This Camag DBS-MS 500 HCT Dried Blood Spot Processing Machine with CTC PAL RSI was removed from a university lab where it was surplus to requirements.

The lab confirmed that it was in full working order prior to removal and had barely been used.

The system is made up of the following modules;

Camag Dried Blood Spot Processing Machine

Model - DBS-MS 500 HCT

Item ID - 050 0501

SN - 270673

Unit dimensions - L126 W81 H63cm (with nothing on top) H140cm (with PAL System)

We have powered the system up at our facility.

CTC PAL System

Model - PAL RSI (SN-595999)

Unit dimensions - L68 W64 H78cm

The unit powers on and appears to be in working order running through checks on start-up.

Parts:-

PAL NXY-03-02B (SN-595754)

PAL NC-04-01E (SN-595663)

PAL NM-06-01C (SN-590739)

PAL NZ-20-012C (SN-582794)

PAL NB-01-01C (SN-576104)

PAL Robot Power Supply

PAL Cooler Power Supply

Cables

The item is in good, used cosmetic condition and is very clean. It was not tested any further at our facility than checking that everything powers on, but as mentioned previously it was confirmed as fully working before it came to us.

Accessories/Consumables:-

1 x Box labelled Cables/tubing Includes Camag DBS-MS 500 Controller

1 x Camag Transport lock DBS-MS Plate 2 (740.1039)

1 x Camag Transport lock DBS-MS Plate 1 (740.1034)

1 x Camag PAL Installation Kit (0.50.0579)

2 x Camag TFN DBS Card (050.0600)

4 x Duran 25ml Glass Bottles

1 x Duran 500ml Glass Bottle

2 x 250ml Fisherbrand/Duran Glass Bottles

4 x Duran 1000ml Glass Bottles

2 x Rinsing & Extraction Bottle Trays 18 x 52 x 8cm

5 x Rack Trays 45 x 18 x 10cm

1 x Box labelled Camag Part Supply includes:-

Camag Contact Closure Cable (125.5152)

PAL Sample control Version 3.1.0

Chronos Quick Guide

DBS-MS 500 PAL Offline Mode Instruction

DBS-MS 500 Instruction Manual

PAL System Manual

Camag Unpacking the DBS Guide

PAL Interface Cable 3m

Tecan Freedom Evo-2 200 Base

SN - 805001177

The item powers on and is in a good, used cosmetic condition.

Software:-

Tecan EVOware Dongle

Evoware Standard V2.1 SP1 CD

Instrument Software Version 6.1 SP1

Getting Started Guide

Operating Manual

Accessories/Consumables:-

2 x 10L Bottles (Waste/System Liquid)

23 x Sealed Packs TipOne Automation Tips 1000μl (96 Tips/Wafer)

23 x Sealed Packs TipOne Automation Tips 1-50μl (96 Tips/Wafer)

5 x Packs Sartorius Optifit Low Retention Refill Tips 350μl (10 x 96 per pack) 1 Packs has two tips missing

1 x Pack Tecan MCA96 Nested Disposable Tips Natural 50μl (8 x 96pcs)

2 x Packs Sartorius Optifit Tips 5000μl (100 Tips per box)

1 x Pack Eppendorf Combitips 0.5ml (4 tips left in box)

1 x Pack Star Lab Gel-Loading Pipette Tips 0.1-10μl (Qty unknown)

1 x Pack Star Lab 500μl Gilson-Type Graduated Macro Tips (Qty unknown)

1 x Tecan White case with tools

Unit dimensions - L212 W77 H102cm

Internal dimensions - L190 W74 H90cm

Table dimensions - L208 W76 H92cm

This item is new in stock. Please enquire for further details.

This was removed from a university lab where it was surplus to requirements.

Included are;

Gilson 268 Pipetmax

Model no. 32100001

SN - 321D6A042

Unit dimensions - L63 W52 H70cm

The item powers on and is in reasonable used cosmetic condition, there are a few cracks around the unit on the perspex covers.

Windows Tablet

Model no. 32000321

SN - 66MCV22

The tablet automatically starts up Gilson Trilution Software. We have the password available on purchase.

