run time)
10. Leica Stage Controller (Part No. 11505180)
11. The Box polycarbonate microscope enclosure
12. The Cube CB02A Enclosure Heater with probe (Serial No. 10585)
13. The Brick Air Humidity and CO2 Regulator (Serial No. 10654)
14. Gecomp PC running Windows XP Pro (Serial No. 071362)
15. HP Z4 PC running Windows 10 (Serial No. CZC026C55L, Product No. 1JP11AV)
16. 2 x NEC 1990SXi Monitors (Serial Nos. 6Z009731YB, 6Y008209YB)
17. Cherry Keyboard (Model MY 3000 USB, Serial No. G0006934)
18. HP KB-1469 Keyboard (Serial No. 803180-L31)
19. 2 x HP Mice (Part Nos. 672651-001, 458407-002)

The microscope is fitted with five objectives:

1. Leica 784 HCX PL APO 100x/1.4-0.7 oil cs
2. Leica 510 HCX PL APO 63x/1.4-0.6 oil cs
3. Leica 214 HCX PL APO 20x/0.70 1MM corr bl
4. Leica 506251 HCX PL APO 40x/1.25-0.75 oil
5. Leica 506279 HCX PL APO 63x/1.2 W corr cs

Additional components:

1. Twin binocular eyepieces HC PLAN s 10x/125 M
2. 7 x colour filter and mirror blocks, 2 x filter block covers
3. 12 x stage parts
4. 1 x humidity water cylinder for The Brick

Included Software & Manuals:

1. Leica Software Discs: Confocal Software v. 2.585 (2x), LAS AF v. 2.73-9723, SP5 WS Premium Recovery, SP5 SP8 Standard G4 Recovery W10, SP5 Workstation Recovery
2. 2 x copies of Windows XP Professional OS
3. Manuals: Newport PR 50 compact high-speed rotation stage, Coherent Sapphire 488-20 & 410-10 OEM Laser, The Brick operating manual, The Cube 2 temperature controller manual

This item is new in stock. Please enquire for further details.

Philips XL30SEM Environmental Scanning Electron Microscope ESEM

This is being sold on behalf of a client

The system was in working order about 5 years ago, but has since required a new PC and has not been used.

It is in good cosmetic condition with minor marks from use.

It is currently situated in Durham UK, and is available for collection, but we can likely arrange shipping if needed.

This was removed from a university lab where it was surplus to requirements.

OAI Model J500/VIS Mask Aligner

Model 506&4-072449

Serial No. 1230

Manufacture year 1999

2 x 23cm Javelin Monitors Model BWM9C serial Nos. 97120360, 97120355

2 x JH Technologies microscope lights model LR92240

1 x Optical Associates UV light controller model 4000-104-01 serial No. 570

In very good used condition

The previous owner stated the vacuum chuck that secures the work piece may have some blocked airways from the printing media used.

The system powered on and the 2 optical microscope lights illuminated and displayed an image of the surface of the work platform on the monitors. The extractor fan works well and the UV light illuminated. The microscope moved around smoothly on the mounting slides but could not be moved by the joystick.

It has not been tested further.

This item is new in stock. Please enquire for further details.

This Olympus BX51 WIF Fluorescence Microscope System was removed from a university lab where it was surplus to requirements.

The System unfortunately is largely untested as the lab was unable to part with the PC and software. They implied that it was in working order prior to having the PC removed as it was just surplus to requirements, but there are some parts missing.

Overall it is in good cosmetic condition but has general marks from use.

Details;

1 x Olympus Microscope

Model - BX51WIF

2 x Olympus Eye pieces - WH15X/14

2 x Objectives:-

Olympus LUMPlanFI/IR 40x/0.80 W ∞/0

Olympus Plan N 4x/0.10 ∞/-/FN22

Olympus Lamp

Model U-LH100IR

SN - 6F24822

There is no power supply for the lamp, we used one from another item (not included) to test the light which was working, tested with one of our slides and was able to focus.

Q Imaging optiMOS sCMOS camera

Cooled Mono 16 Bit

SN - Q41501

Lens - Olympus U-CMAD3/Olympus U-TV1X-2

Filter - HQ535/50 M 203616

There is no power supply cable for the camera.

Newport RG Breadboard Optics Table

Model - VH3036W-OPT

Dimensions - D76 W90 H80cm

Faraday Cage Dimensions - D78 W88 H90cm

The cage is in reasonable condition but has a few holes.

