Miscellaneous Accessories

SPARES/REPAIR ITEM

£ 1,705.00 (ex. VAT) 1 in stock

Thermo Scientific Centrifuge Casing & Buckets H-6000/HBB-6/HLR-6 Lab

ITEM-23422

Thermo Scientific Centrifuge Shell & Buckets H-6000/HBB-6/HLR-6

This was removed from a university lab where it was surplus to requirements. There is no rotor included. this is just for the shell and the buckets.

The item is in reasonable cosmetic condition but has marks from use.

It comes with 6x Thermo Scientific Buckets - PN 44040

max. Mass: 2575g

Diameter: 95.79mm

Depth: 127.07mm

£ 700.00 (ex. VAT) 1 in stock

Sorvall Thermo 75006441K, 75006441KL Centrifuge Buckets plus 35x5ml Adaptors

ITEM-24425

Buckets:-

3 x Sorvall Heraeus 75006441 K (Lid no. 75006421)

1 x Thermo Scientific 75006441 L (Lid no. 75006421)

Adaptors:-

4 x Sorvall Heraeus Yellow bucket inserts with 35 x 5ml Tube holes

£ 590.00 (ex. VAT) 1 in stock

37 x Centrifuge Buckets, Adaptors and Lids - Beckman, Heraeus, IEC Lab

ITEM-19399

37 x Centrifuge Buckets, Adaptors and Lids - Beckman, Heraeus, IEC

These were removed from a university lab where they were surplus to requirements.

They are all in reasonably good cosmetic condition but have some marks from use. They have not been tested.

Includes:-

4 x Microplate carriers for Beckman GH 3.7 Rotors (270-453790-B)

4 x Beckman Green 15ml adaptors 14 holes (349950)

3 x 50ml adaptors 3 x 50ml holes

2 x Beckman Green 4 x 50ml holes (345371)

2 x Heraeus Instruments Microplate carriers (7586)

2 x Orange Adaptors Hole size 57mm

2 x Black IEC Adaptors (5780)

4 x Loose blue Beckman adaptors 4 x 35mm Holes(341761)

4 x Green Adaptors 2 x 11mm holes (364)

2 x Black Adaptors 2 x 9.50mm holes (365)

1 Pack of 6 Spherical-Bottom for centrifuge bottle adaptors size 61.7mm

4 x Clear bucket/adaptor lids - no make or numbers Bottom of lid width - 8.7cm

4 x Clear lids with clips - no make or numbers Bottom of lid width - 9.8cm

£ 550.00 (ex. VAT) 1 in stock

4 x Sorvall Microplate Carrier Centrifuge Plate Buckets Part No. 11779 Lab

ITEM-23995

Sorvall Plate Buckets Part No. 11779 x 4 & Sorvall Bucket Inserts Part No. 00884 x 3

They were removed from a university lab where they were surplus to requirements. They have not been tested.

£ 395.00 (ex. VAT) 1 in stock

MSE Mistral 6000 Laboratory Ultracentrifuge Rotor Bucket Inserts & Manual Lab

ITEM-18720

This MSE Mistral 6000 Laboratory Ultracentrifuge Rotor Bucket Inserts & Manual was removed from a university lab where it was surplus to requirements.

The inserts are in good condition but may have some pen marks and scuffs. None of the units have been tested.

Included are;

18 x Blue with 37 holes in each.

7 x Green with 19 holes in each.

5 x White with 19 holes in each.

3 x Red with 5 holes in each.

2 x Grey with 16 holes in each.

12 x Small tubes

1 x Larger tube

1 x Minstral 6000 Large Capacity Refrigerated Centrifuge Operating Manual.

We were unable to test the accessories.

£ 260.00 (ex. VAT) 1 in stock

4 x Sigma 13034 Swing Arm Centrifuge Rotor Buckets Lab

ITEM-23407

4 x Sigma 13034 Swing Arm Centrifuge Rotor Buckets

These were removed from a university lab where they were surplus to requirements.

