Laboratory Fluid Pumps and Dispensers
Items 1 to 20 of 33
£ 1,655.00 (ex. VAT) 1 in stock
GE Healthcare ReadytoProcess Wave 25 Pump Lab
ITEM-31790
This GE Healthcare ReadytoProcess Wave 25 Pump was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested due to the lack of the correct power supply.
Mfg 2015
2x 114DV Pumpheads:
WMA P/N: 113.5000.R33
S/n 66056-3
£ 1,630.00 (ex. VAT) 1 in stock
Watson Marlow 520U Peristaltic Pump with Head Adapter & Extension Lab
ITEM-25090
This Watson Marlow 520U Peristaltic Pump with Head Adapter & Extension was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition with minor marks from use.
All buttons are responsive to the unit.
It is fitted with;
1 x Pump head adaptor
313D/A
3 Roller 1.6mm WT Tubing
The pump head moves when selected.
The unit is in good cosmetic condition.
1 x Pump head Extension
313X
3 Roller 1.6mm WT Tubing
The pump head moves when selected.
The unit is in good cosmetic condition.
No further testing done.
£ 1,055.00 (ex. VAT) 1 in stock
Spectrum Labs KrosFlo Research II Pump 900-1612 w/ MasterFlex Pump Head Lab
ITEM-31624
Spectrum Labs KrosFlo Research II Pump 900-1612 w/ MasterFlex Pump Head
This was removed from a laboratory where it was surplus to requirements.
The unit powers up but is missing its control interface, but it is operable.
Included are;
KrosFlo Research II Pump:
Model No. 900-1612
MasterFlex Pump Head:
Model No 900-1613
Tubing Sizes:
L/S 13, 14, 16, 25, 17, 18
Accessories:
1x RS232 to Male DIN Cable:
2x Pairs of Grips
Material: Plastic
2x Arms
Material: Metal
The units are bolted to a metal plate attached underneath the unit. They are in good cosmetic condition and can be easily removed if necessary.
1x Misc Grip
Material: Aluminium
The unit is in good cosmetic condition.
2x Arm Grips:
Material Plastic
The units are in good cosmetic condition. They hold position well against the metal upright arms.
£ 825.00 (ex. VAT) 1 in stock
Watson Marlow 520U Peristaltic Pump with Trespa Skate Lab
ITEM-24347
This Watson Marlow 520U Peristaltic Pump was removed from a university lab where it was surplus to requirements.
The unit powers on and appears to be in working order with pump speed running up to 220rpm
The item is in good, used cosmetic condition with some marks from use
Skate size - 45 x 30cm
£ 800.00 (ex. VAT) 2 in stock
Integra DOSE IT P910 Peristaltic Laboratory Pump w/ 313X Watson-Marlow Head Lab
ITEM-31605
This was removed from a university lab where it was surplus to requirements.
The unit powers up with an external power supply (not included). All the buttons and dials are responsive.
Attached is a Model 313X Watson Marlow Pump head.
The system is in good cosmetic condition with marks from use.
Software version 2.02
Input Voltage: 46.6-49.4 VDC (required PS)
Power Max 70w
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.
£ 780.00 (ex. VAT) 2 in stock
Integra DOSE IT P910 Peristaltic Laboratory Pump w/ Watson-Marlow Head Lab
ITEM-31603
This Integra DOSE IT P910 Peristaltic Laboratory Pump was removed from a university lab where it was surplus to requirements.
The unit powers up with an external power supply (not included). All the buttons and dials are responsive.
Attached is a Model 313D Watson Marlow Pump head.
The system is in good cosmetic condition with marks from use.
Software version 2.02
Input Voltage: 46.6-49.4 VDC (required PS)
Power Max 70w
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.
£ 720.00 (ex. VAT) 1 in stock
Lot of Cole Parmer Pump Drives, Heads & Liquid Level Interface - 7544-06 Lab
ITEM-27760
Lot of Cole Parmer Pump Drives, Heads & Liquid Level Interface. These were removed from a university lab where they were surplus to requirements.
Included are;
1 x Pump Drive: Model No. 7544-06 Speed 6rpm
The unit powers on and is in good cosmetic condition. The motor moves smoothly.
We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. It was then removed.
1 x Pump Drive: Model No. 7544-20 Speed 20rpm
The unit powers on and is in good cosmetic condition. The motor moves smoothly. We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. It was then removed.
1 x Liquid Level Interface Model LI-08/B01 The unit is in good cosmetic condition.
2x Pump Heads:
Model No. 7014-20
Part No. 3.358.609
2x Masterflex Norprene tubing
Model No. 6404-14
£ 670.00 (ex. VAT) 1 in stock
Jencons Perimatic Premier Peristaltic Pump Dispenser Lab
ITEM-24391
This Jencons Perimatic Premier Peristaltic Pump Dispenser was removed from a university lab where it was surplus to requirements.
The item powers on and appears to be in working order. It is in good cosmetic condition with some marks from use.
£ 650.00 (ex. VAT) 1 in stock
Lot of Cole Parmer MasterFlex Pump Heads & Drives - 7014-52, 7024-20, 7013-20
ITEM-27758
Lot of Cole Parmer MasterFlex Perstaltic Pump Heads
These were removed from a university lab where they were surplus to requirements.
Included are;
2 x Masterflex Cole Parmer Pump Drives
Mod Nos. 7544-06
Speed 6rpm
The units power on and are in good cosmetic condition with marks and stains.
1x Pump drive has what looks like a terminal block wire connector. We attached a plug for testing but later removed it.