Table & Cage combined dimensions - D77 W90 H170cm

Scientifica Stage/Platform

Dimensions - D34.5 W60.5 H20.5cm

Power supply for Patch Clamp Micromanipulation System:-

Burleigh PCS-PS60

Powers on

2 x Burleigh PCS 5000 Series Controllers

SN - 0011431 & 0011420

2 x Burleigh PCS 5000 Series Micromanipulators

Burleigh TS - 5000 - 150

Other parts/accessories include:-

Unknown Part SN - 1270

Prior part

Hi-lo Nitrogen 10 Bar gas Regulator

Various small bits including crocodile clips and tubing

ZEISS PALM CombiSystem Axiovert 200M, XE120-XL,HV-D30P w/ Parts & Accessories

This was removed from a university lab where it was surplus to requirements.

The system powers up and the microscope is in good working order. We had some issues controlling the camera and the stage during testing, but this may be due to user error.

With the Palm RoboSoftware V4 we can control the following microscope features:

1. Stage Y Axis movement
2. Stage X Axis movement
3. Objective Motor (able to select objective)
4. Increase/Decrease Light
5. Change Light Source
6. Raise/Lower Objective

It is in excellent cosmetic condition with minor marks.

Included are the following;

Carl Zeiss Axiovert 200M

Model: Axiovert 200M

Serial#: 3820005950

Objectives fitted:

Zeiss Fluar 5x/0.25

Zeiss Fluar 10x/0.50

Zeiss LD Plan-Neoflaur 20x/0.40 Corr

Zeiss LD Plan-Neoflaur 40x/0.60 Corr

Zeiss EC Plan-Neoflaur 63x/1.25 Oil M27

Zeiss EC Plan-Neoflaur 100x/1,30 Oil

Eyepieces:

W-PL 10x/23 (Qty.2)

P.A.L.M Microlaser Technologies

Model: PALM CombiSystem

Serial#: CSC-01010

Date: 2007

Fujitsu Siemens Celsius R630 PC, Fujitsu Siemens SCIENVIEW B17-2 C CI Monitor (QTY.2) Fujitsu Siemens Keyboard, Mouse

Model: Celsius R630

Serial#: YKFU009307

Both Monitors, PC, Keyboard and Mouse are in good cosmetic condition and power on with no issue.

PC has the following software installed:

Palm RoboSoftware V4

Hitachi HV-D30 Camera

Model: HV-D30P

Serial#: 0675280

Laser Quantum LD3000 power supply

Model: Forte

Serial#: 02165

p                                                  

Zeiss CryLaS FTSS 355-50

Serial#: B594C279

Item powers on and is in full working order.

Communicates with control panel and microscope.

EXFO X-Cite Series 120

Model: XE120-XL

Serial#: 0570

Item is in good cosmetic condition.

Item powers on with light source in full working order.

All items listed above are sat on a Melles Griot Optical Table with PALM CombiSystem being fixed to it.

Measurements and weight of Melles Griot Optical Table are as follows:

Dx120Wx90Hx77cm

Weight:

Additional Parts & Accessories:

Zeiss AdhesiveCap 500 Clear

PALM MembraneSlides

PALM CombiSystem C User Manuals

PALM DishHolder 50 C

PALM MultiCap Insert 8c

PALM MultiCap Collector D 8C (Qty.2)

PALM CollectorSet SingleTube II 500

PALM CombiSystem User manual (Qty.2)

PALM RoboSoftware Software Guide (Qty.2)

Laser Quantum Forte Operating Manual

PALM MicroBeam Technical Information

Zeiss Axiovert 200 Operating Manual

Zeiss DuplexDish 50 Sterile Packed (Qty.6)

LumoxTM Dish 50 Hydrophilic, Sterile (Qty.5)

Zeiss MembraneSlide 1.0 Pen

X-Cite In Control Series 120 User's Guide

Zeiss PALM RoboSoftware CD

PALM MicroLaser System RoboSoftware 4.0 CD

Fujitsu Siemens Product Recovery CD

Carl Zeiss 29 Software Release 4.6

Zeiss Axiovert 200 M/Mat Floppy Disc

3-CCD Color Camera Model HV-D30 Operating Manual

Fujitsu Siemens Celsius Drivers & Utilities CD

Scenview B17-2 CI / B19-2 CI

Olympus Lext OLS3100 Confocal Microscope w/ MM6-ASPS Controller & OLS3000 PSU

This was removed from a university lab where it was surplus to requirements.