Gilson Model GCP Dell Doc

SN - G00M-A00

3 x Gilson Dongles:-

LT3204USB PIPETMAX Docs v2 Reference Docs 1.1

LT3203USB TRILUTION micro V2 Documentation v1.2

Blue Dongle labelled Trilution

Gilson 5mm Allen Wrench (4320502)

AC Power Adaptor

Consumables:-

6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 50μl (15 x 96 Tips in Racks) Full & Sealed inside

1 x Box of Eppendorf epT.I.PS. Motion 1 - 50μl (10 x 96 Tips in Racks) 9 Sealed inside

6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 20-300μl (15 x 96 Tips in Racks) Full & Sealed inside

1 x Box of Eppendorf epT.I.PS. Motion 1 - 20-300μl (11 x 96 Tips in Racks) Sealed inside

16 x Boxes of Gilson DL10 Diamond Reload Packs (960 Tips per box Volume Range 0.1 - 20μl)

1 x Box of Gilson DL10 Diamond Reload Packs (257 Tips in box Volume Range 0.1 - 20μl)

18 x Boxes of Gilson DL200 Diamond Reload Packs (960 Tips per box Volume Range 2 - 200μl)

1 x Box of Gilson DL200 Diamond Reload Packs ( 192 Tips in box Volume Range 2 - 200μl)

Life Sciences QD12844R1 Laboratory Cleanroom

This is being sold on behalf of a client. It is surplus to requirements.

It had a visit from an engineer in 2021, where it had new filters installed. It hasn't been used since it may need new filters again if there has been a build-up of dust. It was in full working order prior to not being used. It is in excellent cosmetic condition and has hardly been used.

We have the Engineer's Validation report for it from 2021 available on request if you would like to see it.

Beckman Coulter Biomek FX Robotic Automated Liquid Handling System

This was removed from a university lab where it was surplus to requirements.

The unit has been tested and is in good working order. The tiploader has been tested with a jun-air compressor which is not included in the sale.

The system includes a Dell Optiplex 380 running Windows XP. It has various software installed including Beckman Coulter Biomek 3.3 (Build 14)

This allows control of the Biomek FX robot. The other PC contains no Biomek software. The SATA HDD contains an old version of the Biomek software running on Windows NT.

Also Included with it are;

Stone PC - No software

Boxed Hard Drive

NEC 19" Monitor

Microsoft Keyboard

HP Mouse

Beckman Coulter Integrated Solutions CD

This CrytstalMation Rigaku Minstrel HT & Gallery 700 Incubator System was removed from a university lab where it was surplus to requirements.

The lab retained the "phoenix" unit and the image server PC as well as the software. It was reported as otherwise fully working.

Included in the system are;

1 x Middle PC Unit:-

Model - Minstrel HT PC/Monitor

1 x Model - Minstrel HT CCU

Hours -573282

1 x Dell Power Connect 2708

Dell PC - The unit powers on and has Minstrel & Robot Programs

2 x Model - Gallery 700 Incubators

Both the units power up.

Everything powers up but the system has not been tested, the incubators need to be connected to the PC unit to be operated. Everything looks to be in good, used cosmetic condition.

The manuals are included.

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2  

This was removed from a university lab where it was surplus to requirements.

At our facility we were only able to power it up, but we are told it was in full working order prior to removal. The only issues is that the gas struts have failed.

It is in excellent cosmetic condition with hardly any marks from use.

There are various accessories included.

This Huber Unistat 380W Refrigerated Heating Circulator was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. Both digital displays are working and display clearly. All buttons appear to be responsive to the unit.

BE: Version 3.7

This PEAK Scientific Genius XE 35 Nitrogen Gas Generator was removed from a university lab where it was surplus to requirements.

The unit powers up and runs, but has not been tested further at our facility. It is currently out of service but has been serviced up to 2022 previously.

It is in good cosmetic condition with minor marks from use.

This Beckman Coulter BIOMEK FX Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.

The system is in full working order and was used until very recently.

Included in the system are;

1 x Biomek fx unit

1 x Thermo Cytomat Microplate Hotel unit

1 x Masterflex console drive with easy load pump 2 mdl 77200-52

1 x Masterflex economy drive with easy load pump 2 mdl 77200-52

1 x Mains power distribution unit /transformer

2 x New carousel storage units

Various leads for the system, water hoses with push connectors.

Spare perspex plates, new needles and many other parts

Operation manuals for system

Water bottles

The PC tower is a Lenovo thinkcentre m85. It has the following installed on it;

Windows 7 operating system

Various standard Microsoft programmes

Beckman operating software

Biomek software

PCI cards for connecting to the system & various connection leads

There is a widescreen monitor, keyboard and mouse also supplied with the system.

This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university lab where it was surplus to requirements.

All units are in good used cosmetic condition but they do have various signs of general use.

The system consists of:

1 x Beckman Coulter Biomek Fxp CAT No A31842.

The unit powers up and both lights illuminate Green. It was not tested any further.

The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included.

1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.

It comes with:

2 x Stacker 10 hotels.

2 x FX Stacker 10 hotels.

1 x Stacker Carousel Pendant.

The mounting plate to connect it to the Fxp is included.

It also comes with a spare Microscan, operational condition is unknown.

1 x Lenovo PC with monitor, mouse & keyboard.

It has the Biomek Version 3.3 software installed.

1 x Jun-Air 1795001 Compressor.

The system also includes quite a few plates and consumables and various connection cables.

This Thermo Scientific Multifuge X3R Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in excellent cosmetic condition with only minor marks from use.

