Other Lab Equipment
Items 1 to 20 of 343

£ 20,000.00 (ex. VAT) 1 in stock
Protein Technologies Prelude Peptide Synthesis System Lab
ITEM-30855
This Protein Technologies Prelude Peptide Synthesis System is being sold on behalf of a client. It is surplus to requirements.
The unit is in full working order and the software is included. The PC is built in, and controlled by the included monitor & keyboard.
The plastic section of the ducting will be retained by the Lab, the metal section coming directly from the Prelude is included.
It is in very good cosmetic condition with only minor marks from use.

£ 19,235.00 (ex. VAT) 1 in stock
Planar NSI Near-Field Measurement System 1.5x1.5meters Scan Area
ITEM-29767
Planar NSI Near-Field Measurement System
This was removed from a university lab where it was surplus to requirements.
The system comes with HP workstation xw4100 PC with installed Antenna Measurement Software NSI2000 version 4.11.202. It also has installed National Instruments - Measurement & Automation Explorer Version 15.3. Hardlock (dongle) included
The system was not used for a few years, the technician who worked with it has retired and it was not used since.
The system is a planar near-field scanner, which measures an aperture of 1.5m x 1.5m. It is designed for high-frequency measurements of antennas. The equipment in the rack, controls the position of the probe and measurements are taken using a network analyser. These analysers are usually supplied by the customer and the one that was used with this system has been removed and is not included.

£ 14,715.00 (ex. VAT) 1 in stock
Edwards E480 Vacuum Thermal Evaporator Coating System Lab
ITEM-29696
This Edwards E480 Vacuum Thermal Evaporator Coating System was removed from a university lab where it was surplus to requirements.
The client confirmed that it was in working order prior to removal but requires a diff pump and a rotary pump.
It has not been tested at our facility.
It is in good cosmetic condition with marks from use.

£ 10,835.00 (ex. VAT) 1 in stock
Edwards E306A Thermal Evaporator Coating System Lab
ITEM-29823
This Edwards E306A Thermal Evaporator Coating System was removed from a university lab where it was surplus to requirements.
The system powers up but we were unable to test it further at our facility.
It is made up of the following modules;
1 x Edwards No.8 High Vacuum Pump Model E2M8.
1 x Edwards PR10-K.
1 x Edwards Vacuum Switch Type VSK 1.B.
1 x Edwards Vapour Pump Model EO4.
It is in good cosmetic condition but has marks from use.
No key supplied with the Item for the bottom panels.

£ 10,000.00 (ex. VAT) 1 in stock
MicroBetaTriLux Model:-1450 12 Detector 96/384 well Lab
ITEM-26377
This is being sold on behalf of a client. It is surplus to requirements.
The MicroBeta TriLux is an instrument designed for liquid scintillation or luminescence detection of samples in microplates, tubes or on filters. This system has 12 detectors and is set up for 96/384 well plates and a 16-shelf plate-loading magazine
It has been refurbished by Factory trained Engineers to the original instrument specification.
Included with it are;
3 months UK Warranty
12 Detectors
USB upgrade
Windows 10 upgrade.
PC Monitor

£ 9,030.00 (ex. VAT) 1 in stock
Leco AMA254 Mercury Analyzer with Software & Accessories Lab
ITEM-25181
This Leco AMA254 Mercury Analyzer was removed from a university lab where it was surplus to requirements.
The unit powers on and is in reasonably good cosmetic condition but there is some surface rust visible on some of the components inside the unit.
It has not been tested further.
Included with it are;
Manuals:
1x AMA254 Advanced Mercury Analyzer Operating manual
Windows version 5.03
1x LECO AMA254 Advanced Mercury Analyzer Instruction manual
Software Version 4.0X
1X ALTEC Quality Control Report on AMA254
The unit is in good cosmetic condition it is not clear if any bits of the report are missing.
CDs:
1x LECO AMA254 Mercury Analyzer
Version 4.04
Part No. 159-136-404
1x AMA254 (CD copy)
Version 5.0.3-3
Ser No. 216051145
3x LECO Coal Reference Material
contents weight 50g
Part Nos.
502-685
Sulfur % 1.16 ± 0.05
ppm Mercury 0.040 ± 0.008
502-686
Sulfur % 4.16 ± 0.14
ppm Mercury 0.065 ± 0.017
502-687
Sulfur % 2.06 ± 0.07
ppm Mercury 0.130 ± 0.011

£ POA 1 in stock
Perkin Elmer Operetta High Content Screening System
ITEM-35158
This item is new in stock. Please enquire for further details.