All parts power on and appear to be in working condition. The control unit and emergency stop button are working correctly. The stage control appears to be working correctly with a smooth motor. Only the cables shown are included.

The system is in good cosmetic condition, but the rubber foot ends are crumbling.

There is no software included with the system.

Items included:

Main Units:

Olympus Lext OLS3100

Dimensions: 464(W)x559(D)x620(H)mm

Weight: 56.5kg

Olympus MM6-ASPS Controller

Dimensions: 381(W)x304.8(D)254(H)mm

Weight: 14.33kg

Olympus OLS3000 Power Supply

Dimensions: 355.6(W)x177.8(D)355.6(H)mm

Weight: 9kg

Accessories:

Olympus U-DICR

Olympus U-P03

Olympus U-AN360-3

Applied Imaging Genetix Ariol SL-50 Vision BioSystems Olympus BX-61 Microscope

This was removed from a university lab where it was surplus to requirements.

The item is in a fairly good used cosmetic condition.

It appears to have some errors. Firstly the BX-UCB controller is showing an Error with CDT, which is the U-UCD8A turret. When switched on the turret makes a horrible noise, sounds like the motor is possibly stuck. We managed to clear the error by connecting the turret from another BX61 we have in stock, but it was removed after testing.

System includes the following:-

Vision BioSysytems

Model - SL50

SN - 0220229

Powers on

Microscope & Fitted Parts:-

Olympus BX61 Microscope

Model - BX61TRF

SN - 8K25329

Olympus Camera

Model - U-CMAD3

U-TV1X-2

Prior Stage

Model - H101AIBX

SN - 70177

Olympus Lamp

Model - U-LH100-3

SN - 8H23231

EXFO Collimating Adaptor

810-00032

SN - DH0583

2 x Olympus Eye Pieces - WHN10X-H/22

Olympus Objectives:-

UPlanFL N 10x/0.30 ∞/-/FN26.5

MPlanFL N 5x/0.15 ∞/-/FN26.5

UPlanFL N 60x/0.90 ∞/0.11-0.23/FN26.5

UPlanFL N 20x/0.50 ∞/0.17/FN26.5

UPlanFL N 40x/0.75 ∞/0.17/FN26.5

PlanApo N 1.25x/0.04 ∞/-/FN26.5

Other Units:-

Olympus Microscope Controller

Model - BX-UCB

SN - 8E14044

Powers on

Olympus Hand Switch

Model - U-HSTR2

SN - 8K22255

EXFO X-Cite Series 120PC Q Light Source

Model - XI120PC-Q

SN - XI120PC-Q-0283

Powers on

Prior Proscan II

Model - H30XYZ2AP

SN - 08439

Powers on

USB Joystick Controller (No Brand or Serial numbers)

PC Parts/Software:-

HP Applied Imaging PC

HP 24" Monitor

HP Keyboard

Dell Mouse

Applied Imaging Ariol 3.3 CD with Installation Instructions

USB Dongle

Ariol 3.4 Official Release Copied Disc

2 x Panasonic DVD-RAM Back up Discs

Box of various PC cables & IEC leads

Datalogic Gryphon Barcode Scanner & 2 Rolls of Barcodes

Manuals/Guides:-

Genetix Ariol User Manual - Scan, Entry, Review

Genetix Ariol SL-50 Installation

X-Cite Series 120PC Q User Guide

Olympus BX-UCB U-HSTR2 Instructions

Olympus Motorized Reflected Fluorescence System Instructions

Olympus BX61 Instructions

Olympus Camera Adaptor System Instructions

Olympus Motorized Revolving Nosepiece Instructions

Other Parts/Accessories:-

Applied Imaging Calibration Slide A

3 x Chroma Cases of filters

Nikon BE Plan 100x /1.25 Oil ∞/0.17 WD0.14 Objective

5 x Spare Slide Trays

This item is new in stock. Please enquire for further details.

ISI ABT Scanning Electron Microscope (SEM) ABT-55

This was removed from a university lab where it was surplus to requirements. We are told it was in working order prior to being put into storage some time ago

Included are;

ISA ABT 55 Main Control Unit

With 25cm CRT monitor

Control desk with all control switches and buttons

Microscope ABT 55 Unit

Serial No. K244149

Year 1989

Controls for vacuum system, not included

ETP Sempra Robison Detector Head and Control Module

Model PSM-11-4

Serial No. 524

The main units were not powered up due to no plug on the main power supply unit, it was previously hard wired.

