Materials Testing Systems
Items 1 to 9 of 9

£ 14,000.00 (ex. VAT) 1 in stock
ZwickRoell Z050 Universal Tester System w/ Control Unit & Software Lab
ITEM-47062
ZwickRoell Z050 Universal Tester System w/ Control Unit & Software Lab
This system was removed from a university laboratory where it was surplus to requirements.
The ZwickRoell Z050 Universal Tester system shows signs of general use with various marks but remains in reasonable cosmetic condition.
The control unit powers up, and the previous owner stated it was working prior to removal. A Zwick service engineer also confirmed this.
The system consists of the following:
- Zwick Z050 B066550.00.01 Materials Tester
- Zwick Z050 BZ050/TH3A Power Supply/Control Unit
Additionally, a Dell Optiplex 7010 PC is included, featuring:
- Windows XP OS
- TestXpert V3.3 software
The login information is available on request.
Model: Z050Serial No.: B066550.00.01

£ 1,200.00 (ex. VAT) 1 in stock
Instron 5543 Single Column Table Top Tensile Tester System Spares/Repairs
ITEM-25140
Instron 5543 Single Column Table Top Tensile Tester System Spares/Repairs
This was removed from a university lab where it was surplus to requirements.
The unit did not power up in testing. It is sold for spares/repairs.
Included are the following;
Accessories.
1x lockable tool chest with misc bit items inside.
1x user manual
1x Materials testing quick guide (laminated)
1x home made timer box (plug removed)
1x Transducer unit

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
INDENTEC Hardness Testing Machine 5030SKV Lab Spares/Repairs
ITEM-34831
INDENTEC Hardness Testing Machine Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, however it displays the following error: Check Lead which prevents further use.
It is listed as Spares/Repair.
Also included:
Calibration Certificate
User Manual
Optic Head

£ 985.00 (ex. VAT) 1 in stock
Vickers-Armstrong Pedestal Hardness Tester Lab
ITEM-37040
Vickers-Armstrong Pedestal Hardness Tester
This was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition with marks from use.
The system is mechanically sound, but we were told by the lab that the diamond might be damaged. We have been unable to confirm or deny this.

£ 700.00 (ex. VAT) 1 in stock
ESEWAY Hardness Tester SPV2P Lab
ITEM-45098
ESEWAY Hardness Tester SPV2P
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock
Wykeham Farrance Oedometer CBR Testing Lab
ITEM-34568
This Wykeham Farrance Oedometer CBR Testing was removed from a university lab where it was surplus to requirements.
The unit powers up the hand control unit works correctly, and the hydraulic ram goes up and down freely.
It is in reasonable cosmetic condition with marks from use.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ POA 1 in stock
Amsler Vibrophore 20 kN High Cycle Fatigue Testing Machine S/R
ITEM-49538
Amsler Vibrophore 20 kN High Cycle Fatigue Testing Machine
This item is sold on behalf of a client where it is surplus to requirements.
It is designed for high cycle fatigue work and is commonly used for pre-cracking specimens prior to further analysis.
The system is mounted on a heavy-duty concrete reaction block, weighing approximately 2 tonnes. The controller is not currently present with this machine.
Therefore, it is listed as Spares/Repair.
For further information, we can put prospective buyers in direct contact with the client. A site visit is advised and welcomed.
Due to the nature of the item, the buyer will need to arrange collection.
The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ POA 1 in stock
Instron 8501 Servo Hydraulic Test Frame with Integrated Vacuum Furnace S/R
ITEM-49537
Instron 8501 Servo Hydraulic Test Frame with Integrated Vacuum Furnace
This item is sold on behalf of a client where it is surplus to requirements.
It comprises an Instron 8501 servo hydraulic test frame integrated with a vacuum furnace, designed for high-temperature materials testing. The load train area is fully enclosed within the furnace, allowing use at temperatures up to 1600°C. Due to the internal Molybdenum fixturing, the system must be operated under vacuum conditions, as oxidation occurs rapidly above 400°C in air. The maximum compressive load achievable at 1600°C is 1 kN.
This system does not include an Instron controller or hydraulic power supply, therefore, it is listed as Spares/Repair.
Model: Instron 8501
For further information, we can put prospective buyers in direct contact with the client. A site visit is advised and welcomed.
Due to the nature of the item, the buyer will need to arrange collection.
The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ POA 1 in stock
Zwick Roell HFP51 High Frequency Fatigue Testing System 100 kN / 10 kN Load S/R
ITEM-49539
Zwick Roell HFP51 High Frequency Fatigue Testing System 100 kN / 10 kN Load Cell
This item is sold on behalf of a client where it is surplus to requirements.
It is designed for fatigue testing applications and is fitted with both 100 kN and 10 kN load cells. The controller is currently unserviceable, though it may be possible to repair. The system is considered a more advanced version of the Amsler Vibrophore.
Model: HFP51
Load Cells: 100 kN and 10 kN
For further information, we can put prospective buyers in direct contact with the client. A site visit is advised and welcomed.
Due to the nature of the item, the buyer will need to arrange collection.
The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.
Items 1 to 9 of 9