£ 8,890.00 (ex. VAT) 1 in stock
Advanced Analytical Fragment Analyzer Automated CE System Lab
ITEM-31907
Advanced Analytical Fragment Analyzer Automated CE System
This was removed from a university lab where it was surplus to requirements.
The unit powers up but was supplied without software so we have been unable to test it further.
It is in good cosmetic condition with minor marks from use.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 8,000.00 (ex. VAT) 1 in stock
Plasmaquest Magnetron Sputter Coating System Lab Spares/Repairs
ITEM-29697
Plasmaquest Magnetron Sputter Coating System
This was removed from a university lab where it was surplus to requirements.
The system has not been tested and we were advised by the lab that it was in unknown working condition and that parts may have been removed.
Included are;
1 x Plasmaquest ECR Power Supply.
1 x Plasmaquest AX2115 1500W Microwave Power Generator.
1 x VAT Adaptive Pressure Controller PM4.
1 x Model ACG- 5DC.
1 x Astex Model No. LS.
1 x Astex Model No. SXRH.
1 x Universal Flow Rate Indicator Model No. WVS5GM-2-A1ND-PM-1D.
1 x Warner Electric Linear Actuator Control.
We anticipate a level or refurbishment will be needed to get this system back into working order, so it is sold for spares/repairs.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 5,000.00 (ex. VAT) 1 in stock
3 x Faulty Findlay Irvine Type: 292/16 Grip Testers Spares/Repairs
ITEM-29701
3 x Faulty Findlay Irvine Type: 292/16 Grip Testers Spares/Repairs
These were removed from a university lab where it was surplus to requirements.
The items are in reasonable cosmetic condition but have not been tested. All are incomplete, missing drawbars & one is missing the Front wheel, chain & signal Processing Unit.
They are sold for spares/repairs.

£ 4,620.00 (ex. VAT) 1 in stock
Boro RLSM0150 Dynamic Vapour Sorption System with Cahn D200 Balance Lab
ITEM-20474
This Boro Dynamic Vapour Sorption System was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. The power supply for the unit has a faulty switch. An external power lead was used to test the unit.
We tested it with a digital thermometer (not included).
at 0ºC our thermometer read -0.8ºC
at 3ºC our thermometer read 1.8ºC
at 18ºC our thermometer read 16.4ºC (units internal thermometer read 18.3ºC)
Included with it are;
1 x Cahn digital recording balance
Model D200
The unit powers on and is in good cosmetic condition.
1 x Dell Monitor
Accessories:
1x box of Troemner micro weights
2x quick blow fuses (250V F2.5)
1x bullseye spirit level
5x boxes of plastic micro weights holders
1x box of 6 aluminium micro weight holders
1 x Viglen Pentium 4 PC
The unit powers on and is in good cosmetic condition but wouldn't load past the XP load screen. The main drive was put in a caddy but it wouldn't read. We removed it from the system. There is a blank hard drive in the PC.
We were not able to test the scales within the Dynamic Vapour Sorption unit due to the PC not being responsive.
Interior Dimensions:
W54cmxD30cmxH65cm

£ 4,435.00 (ex. VAT) 1 in stock
Engis 15 Precision Lapping Machine System with Accessories Lab
ITEM-34823
Engis 15 Precision Lapping Machine System with Accessories
This was removed from a university lab where it was surplus to requirements.
Items are in reasonable cosmetic condition, showing some signs of use.
The items powered on without issue - all the functions are working as intended.
2x Hyprez liquid Diamond Electronic Dispenser
S/N: AJ1245-884
S/N: AJ1245-496
4x Lapping plates
3x Liquid diamond dispensing jars
1x Holding frame for Liquid diamond dispensing jars
1x Impregnated abrasive lapping disc
3x Lapping weights
3x Conditioning rings
6x Work rings, ceramic backed
2x holding jigs
12x Lapping keys
3x Aluminium plates
1x Holding bracket
1x Aluminium circular plate

£ 4,425.00 (ex. VAT) 1 in stock
Engis 15 Precision Lapping Machine with Hyprez Dispenser & Accessories
ITEM-34824
This Engis 15 Precision Lapping Machine was removed from a university lab where it was surplus to requirements.
Items are in reasonable cosmetic condition, showing some signs of use.
The items powered on without issue - all the functions are working as intended.
1x Hyprez liquid Diamond Electronic Dispenser
S/N: AJ1245-761
3x Lapping plates
3x Liquid diamond dispensing jars
1x Holding frame for Liquid diamond dispensing jars
2x Impregnated abrasive lapping disc
3x Lapping weights
3x Conditioning rings
6x Work rings, ceramic backed
2x Aluminium holding jigs
5x Aluminium plates
3x Circular aluminium plates
1x Hexagonal threaded aluminium plate
1x Brass lapping plate
1x Holding bracket

£ 4,415.00 (ex. VAT) 1 in stock
Engis 15 Precision Lapping Machine System, Hyprez Dispenser & Parts
ITEM-34825
Engis 15 Precision Lapping Machine System, Hyprez Dispenser & Parts
This was removed from a university lab where it was surplus to requirements.
Items are in reasonable cosmetic condition, showing some signs of use.
The items powered on without issue - all the functions are working as intended.
1x Hyprez liquid Diamond Electronic Dispenser
S/N: AJ1245-886
2x Lapping plates
3x Liquid diamond dispensing jars
1x Holding frame for Liquid diamond dispensing jars
2x Impregnated abrasive lapping disc
3x Lapping weights
3x Conditioning rings
6x Work rings, ceramic backed
2x Aluminium holding jigs
4x Aluminium plates
1x Circular aluminium plate
1x Box of screws
3x Holding fixtures