The Robinson Detector unit powered on and displayed readiness lights.

Accessories:

5 x used spare copper columns

4 x small aluminium fitting plates

Operators Manual

4 x 15 amp fuses

Filament cartridge

Leica MZ95 Microscope System & K Systems IVF Workstation  L224 LAF

The system has been tested and all modules are in full working order.

Everything is in good cosmetic condition with minor marks from use.

Included are;

K Systems IVF Workstation

Type - L224 LAF

SN - 11100161

Internal workspace - L122 W50 H71cm

Heating function is working.

Microscope:-

Leica MZ95

2 x Leica Eye Pieces 10x/21B (10447160)

Leica Plan 1.0x (10446275)

K Systems Lamp (fitted underneath)

Type - LS14

SN - 11010194

RI IVF Witness Heated Control Unit

SN - 862

RI IVF Witness Box with cables and stand

This Olympus BX45TF Ergonomic Microscope was removed from a university lab where it was surplus to requirements.

The item is in good condition and all dials are fully functional. However, it is missing the left eyepiece rubber cup.

Objectives included:

Olympus UPlanFI - 10x/0.30 ∞/-

Olympus UPlanPL N - 100X/1.30 Oil ∞/0.17/FN26.5

Eyepieces included:

2 x Olympus WH12.5x/16mm

Zeiss Axio Vert.A1 FL Inverted Microscope

This system was removed from a university lab where it was surplus to requirements.

The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted.

The instrument is configured as follows:

1. 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000)
2. Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination
3. Reflector modules: DAPI, FITC, TRITC, empty

1. 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000)
2. Position 1: empty
3. Position 2: 424228-9060 0.05T Neutral density filter 0.05
4. Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55
5. Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55
6. Position 5: empty

1. 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000)

1. 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000)

1. 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23

1. 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000)

1. 1 x Camera adapter 60N-C 2/3" 0.5x (426112)

1. 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00)

1. 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000)

1. Object guide M, 130x85mm, for Axio Vert (432333-9040-000)

1. 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

Zeiss Axioplan 2 Microscope + LSM 510 Laser Scanning System

This system was removed from a university lab where it was surplus to requirements.

The microscope is in working order, but we have not tested the laser due to safety restrictions at our site.

There are no objectives fitted.

Items included are:

-Zeiss LSM Control S/N- 000260

-Hal 100 Lamp

-Lasos Lasertechnic GMBH S/N- 04041136 M/N- 9600-07

-Zeiss HBO 100W

-Zeiss HBO 100W/2

-Zeiss Lasermodul UV

-Fujitsu Siemans mouse

-Relevant manuals and guides

-Connection cables

-Comms PCi Cards & Dongle (non USB)

This Flir Systems ThermaCam SC500 194 780 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition minor with marks from use, we are unable to test it further at our facility.

Included are the following:

Flir Systems PC Card Interface

P/N: 194 240

S/N: 2030068

HiTRON 13.5 volt Power Supply

M/N: HES61-11B

S/N: 0165

Flir Systems Break Out Box

P/N: 194 257

S/N: 3300066

Singer Instruments MSM System

This item was removed from a university lab where it was surplus to requirements.

The model on the specification plate reads as 300, but the screen indicates a 400 model upon powering up. We believe it was upgraded at some point.

The system appears to be in working condition, with the motorized stage operating via the joystick and communicating with the touchscreen monitor/computer. The camera and light are functional, allowing a clear view of the testing slide on the screen.

The item is in good condition overall, with the exception of a bent piece on the right-hand side (see photo).

Included:

1. Camera: Pixelink PL-B741U
2. 2 x Eye Pieces: HKW 15x/13
3. 2 x Objectives: M20/0.30 240 & 4/0.10
4. All necessary cables, including PSU for the monitor

Olympus BX61 Microscope With BX-UCB And U-HSTR2 Control Units

This microscope system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and in good working order.

The items included are as follows:

1 x Olympus BX61 Microscope Model: BX61TRF.

Serial No 7M25426

1 x Olympus BX-UCB.

Serial No. 0D07119

1 x Olympus U-HSTR2.

Serial No. 2E16101

1 x Olympus U-LH100-3 Light Unit

Serial No. 7J12122

2 x Olympus WHN10x/22 Eyepiece.

