Furnaces
Items 1 to 20 of 20
£ 4,000.00 (ex. VAT) 1 in stock
Nabertherm Furnace Model LH 120/13 With P300 Controller Lab
ITEM-38004
Nabertherm Furnace Model LH120/13 With P300 Controller
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition.
Internal Dimensions: 50 x 50 x 50cm
£ 2,030.00 (ex. VAT) 1 in stock
Limpsfield LCNP15 Natural Gas 1305 Kw Burner w/ Autoflame Control System
ITEM-37800
Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The item details are as follows:
Model LCNP15
Serial No. 01159
Manufactured 30.05.14
Output 1303Kw/hr
With Autoflame Combustion Management System
Part Nos. 2 x MM10005, Serial Nos. 12303, 12290
Siemens Ignition Transformer Type ZE 23/8.5
Dungs LGW 50 A4 pressure switch
WEG W22 7.5hp 415 volt fan motor
Caldaia A Condensazione high limit cut-off control
2.0" gas inlet pipe
No testing carried out.
£ 2,020.00 (ex. VAT) 1 in stock
Limpsfield LCNP15 Gas Burner 1305 Kw with Autoflame Control System
ITEM-37799
Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The item details are as follows:
Model LCNP15
Serial No. 01160
Manufactured 30.05.14
Output 1303Kw/hr
With Autoflame Combustion Management System
Part Nos. 2 x MM10005, Serial Nos. 12294, 12331
Siemens Ignition Transformer Type ZE 23/8.5
Dungs LGW 50 A4 pressure switch
WEG W22 7.5hp 415 volt fan motor
Caldaia A Condensazione high limit cut-off control
2.0" gas inlet pipe
£ 2,010.00 (ex. VAT) 1 in stock
Limpsfield LPN3/2051 Gas Burner 2051 KW/hr (7.0MBtu/hr)
ITEM-37791
Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The item details are as follows:
Model LPN3/2051
Serial No.01336
Manufactured 18.09.15
Output 2051 KW/hr 7.0 MBtu/hr
Dungs Control System
With Autoflame Combustion Management System
Part Nos. MM10005, MM10004 Serial Nos. 20066, 52511
WEG W22 7.5hp 415 volt fan motor
2.5" gas inlet pipe
£ 2,010.00 (ex. VAT) 1 in stock
Limpsfield Model LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System
ITEM-37798
Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The item details are as follows:
Model LCNP15
Serial No. 01162
Manufactured 30.05.14
Output 1303Kw/hr
With Autoflame Combustion Management System
Part Nos. 2 x MM10005, Serial Nos. 12272, 12302
Siemens Ignition Transformer Type ZE 23/8.5
Dungs LGW 50 A4 pressure switch
WEG W22 7.5hp 415 volt fan motor
2.0" gas inlet pipe
£ 2,000.00 (ex. VAT) 1 in stock
Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)
ITEM-37790
Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The item details are as follows:
Model LPN3/2051
Serial No. 1561
Manufactured 24.02.17
Output 2051 KW/hr 7.0 MBtu/hr
Dungs Control System
With Autoflame Combustion Management System
Part Nos. MM10005, MM10004 Serial Nos. 21267, 52981
WEG W22 7.5hp 415 volt fan motor
£ 2,000.00 (ex. VAT) 1 in stock
Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System
ITEM-37797
Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The item details are as follows:
Model LCNP15
Serial No. 01161
Manufactured 30.05.14
Output 1303Kw/hr
With Autoflame Combustion Management System
Part Nos. 2 x MM10005, Serial Nos. 12304, 12287
Siemens Ignition Transformer Type ZE 23/8.5
WEG W22 7.5hp 415 volt fan motor
Dungs LGW 50 A4 pressure switch
2.0" gas inlet pipe
£ 2,000.00 (ex. VAT) 1 in stock
Carbolite OAF 10/1 Laboratory Furnace Lab
ITEM-30224
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order up to 1200˚C.
It is in good cosmetic condition with minor marks.
£ 1,905.00 (ex. VAT) 1 in stock
Carbolite Laboratory Furnace Model - VCF 12/23 Lab
ITEM-27498
This Carbolite Laboratory Furnace Model - VCF 12/23 was removed from a university lab where it was surplus to requirements.
The unit was fitted with a 32 amp plug (not included). It is in full working order. It has been tested and fitted with a replacement temperature controller by an engineer.
It is in reasonable cosmetic condition but has some dents.
£ 1,900.00 (ex. VAT) 1 in stock
Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr with Dungs Gas Valve Train
ITEM-37793
Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The item details are as follows:
Model LPN3/2051
Serial No. 1616
Manufactured 30.06.16
Output 2051 KW/hr 7.0 MBtu/hr
Dungs gas train valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter
Caldaia A Condensazione control box with probes and a programmable thermostat to control the boiler at lower temperatures.