Pump Drive Dims:
L27cm x W10cm x H11cm
Pump-Head Dims:
L6cm x W7.5cm x H8cm
Masterflex Cole Parmer Pump Heads:
Part Nos. 3,358,609 - all have the same Part No.
2x Model 7014-52
The units are in good cosmetic condition.
There are some surface stains on all of the unit's ball bearings from general use. The ballbearing mechanism was tested by hand the action felt smooth.
2x Model 7024-20
The units are in good cosmetic condition. The ballbearing mechanism was tested by hand the action felt smooth.
2x 7013-20
The unit is in good cosmetic condition.
The ballbearing mechanism was tested by hand the action felt it had some resistance. One of the fluid dispersing mechanisms stuck inside the housing of one of these pump heads.
£ 615.00 (ex. VAT) 1 in stock
Cole-Parmer MasterFlex Console Drive & 77390-00 PTFE Tubing Pump Lab
ITEM-29825
Cole-Parmer MasterFlex Console Drive & 77390-00 PTFE Tubing Pump
This was removed from a university lab where it was surplus to requirements.
The unit powers up and looks to be in working order, though it has not been tested with liquids.
It is in good cosmetic condition with minor marks from use.
£ 425.00 (ex. VAT) 1 in stock
Watson-Marlow 604 U/R Peristaltic Pump Lab
ITEM-12927
Watson-Marlow 604 U/R Peristaltic Pump Lab
This unit was removed from a lab as surplus to requirements.
The item is in reasonable cosmetic condition but it has scratches on its exterior and the plastic panel has been taped to secure its position.
The item powers up without issue and we were able to adjust the inputs, direction and speed with ease. It was not tested further.
£ 360.00 (ex. VAT) 1 in stock
Camlab Watson - Marlow Peristaltic Pump Type 501S 50
ITEM-24539
This Camlab Watson - Marlow Peristaltic Pump Type - 501S 50 was removed from a university lab where it was surplus to requirements.
The item powers on and appears to be in working order. It is in reasonably good cosmetic condition with marks from use.
£ 340.00 (ex. VAT) 1 in stock
Watson Marlow SCI Q 400 Peristaltic Pump Lab
ITEM-24635
This Watson Marlow SCI Q 400 Peristaltic Pump was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition with marks from general use. We used an 18v DC/15v AC adaptor to test it. (not included).
It wasn't tested further.
£ 310.00 (ex. VAT) 1 in stock
New Brunswick Scientific Bio Flo 110 Peristaltic Pump for Fermentation System
ITEM-25354
This New Brunswick Scientific Bio Flo 110 Peristaltic Pump for Fermentation System was removed from a university lab where it was surplus to requirements.
The unit powers up and all 4 pump heads turn.
It is in reasonably good cosmetic condition with marks and stains.
£ 275.00 (ex. VAT) 1 in stock
Watson Marlow 501 Peristaltic Pump Type 501-S10 Lab
ITEM-26452
This Watson Marlow 501 Peristaltic Pump Type 501-S10 was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order.
It is in reasonably good cosmetic condition but has some marks from use.
£ 265.00 (ex. VAT) 1 in stock
2x Masterflex Cole Parmer 7544-06 Pump Drives w/ Heads - 7013-20 7544-20
ITEM-27759
These were removed from a university lab where they were surplus to requirements.
Included are;
1 x Pump Drive:
Model 7544-06
Speed 6rpm
The unit powers on and is in good cosmetic condition. We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. The pug was then removed. The motor moves smoothly.
Pump Drive Dims:
Dims: L21cm x W10cm x H11cm
1 x Pump Drive:
Model7544-20
Speed 20rpm
The unit powers on and is in good cosmetic condition. We attached our own 3amp 3-pin plug onto the cable to test if the unit powered on. The pug was then removed. The motor moves smoothly.
Pump Drive Dims:
Dims: L21cm x W10cm x H11cm
2x Masterflex Pump-Heads:
Model 7013-20
Part No. 3.358.609
1x Masterflex Norprene tubing
Model 6404-13
The unit is in good cosmetic condition. (This tubing was inside pump head (7013-20) The ballbearing mechanism was tested by hand the action felt smooth.
2x Masterflex Pump-Heads:
Model 7014-52
Part No. 3.358.609
The units are in good cosmetic condition. The ballbearing mechanism was tested by hand the action felt smooth.
Pump-Head Dims:
L6cm x W7.5cm x H8cm
£ 240.00 (ex. VAT) 1 in stock
Electrolab Multi-Channel Low Flow Rate Peristaltic Pump Lab
ITEM-24534
This Electrolab Multi-Channel Low Flow Rate Peristaltic Pump was removed from a university lab where it was surplus to requirements.
The item powers on and appears to be in working order.
It is in good, used cosmetic condition with marks from use.
£ 225.00 (ex. VAT) 1 in stock
KD Scientific Pump Cat no. 78-9100UU Model no. KDS 100 CE Lab
ITEM-20728
KD Scientific Syringe Pump Cat no. 78-9100UU Model no. KDS 100 CE
This was removed from a university lab where it was surplus to requirements.
The unit powers up but was not tested further.
It is in reasonably good cosmetic condition but has some marks from use.
£ 220.00 (ex. VAT) 1 in stock
Anthos Twin Laboratory Fluid Dispenser Type: 16 200 Lab
ITEM-24672
This Anthos Twin Laboratory Fluid Dispenser Type: 16 200 was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested.
£ POA 1 in stock
Watson Marlon 120U Pumps
ITEM-35483
This item is new in stock. Please enquire for further details.
Items 1 to 20 of 33