1 x PlanApo N 60x/1.42 oil /17/FN26.5.

1 x UplanSApo 100x/1.40 oil/17/FN26.5.

1 x UPlanFL N 10x /0.30 /FN26.5.

1 x PlanApo N 1.25 x/0.04 /FN26.5.

2 x data cables

This Hitachi H600 Transmission Electron Microscope was removed from a university lab where it was no longer needed.

It has not been tested but it is in reasonably good condition. It has been completely disassembled for removal.

If you would like images of it in its current state, we would be happy to provide these.

JEOL JSM 840A  SEM Scanning Electron Microscope System

This was removed from a university lab where it was surplus to requirements.

The lab confirmed it was in working order prior to removal, but the control panel was removed and sold separately. It has not been tested at all at our facility but it is in good cosmetic condition with marks from use.

Included are;

Main unit:

1 x JEOL JSM-840A Scanning Microscope

Model: JSM-840A

Serial#: EP130077

Item has attached:

1 x Oxford Instruments 6605

Serial#: 09091-3390-339-521

Power Supply Unit:

JEOL JSM-840A Main Power CSL

Model: JSM-840A Main Power CSL

Serial#: EP130077-40

Also included:

JEOL Pump

Model: N/A

Serial#: N/A

Good cosmetic condition.

Lx36Wx24Hx50cm

JEOL JSM-840A User Manual

JEOL JSM-840A Service Case

This contains:

JEOL Extender MP001569-01

Various washers, fixings, screws etc.

This Hitachi S3000H SEM Scanning Electron Microscope is being sold on behalf of a laboratory. It is surplus to requirements.

The lab informed us that it was working when last used.

The microscope is from 1998, has one SE2 Detector.

Included are the following;

Hitachi S3000H SEM Scanning Electron Microscope Lab

Model: S-3000H

Date: 9/8/12

Part#: 50E-G386

Serial#: 1014-30

System specifications

- 0.3 - 30kV acceleration voltage range

- 5 nm resolution at 25kV in variable pressure mode

- 150mm diameter maximum specimen size

- Dual-bias for low voltage signal noise

- Backscatter mode

Canatron Transformers EN 60742 Transformer

Model: EN 60742

Serial#: CT6699

Hitachi CM751ET Monitor

Model: CM751ET

Serial#: G8E008620

Hitachi CM751ET Monitor

Model: CM751ET

Serial#: T9A 012253

Hitachi S3000H SEM Control Panel

Serial#: 1014-30

Edwards Oil Mist Filter EMF20

Serial#: A 462 29 000

Hitachi Measure Function Setup Disk V 01-05

Serial#: 50E-5497

Hitachi SEM Data Manager Setup Disk V 01-05

Serial#: 50E-5502

Hitachi S-3000Series V 10-16 CD Disc 1 & 2

Serial#: 50E-8108

Hitachi PC-SEM Restore CD Disc 1 & 2

Serial#: 1014-30

Adaptec SCSI Select v2.57.4 Floppy Disk

Serial#: 1492920-00

Adaptec AVA-2915LP/2930LP v1.13 Floppy Disk

Serial#: 1495022-00JA

HP Operating System DVD

Serial#: 483886-B21

Contec Drivers Software COM Setup Disk v.1.8

Serial# LYBM994

HP Compaq Business PC Documentation and Diagnostics DVD

Serial#: 490849-B21

HP Operating System DVD

Serial#: 394378-002

HP Operating System DVD

Serial# 486467-B22

HP Restore Plus! DVD

Serial#: 481206-B25

Roxio Creator Business 10 DVD

Serial#: 498164-B21

S300H Printed Circuit Board

Model S-3000H SEM Instruction Manual

Serial#: 50E-9247-9

Hitachi S-Type Filaments

Date: 08.06.201

Lot#: 0490228080

Serial#: 777-0179

This item is new in stock. Please enquire for further details.

This item is new in stock. Please enquire for further details.

This GE Healthcare IN Cell Analyzer 2000 Imaging System was removed from a university lab where it was surplus to requirements.

The unit powers on but has not been tested further. The lab Confirmed it was in full working order prior to collection.

It comes with an HP PC, Monitor & Keyboard which has a number of programmes installed including In Cell Analyzer Workstation 3.7.2

It is in good cosmetic condition with some marks from use.