They are in good cosmetic condition but have some marks from use.

£ 205.00 (ex. VAT) 1 in stock

4 x Sorvall Heraeus #6497/894 250ml Conical Centrifuge Buckets Lab

ITEM-19022

4 x Sorvall Heraeus #6497/894 250ml Conical Centrifuge Buckets

These were removed from a university lab where they were surplus to requirements.

They are in good cosmetic condition but have not been tested. All of them have plastic inserts. 3/4 have the original bags but are not sealed.

Max load 325g, max rpm 4600.

B 2360

F 938

SPARES/REPAIR ITEM

£ 190.00 (ex. VAT) 1 in stock

Job Lot of Centrifuge Rotors, Tubes & Accessories Lab

ITEM-35441

Job Lot of Centrifuge Rotors, Tubes & Accessories Lab

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

Included are;

700 x Ramboldi 7ml Bijou Plain Label PP Screw Cap Centrifuge Tubes Lab [condition: New]

700 x Wheaton Ramboldi 7ml Bijou PS Screw Cap Centrifuge Tubes Lab [condition: New]

225 x Leucosep 50ml Centrifuge Tubes (9 Packs of 25) Lab [condition: New]

2x Sorvall 00858 and 2x 00857 Centrifuge Rotor Bucket Adapters 33 x 3-5mL Lab [condition: Used]

1 x Beckman Coulter TY45Ti Laboratory Centrifuge Rotor Replacement Lid Lab [condition: Used]

24 x MSE Centrifuge Rotor Tubes 22 x 35.5 Grams 2 x 32.5 Grams 12ml lab [condition: Used]

1 x Pair of microcentrifuge rotors. [condition: Used]

1 x MSE 98.5 Grams Centrifuge Rotor Bucket [condition: Used]

1 x Unbranded Centrifuge Rotor [condition: Used]

1 x Pair of Unbranded & Unmarked Small Centrifuge Rotors [condition: Used]

1 x Centrifuge Rotor 23cm diameter, 14cm height, 8 holes (3cm diam approx) no lid [condition: Used]

2x Sorvall 11053 Centrifuge Rotor Buckets With Inserts [condition: Used]

1 x Rubber Centrifuge Rotor Stand Lab Equipment (Blue) [condition: Used]

1 x Pair of Unbranded Centrifuge Rotors [condition: Used]

1 x set of Unknown Brand Centrifuge Parts [condition: Used]

1 x Sorvall RTH-750 Swinging Bucket Centrifuge Rotor 4000Rpm (No Buckets) Lab [condition: Used]

1 x Piramoon Technologies Fiberlite F10B-6x500 Centrifuge Rotor Lab [condition: Used]

1 x Sorvall DuPont GSA Autoclavable 121°C Centrifuge Rotor 13,00rpm Lab Equipment [condition: Used]

5x Microcentrifuge / Centrifuge Rotors with Lids - 12 x 10.4mm Diameter Wells [condition: New]

1 x Beckman Coulter S5700 5700rpm Swinging-Bucket Centrifuge Rotor Lab [condition: Used]

1 x Thermo Scientific Bioshield 75002005 Centrifuge Bucket Rotor, 6000rpm, 540g Lab [condition: Used]

2 x Thermo Scientific Bioshield 600 Centrifuge Rotor 75002005, s.1493, 6000rpm [condition: Used]

1 x PTI FiberLite F8S-6x100y Fixed Angle Centrifuge Rotor Lab [condition: Used]

1 x Savant Instruments Inc RH40-12 Centrifuge Rotor Lab [condition: Used]

1 x Centrifuge Rotor with 4 x MSE Buckets & Adaptors + Lids- Mistral 2000 Lab [condition: Used]

1 x Sorvall GSA 13000RPM Max Centrifuge Rotor Lab [condition: Used]

Miscellaneous Accessories

Filters