Other Microscope Accessories

Our Other Microscope Accessories category offers a selection of high-quality, second-hand components designed to support and enhance various microscopy systems. This includes items such as coverslips, adapters, camera mounts, stage inserts, and filter sets, essential for optimizing imaging performance and ensuring smooth operation. These accessories are ideal for labs in need of supplementary components to maintain or upgrade their microscope setups.

Equipment undergoes varying levels of testing, including functionality checks and compatibility assessments, ensuring reliable and efficient solutions for your microscopy workflows. Perfect for labs requiring additional or replacement accessories to enhance their imaging capabilities.

Items 1 to 16 of 16

£ 3,785.00 (ex. VAT) 1 in stock

Olympus Fluoview FV1000 System - Incomplete System - No Microscope Lab

ITEM-25672

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requirements.

Included are;

1x Olympus Fluoview

Model FV1000

The unit is in good cosmetic condition, but the power cables were missing so it has not been tested.

The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed.

1x Olympus Transmitted Light Detector:

Model FV10-TD

The unit is in good cosmetic condition.

1x Olympus Control Box:

Model IX2 UCB

The unit powers on and is in good cosmetic condition.

1x Olympus Power Supply:

Model FV10-PSU

The unit powers on and is in good cosmetic condition.

1x FV10-PSU Key:

Model 1201

The unit is in good cosmetic condition.

1x Olympus Hand-switch:

Model U-HSTR2

The item powers on and is in a reasonable, used cosmetic condition.

1x Olympus Laser Diode Interface Controller:

Model FV10-LDIF

The unit is in good cosmetic condition. The PSU is missing.

1x Olympus Power Supply:

Model U-RFL-T200

Life Time: 3667 hours

The unit powers on and is in good cosmetic condition.

It is not known if the Burner has been replaced after 200 hours.

1x Olympus Mercury Light Source:

Model U-LH100G

The unit powers on and is in good cosmetic condition. The Lamp is working.

1x Olympus Light Source Stand

Model FV10-FIR

The unit is in good cosmetic condition. There are some scuffs and scratches from general use.

1x Olympus Power Supply:

Model FV5-LDPSU

Running hours: 79335.3

The unit powers on and is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units.

1x FV5-LDPSU Olympus Power Supply Key:

Model 1201

The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply.

1x Olympus Laser Head

Model LD405

The unit is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply.

1x IW-R3000N Rack Mountable Server Chassis

The unit powers on and is in good cosmetic condition.

Accessories:

1x Olympus objective correction cap

Model CAP-G0.5 ± 0.5

The unit is in good cosmetic condition

1x Olympus Laser safety shutter

Model F10-SHAUX

The unit is in good cosmetic condition.

1x Olympus Goose neck fibre optic light pipes

Model LGS3F1200UV

The unit is in good cosmetic condition.

Spacers:

2x L3cm xW3cm xH0.5cm

2x L4cm x W4cm x H0.5cm

The units are in good cosmetic condition.

Misc Accessories:

1x IW-R3000N Rack Mountable Server Chassis User manual V2.1

1x Microsoft Windows 2000 XP professional Inst/uninst CD

1x Belkin Serial Adaptor

1x RCA Phono male to male cable (sealed)

1x SATA Cable (C13214-001 FOXCON 0550)

1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable

1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor

1x RCA Female to mini DIN 8-PIN connector (sealed)

1x VGA to DVI connector (sealed)

Installation discs:

2x Belkin USB Adaptor Installation

1x Intel Express installer

1x Sapphire installation driver

1x mini disc

£ 1,750.00 (ex. VAT) 1 in stock

PicoView PV-500 Nanospray Source w/ Model XC-ST30CE Sony CCD Camera Lab

ITEM-44487

PicoView PV 5000 w/ Model-XC-ST30CE Camera Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power on or test it further at our facility.

This item is fitted with the following:

Melles Griot 160/0.17 2.5/0.07 Objective
CCD Video Camera Module

£ 1,500.00 (ex. VAT) No longer available

Olympus Mitico cellTIRF-4Line Laser System Control Module Lab

ITEM-44409

Olympus Mitco cellTIRF-4Line Laser System Control Module Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility due to the correct power supply not being included.

As seen, this item contains 3 of 4 included filters.

£ 1,500.00 (ex. VAT) 1 in stock

Digital Instruments Nanoscope IV Scanning Probe Microscope Controller Model NS41

ITEM-37961

This Digital Instruments Nanoscope IV Scanning Probe Microscope Controller Model NS41 was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further at our facility. The lab confirmed it was working when last used.