Leica DM2500 Confocal Microscope System w/ Application Suite X Software Lab

This system was removed from a laboratory where it was surplus to requirements.

The client has stated the following: "The systems are fully working and Leica still offer user support for the systems if the new owners so wish. "



The system is in good cosmetic condition.

All units power up and communicate through the included Leica Application Suite X software.

However, there is no camera included, so microscope images cannot currently be viewed via the PC.

The system consists of:

1. 1 x Leica DM2500 microscope
2. Fitted with:
3. 1 x Leica 1531144511 Stage
4. 1 x Leica 11504058 Lamp
5. 1 x Leica 15-6504-202 Light Supply
6. 1 x Leica 1531323 Mirror Junction Box
7. 2 x Leica 507802 HC PLAN 10x/20 Eyepieces
8. 1 x Leica 507902 ACS APO 10x/0.30 CS Objective
9. 1 x Leica 507900 ACS APO 63x/1.30 OIL CS Objective
10. 1 x Leica EL6000 BZ02 with Lightpipe (LCD screen may be faulty, lamp timer not functional)
11. 1 x Leica TCS SPE Laser Head with Leica Supply Unit RGBV
12. 1 x Life Imaging Services 'the box' environmental chamber (with 2 x hoses)
13. 1 x Speirs Robertson Isolation Plate (75cm x 90cm x 5.5cm)
14. 1 x HP Z420 PC with 2 x Monitors, Keyboard & Mouse (running Leica Application Suite X 3.1.2.16221)
15. Includes Leica TCS SPE to SPE II USB licence stick

Leica Microsystems Type - TCS SP2 Confocal Microscope System

This was removed from a university lab where it was surplus to requirements.

What is included is in good working order, but the system is not complete.

It is missing the following;

Table top

Cooling unit

Microscope isolation table

Camera

Flexi tube for prior unit.

Bulb for prior unit.

There may be more missing parts, but we are unable to confirm.

It is in good cosmetic condition with minor marks.

Included are;

Leica TCS SP2 Microscope

Model: RCS SP2

Serial#: 142400026

Attached to microscope:

Leica ∞/0.17/E HCX PL APO 40x/1.25-0.75 OIL CS

Leica ∞/-/C HC PL APO 20x/0.75

Leica ∞/0.17/E HC PL APO 10x/0.40 CS

2 x Eyepieces HC PLAN S 10x/22

Leica Condenser 0.53 S 23 (521500)

Leica C Mount Adaptor 0.5x : 1/2" = 16 (541511)

All other items included:

Prior Lumen200

Model: L200/C

Serial#: 70808

Ernst Leitz Wetzlar Gmbh

Type: 307-072.45

Hg 100 W Bulb

Leica Power Supply for DiodeLaser COH 405nm, 25mW

Part#: 1530910001 03

Leica DM R Manual

Leica Confocal Software

Leica TCS User Manual

Leica PC with Software installed.

Leica Dust cover for Microscope and PC.

Nikon Eclipse TE300 Inverted Fluorescence Microscope System Lab

This was removed from a university lab where it was surplus to requirements.

This system is in good cosmetic condition with all included units in working order.

1 x Nikon Eclipse TE300 body fitted with:

1 x Nikon 065851 multi position binocular neck.

1 x Nikon manual stage.

1 x Nikon filter holder, no filters fitted.

1 x Nikon Condenser Turret fitted with 1 x LWD ∞ Ph3 & 1 x Blanking plate.

The other 3 blanking plates are missing.

1 x Nikon LWD 0.52

2 x Nikon CFI 10x/22 eyepieces.

1 x Nikon Plan Flour

20x/0.50

Ph1 DLL

Objective.

1 x Nikon LHS-H100P-1 Halogen 12v 100w Lamp.

1 x Nikon TE-PSE100 Power supply with control cable.

1 x Nikon LH-M100C-1 Mercury 100w Lamp. (Run hours not known, bulb will require replacement).

1 x Nikon C-SHG1 Power Supply. (Run time counter reset).

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requirements.

Included are;

1x Olympus Fluoview

Model FV1000

The unit is in good cosmetic condition, but the power cables were missing so it has not been tested.

The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed.

1x Olympus Transmitted Light Detector:

Model FV10-TD

The unit is in good cosmetic condition.

1x Olympus Control Box:

Model IX2 UCB

The unit powers on and is in good cosmetic condition.