Included with it is;

1 x Thermo Scientific Rotor Model No. 75003607

2x Swinging Buckets

Model 75003608

Max Load 800g

Max Speed 4700rpm

Max Cycle 70000 cycles

(2x) 5x50ml Tube Holders

2x Swinging trays/Microplate Buckets

75003617

Max load 500g

Max Speed 4700rpm

Max Cycle 120000 cycles

Autoclavable 121ºC

New Brunswick Innova 4400 Floor Standing Shaking Incubator Double Stack

These were removed from a university lab where they were surplus to requirements.

They have been fully tested to incubate and shake by a service engineer. They are in full working order.

Inside dimensions - D57 W93 H44cm

Platform - 46 x 77cm

They come with brackets for stacking, but there are only 3 feet and one of them is broken.

This Constant Cell Disruption Systems Z2/40/AA/AA Cell Disruptor was removed from a university lab where it was surplus to requirements.

The system powers up and is in reasonably good cosmetic condition with minor marks from previous use.

Main unit - L70 W58 H77cm

Frame - L68 W54 H57cm

This item is new in stock. Please enquire for further details.

This Beckman Coulter Biomek NXp Automated Liquid Handling Robot System was removed from a university lab where it was surplus to requirements.

The NXp has a 96-well pipetting head as well as carousel to allow storage of plates/tips/reagents etc. The robot is not climate controlled but it is enclosed in a safety cabinet The NXp requires tips purchased from Biomek for accurate pipetting. The instrument is connected to a PC running software to enable programming and scheduling and have been used extensively for (though not limited to) cell-based screening (cell plating, transfection, fixation and staining), including siRNA screens and for cell-free screening with small molecule libraries, in both 96-well and 384-well format.

The system is in good used cosmetic condition but it does have various marks from general use. One end piece appears to be missing from the shroud sensor strip of the NXp. This does not affect the operation of the unit.

All parts power up as they should and appear to operate as they should.

The system consists of:

1 x Beckman Coulter Biomek NXp.

The unit has been powered up and the 'home all axis' program has been executed via the Biomek software.

It appears to run as it should. We have videos of it working.

1 x Thermo Cytomat Microplate Hotel with manual.

The unit powers up fine. The Cytomat has been 'initialized' and has had various commands executed via the Cytomat 6000 software. It appears to run as it should. (note that P1 on the multi cable is COM3 on the PC).

We also have videos of this working.

1 x Jun-Air 40 Liter Compressor with manual.

The unit powers up fine and supplies air to the Biomek as it should. It was tested via the 'Rods up' 'Rods down' control on the Biomek software.

1 x Thermo Scientific ALPS 3000 Automated Microplate Heat Sealer with MGF SIL-EOL 24/50 GF Compressor & manual.

The compressor appears to supply as it should although the ALPS 3000 has a 'low air' warning on it. We were unable to test any further.

The ALPS rear states 6bar of pressure but we could only get the compressor to supply 5bar. This is possibly why it has a 'low air' warning.

1 x BigNeat Robotics Bench Mounted Clean Air Enclosure made in 2007.

The enclosure is in good used cosmetic condition. Though it does have various marks from general use. The enclosure powers up fine, light and fan both work as they should. The Green illuminated switch does not light up for the fan. It is a very common issue and does not affect the operation of the unit.

BigNeat last tested it in 2021.

The enclosure measures:

(External) 210cm L x 100cm W x 168cm H.

(Internal) 202cm L x 92cm W x 116cm H to internal light.

1 x Lenovo ThinkCentre PC with Keyboard, Mouse & Monitor.

Includes a PCi card with a comm breakout cable to control all the systems.

The PC is running Windows XP.

There are Four user accounts setup the passwords have been removed from them all.

The PC has the following software installed:

Beckman Coulter Biomek 3.3.14.

Cytomat 6000.

Plus various other std Windows programs.

Also included are the following software packages on CD:

Beckman Coulter Biomek Tutorials for software version 3.3.

Beckman Coulter Install Disk BIOMEK SYSTEM Version 3.3 Build 14.

Beckman Coulter Accounts & Permissions Version 3.0.

Beckman Coulter Recovery DVD.

There are some spares included. We do not know the operational condition of them.

1 x SMC Booster Regulator NVBA1111-T02.

2 x Gurley Precision Instruments L18S001A0040A0020A 40mm Encoders.

2 x Boxes Thermo 59910052 Shandon Cytoclips.

2 x Cartons of Transnet YX Well Plates with shipping packs etc.

1 x Thermo AB-3738 Pierceable Sealing Foil 78mm Roll (brand new sealed).

2 x A19839 Extrusion Table Spacers (sealed in tubes).

2 x Pairs of A30107 Robot Gripper Rods.

Various boxes of consumables, cables & hoses.