It is in reasonably good cosmetic condition but has some marks from use.

£ 1,000.00 (ex. VAT) 1 in stock

Carl Zeiss Micro Imaging AIM System Control

ITEM-24234

£ 1,000.00 (ex. VAT) 1 in stock

ZEISS Microscope Multi Observation Bridge Left and Right with Pointer 425141

ITEM-29935

This Zeiss Microscope Multi Observation Bridge Left and Right with Pointer was removed from a university lab where it was surplus to requirements.

This item is in very good cosmetic condition.

This item is untested and the PSU is not included.

£ 1,000.00 (ex. VAT) 1 in stock

Digital Instruments Signal Access Module lll Lab

ITEM-37962

This Digital Instruments Signal Access Module lll was removed from a university lab where it was surplus to requirements.

The lab confirmed the unit was working when last used, but it has not been tested at our facility.

It is in reasonably good cosmetic condition but has some marks from use.

System comprises;

6 x pairs low voltage inputs to the nanoscope controller (data signal)

12 x pairs low voltage inputs from the nanoscope controller (control signals)

6 x pairs of high voltage outputs from the nanoscope controller (piezo drive signals)

6 x pairs of inputs to the sensor

4 x pairs outputs from the sensor

2 x ports to microscope controller

1 x port to microscope

1 x port to sensor

£ 900.00 (ex. VAT) 1 in stock

Olympus U-ETBI Microscope Ergo Head Tilt Telescope for BX & CX Models Lab

ITEM-34599

This Olympus U-ETBI Microscope Ergo Head Tilt Telescope was removed from a university lab where it was surplus to requirements.

Item appears to function correctly after being tested over a light source and slide and is in very good, clean condition.

No further testing was carried out.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Job Lot of Miscellaneous Microscope Parts And Laser Parts Lab

ITEM-45547

Job Lot of Miscellaneous Microscope Parts And Laser Parts

This job lot of items come from a university, where they were surplus to requirement.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

£ 510.00 (ex. VAT) 1 in stock

Olympus Motorized Reflector Turret Model - I X2-RFACA Lab

ITEM-23300

This Olympus Motorized Reflector Turret Model - I X2-RFACA was removed from a university lab where it was surplus to requirements.

The unit has not been tested but it is in good cosmetic condition with some light usage marks.

£ 315.00 (ex. VAT) 1 in stock

Nikon Microscope Power Unit V-PS100E Lab

ITEM-35603

Nikon Microscope Power Unit V-PS100E

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility.

It is in good cosmetic condition with minor marks.

£ 300.00 (ex. VAT) 1 in stock

ZEISS AxioLab 5 Teaching Head w/ Carl Zeiss Eye Pieces Lab

ITEM-29934

This ZEISS AxioLab 5 Teaching Head was removed from a university lab where it was surplus to requirements.

This item is in very good cosmetic condition.

Objectives included:

2 x Carl Zeiss W-PI 10x/23

£ 300.00 (ex. VAT) 1 in stock

Nikon BioStation Controller BS-ERG 810240 Lab

ITEM-44431

Nikon BioStation Controller BS-ERG 810240 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and goof mechanical order, we are unable to test it further at our facility.

£ 250.00 (ex. VAT) 1 in stock

Leitz Wetzlar Microscope Filters Lab - S520-55-90 CB12 K490 K470 K46 Blau BG12

ITEM-41616

Leitz Wetzlar Filtered Slides With Wooden Box Lab

This item was removed from a university where it was surplus to requirement.

This item is in good used condition, none of the contents included have been tested.

All items included:

1 x S520-55-90 CB12

1 x K490. K470

1 x K460 K430

1 x K530 K510

2 x Blau BG12

1 x Blau BG38

1 x Grau 5% NG4

2 x Grau 0.2% NG3

1 x UV UG5

2 x UV UG1

1 x Diffus N

NEW ITEM

£ 170.00 (ex. VAT) 1 in stock

Nikon P-IER Eye Level Riser 25 mm Lab

ITEM-36120

Nikon P-IER Eye Level Riser 25 mm

This unit is brand new in the box.

£ 155.00 (ex. VAT) 1 in stock

Zeiss Microscope Condenser Part no. 45 17 53 DIC Phase Contrast Lab

ITEM-27669

This Zeiss Microscope Condenser Part no. 45 17 53 was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition. There are some scratches/signs of prior use. Looking through it reveals that is clear and without marks.

This item does not contain either of the DIC prisms.

It does contain the Ph3 and Ph2 prisms.

Items 1 to 16 of 16