1x Olympus Power Supply:

Model FV10-PSU

The unit powers on and is in good cosmetic condition.

1x FV10-PSU Key:

Model 1201

The unit is in good cosmetic condition.

1x Olympus Hand-switch:

Model U-HSTR2

The item powers on and is in a reasonable, used cosmetic condition.

1x Olympus Laser Diode Interface Controller:

Model FV10-LDIF

The unit is in good cosmetic condition. The PSU is missing.

1x Olympus Power Supply:

Model U-RFL-T200

Life Time: 3667 hours

The unit powers on and is in good cosmetic condition.

It is not known if the Burner has been replaced after 200 hours.

1x Olympus Mercury Light Source:

Model U-LH100G

The unit powers on and is in good cosmetic condition. The Lamp is working.

1x Olympus Light Source Stand

Model FV10-FIR

The unit is in good cosmetic condition. There are some scuffs and scratches from general use.

1x Olympus Power Supply:

Model FV5-LDPSU

Running hours: 79335.3

The unit powers on and is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units.

1x FV5-LDPSU Olympus Power Supply Key:

Model 1201

The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply.

1x Olympus Laser Head

Model LD405

The unit is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply.

1x IW-R3000N Rack Mountable Server Chassis

The unit powers on and is in good cosmetic condition.

Accessories:

1x Olympus objective correction cap

Model CAP-G0.5 ± 0.5

The unit is in good cosmetic condition

1x Olympus Laser safety shutter

Model F10-SHAUX

The unit is in good cosmetic condition.

1x Olympus Goose neck fibre optic light pipes

Model LGS3F1200UV

The unit is in good cosmetic condition.

Spacers:

2x L3cm xW3cm xH0.5cm

2x L4cm x W4cm x H0.5cm

The units are in good cosmetic condition.

Misc Accessories:

1x IW-R3000N Rack Mountable Server Chassis User manual V2.1

1x Microsoft Windows 2000 XP professional Inst/uninst CD

1x Belkin Serial Adaptor

1x RCA Phono male to male cable (sealed)

1x SATA Cable (C13214-001 FOXCON 0550)

1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable

1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor

1x RCA Female to mini DIN 8-PIN connector (sealed)

1x VGA to DVI connector (sealed)

Installation discs:

2x Belkin USB Adaptor Installation

1x Intel Express installer

1x Sapphire installation driver

1x mini disc

This Solentim Cell Metric Cell Imaging and Analysis Instrument was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with a minor scratch on the front.

The PSU is included.

Zeiss Axioplan 2 Fluorescence Microscope

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

It is made up of the following modules;

Carl Zeiss Axioplan 2 Fluorescence Microscope

S/N: 3511001506

Eyepieces:

2 x Zeiss Pl 10 x 25

P/N: 44 40 34

1x 6 position nosepiece, fitted with 4 objectives:

1x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17

P/N: 44 03 50 02

1x Zeiss EC Plan-NEOFLUAR 100x/1.30 oil ∞/0.17

P/N: 440480-9903

1x Zeiss APOCHROMAT 10x/0.45 ∞/0.17

P/N: 1063-139

1x Zeiss EC Plan-NEOFLUAR 63x/1.25 oil ∞/0.17

P/N: 440460-9904

All additional parts:

1x Zeiss Reflector Turret 322 Synchroflex T 2.5 5/500 with 8x filters:-

1x BF

1x S Gr 1

1x DAPI

1x Tex Red

1x S Or

1x S Aqua

1x Cy5

1x Cy5.5

1x Marzhauser Scan8 Mechanical/Motorised Stage:

P/N: 42-24-407-0000

S/N: 03110373

1x Princeton Instruments Digital Camera

M/N: RTE/CCD-1300-Y/ES

S/N: M059850 7360-01-19

1x Princeton Instruments MicroMax Camera System:

M/N: ST-133

S/N: M059849

1x Carl Zeiss HBO 100 lamp house

P/N: 1007-980

1x Carl Zeiss HAL 100 12v 100w lamp house

P/N: 1039-685

1x LEJ ebq 100 lamp power supply showing 2650 hours of use

S/N: N01415645

2x Iris Stop Slider

P/N: 1062-360

3x Connection cables

1x Zeiss microscope cover

Zeiss Axioplan 2 Fluorescence Microscope w/ 4 Objectives Lab

This item was removed from a university where it was surplus to requirement.

The unit appears to be functioning well and can also be controlled via the free MicroManager software.