With Autoflame Combustion Management System
Part Nos. MM10005, MM10004 Serial Nos. 21549, 53299
TEC 5.5KW 415 volt fan motor Type 5.523TECAB35-IE3 T3A 13251-2
2.5" gas inlet pipe
£ 1,800.00 (ex. VAT) 1 in stock
Lenton Furnaces 1200˚C Tube Furnace Lab
ITEM-38009
Lenton Furnaces 1200˚C Tube Furnace
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order (thermometer not included).
It is in reasonably good cosmetic condition, with minor marks.
Serial No. 4988
Year 1996
Eurotherm 808 Controller
£ 1,520.00 (ex. VAT) 1 in stock
Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve
ITEM-37794
Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The item details are as follows:
Model LPN1/440
Serial No. 01191
Manufactured 8.08.14
Output 440 KW/hr
Dungs gas valve DMV-DLE 520/11
Autoflame Mini Mk.8 MM Combustion Management System 2 x part No. 10005 serial Nos. 12473, 12467
Hanning Elektro-Werke fan motor type OE7D2B-108 240v, 0.55KW
1.5" gas inlet pipe
£ 1,510.00 (ex. VAT) 1 in stock
Limpsfield LPN1/440 Gas Burner 440 KW/hr 1.5MBtu/hr Dungs Gas Valve
ITEM-37796
Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The item details are as follows:
Model LPN1/440
Serial No. 01190
Manufactured 8.08.14
Output 440 KW/hr
Dungs gas valve DMV-DLE 520/11
Autoflame Mini Mk.8 MM Combustion Management System 2 x part No. 10005 serial Nos. 12469, 12463
Hanning Elektro-Werke fan motor type OE7D2B-108 240v, 0.55KW
1.5" gas inlet pipe
£ 1,500.00 (ex. VAT) 1 in stock
Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr 1.5MBtu/hr Dungs Gas Valve
ITEM-37795
Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The control screen is cracked, and the glass flame viewer window is also cracked. Additionally, the top cover of the control unit is missing.
The item details are as follows:
Model LPN1/440
Serial No. 01189
Manufactured 8.08.14
Output 440 KW/hr
Dungs gas valve DMV-DLE 520/11
Autoflame Mini Mk.8 MM Combustion Management System 2 x part No. 10005 serial Nos. 12472, 12471
Hanning Elektro-Werke fan motor type OE7D2B-108 240v, 0.55KW
1.5" gas inlet pipe
£ 1,485.00 (ex. VAT) 1 in stock
Carbolite GLM 1 Muffle Furnace Lab
ITEM-35993
Carbolite GLM 1 Muffle Furnace
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order (Max temp 1200˚C).
It is in reasonably good cosmetic condition with minor marks.
£ 1,470.00 (ex. VAT) 1 in stock
Carbolite Type OAF 11/1 Ashing Muffle Furncace Lab
ITEM-35821
Carbolite Type OAF 11/1 Ashing Muffle Furncace
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order to 1100˚C.
It is in good cosmetic condition with marks from general use.
£ 1,260.00 (ex. VAT) 1 in stock
Phillip Harris LTD Carbolite CSF 1100 CSF 11/13 Furnace
ITEM-35855
Phillip Harris LTD Carbolite CSF 1100 CSF 11/13 Furnace
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order to the max of 1100˚C.
It is in reasonably good cosmetic condition with minor marks.
£ 845.00 (ex. VAT) 1 in stock
Carbolite Laboratory Furnace Type VCF 12/5 Lab
ITEM-30288
This Carbolite Laboratory Furnace Type VCF 12/5 was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order.
It is in reasonably good cosmetic condition but has some marks from use.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
Carbolite CTF 12/100 Tube Furnace Lab Spares/Repairs
ITEM-36639
Carbolite CTF 12/100 Tube Furnace
This was removed from a university lab where it was surplus to requirements.
Although it's in good cosmetic condition, the item is being sold as Spares or Repairs since it does not turn on.
£ 220.00 (ex. VAT) 1 in stock
Vecstar Tube Furnace Model: VTF7 Lab
ITEM-24827
This Vecstar Tube Furnace Model: VTF7 was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition though it has tape residue and scratches.
The item's plug has been cut off. We attached a plug to it to test it but removed it after testing.
The Eurotherm powered on and adjusted the temperature as intended.
We didn't use an external thermometer to verify the temperature as it would denature our probe.
It was set to 370˚C and reached it according to the internal thermometer. It hit 1288˚C as measured by the thermometer and was slow to rise any higher.
The opening is 3cm in diameter.
Items 1 to 20 of 20