It is in good cosmetic condition.

It does feature the following:

2x Eyepieces PL 10 x 25

P/N: 44 40 34

2x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17

P/N: 44 03 51

P/N 44 03 50

1x Zeiss FLUAR 100x/1.30 oil ∞/0.17

P/N: 44 02 85

1x Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17

P/N: 44 04 60

1x Carl Zeiss HAL 100 12v 100w lamp house

P/N: 1039-685

1x Zeiss Reflector Turret with 6 filters

1x FITC

1x TRITC

1x YFP

1x CFP

1x Cy5

1x DAPI

Leica DMR Type 020-525.735 Fluorescence Microscope Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on with the bottom-mounted lamp in good working order.

We are unable to test the top-mounted lamp as the required power supply is not included.

Includes with the microscope are the following:

1. Leica MPS 60 Camera
2. Leica ∞/0.17 C Plan 100x/1.25 Oil Objective
3. Leica ∞/-/A N Plan 5x/0.12 Objective
4. 504058 Leica Illuminator
5. Leica 807-072.057 Lamp Module (damaged)
6. Box of misc tools and accessories

Zeiss Stemi SV 11 Dual Viewing Discussion Teaching Stereo Microscope Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

This item features the following:

1. 4 x Zeiss W-PL 10 x / 23 eyepieces (45 50 44)
2. XXX CellTech Microscope Stand
3. Zeiss Dual Observation Bridge

This Leica MZ12.5 Stereo Microscope with CLS 150 X Light Source was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic conditionwith only minor marks.

Key features of this unit are :-

1. High-performance stereo microscope with 12.5:1 zoom
2. Magnifications up to 640 x
3. Resolution up to 600 line-pairs / mm
4. ZeroStat anti static coating

Leica DM IRB Inverted Microscope with 6 Objectives & EBQ 100 PSU

This item was removed from a university lab where it was surplus to requirements.

The microscope powers on and is in great condition with no visible wear. It has been tested with multiple slides and different filters, and includes six objectives. The EBQ 100 isolated power supply also powers on and is in good condition with minimal wear. We are unable to test it further at our facility.

This microscope comprises the following:

1. Model: DM IRB
2. Type: 090-134.010-000
3. Serial No.: 888212 254578
4. Leica DC 300F Camera
5. Type: DC 300F (12447115)
6. Input: 12V / 600mA
7. Serial No.: 11552003

Objectives:

1. Leica 506090
2. 5x PH 0, ∞ / - / A, N PLAN, 5x / 0.12, PH 0
3. Leica 506088
4. 10x PH 1, ∞ / - / A, N PLAN, 10x / 0.25, PH 1
5. Leica 506202
6. N PLAN, L 20x / 0.40, CORR PH 1, ∞ / 0-2 / C
7. Leica 506060
8. N PLAN, L 40x / 0.55, CORR PH 2, ∞ / 0-2 / C
9. Leica 506062
10. PL FLUOTAR, L 63x / 0.70, CORR PH 2, ∞ / 0.1 - 1 .3 / C
11. Leica 506159
12. 100x PH 3, ∞ / - / D, N PLAN, 100x / 1.25 Oil, PH 3

EBQ 100 Isolated PSU:

1. Type: ebq 100 isolated - L / 131.26E
2. Serial No.: N 19419356

Leica DM IRB Inverted Microscope with 6 Objectives & EBQ 100 PSU

This microscope was removed from a university lab where it was surplus to requirements.

It powers on and is in great condition with no visible wear. It has been tested with multiple slides and includes six objectives. The unit has passed PAT testing.

The microscope comprises the following:

1. Leica DM IRB Inverted Microscope

1. Leica DC 200 FireWire colour camera

1. EBQ 100 PSU

Objectives:

1. Leica 506090
2. 5x PH 0, ∞ / - / A, N PLAN, 5x / 0.12, PH 0
3. Leica 506088
4. 10x PH 1, ∞ / - / A, N PLAN, 10x / 0.25, PH 1
5. Leica 506058
6. N PLAN, L 20x / 0.40, CORR PH 1, ∞ / 0-2 / C
7. Leica 506060
8. N PLAN, L 40x / 0.55, CORR PH 2, ∞ / 0-2 / C
9. Leica 506062
10. PL FLUOTAR, L 63x / 0.70, CORR PH 2, ∞ / 0.1 - 1.3 / C