£ 4,320.00 (ex. VAT) 1 in stock
YSI 2300 STAT Plus Biochemistry Analyser Model - 2300D + Accessories Lab
ITEM-28229
This YSI 2300 STAT Plus Biochemistry Analyser Model - 2300D was removed from a university lab where it was surplus to requirements.
The item powers on and is in a reasonable, used cosmetic condition. We were unable to test it at our facility.
The lab confirmed to us that it was in working order prior to being put in storage, but had been in storage for nearly 12 years.
It comes with:-
User Manual
Training File
PM Kit
4 x Thermal paper rolls
2 x Spare Bottles
Buffer Concentrate Kit
Replacement Part 023033

£ 4,145.00 (ex. VAT) 1 in stock
Packard 500TR Series Flow Scintillation Analyser D515F01 & Accessories Lab
ITEM-23476
This Packard 500TR Series Flow Scintillation Analyser was removed from a university lab where it was surplus to requirements.
The unit Powers on and is currently running 515TR BIOS version 3.11. We were unable to test it further.
It is in good cosmetic condition with only minor marks from use.
Included with it are;
1x 500TR reference manual
1x Floppy master disc FLO-ONE for windows Ver 3.65
1x External control cable
1x 24bit external control cable
1x FSA Pump retro fit kit
1x FSA 500TR Narrowbore pump Cal Instructions
2x Serial cables
1x Misc control cable
1x Flow cell LQTR 500 ul
1x Flow cell NBLQ 99 ul
1x Bag part of flow splitter 7700021
1x Bag of Homogenous option kit 7601621

£ 4,085.00 (ex. VAT) 1 in stock
Baskerville Hastelloy 265 Reactor System with Control Box Lab
ITEM-25170
This Baskerville Reactor System with Control Box was removed from a university lab where it was surplus to requirements.
The unit powers up and we were informed that it is in working order. The lab just upgraded to a newer system.
- It is an 800ml capacity Hastelloy 265 reactor that comes with temperature and pressure controllers and a stirrer shaft.
- The maximum operating T is 300 deg., but we operated it at 295 deg.
- The maximum operating pressure is 165 bars, but we didn’t go above 100 bars.
- It has an oxygen gas inlet (for oxidation reactions) and a nitrogen gas inlet for pressurising.
- The lab used it for oxidation of hydrocarbons (organic compounds) at or below the above-mentioned conditions of T and P.
- The organic compounds we used are amides and amidines. That is N-containing hydrocarbons which represent chemical wastes.
Accessories:
12x 16.30mm inner diameter washers (surface rust from general use)
9x 13.71mm inner diameter nuts
8x 16.29mm inner diameter spacers
1x filter
1x motor fan (broken) 4.7cm outer diameter
1x Rigger Jigger, 9/16W - 1/2W (surface rust from general use)\
1x Torque wrench w Stanley 24 (88-796 Cr-V) Ratchet Bit (untested)
1x Spherical domed metal unit
1x Larger spherical metal unit

£ 3,885.00 (ex. VAT) 1 in stock
Palas Solid Particle Dispenser RBG 1000 & 2 x Hauke DMA-10/1000 Diffusion Tubes
ITEM-20765
Palas Solid Particle Dispenser RGB 1000 & 2 x Hauke DMA-10/1000 Diffusion Tubes
This was removed from a university lab where it was surplus to requirements.
The set is in reasonable cosmetic condition but there are scratches and signs of wear. One of the buttons is cracked and missing its top.
The Dispenser powered on fine and it responded to inputs from the control panel but we were unable to test it further.
The diffusion tubes are untested.
The components included are as follows:
1x Solid Particle Dispenser
Model: RGB 1000
1x Unbranded diffusion tube
2x Hauke diffusion tubes
Model: DMA-10/1000

£ 3,495.00 (ex. VAT) 1 in stock
2x Waters Nano LockSpray Exact Mass Ionization Sources Code No. M951748DC1
ITEM-20778
2x Waters Nano Nano LockSpray Exact Mass Ionization Sources Code No. M951748DC1
These were removed from a university lab where they were surplus to requirements.
They are in good cosmetic condition but have marks from use.
The cables have been cut so they could not be tested.

£ 3,255.00 (ex. VAT) 1 in stock
Kruss Digital Tensiometer Model: K 10 ST Lab
ITEM-24833
This Kruss Digital Tensiometer Model: K 10 ST was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition. The paint is worn/chipped in some places. There are stains and other marks on the edges.
The item powered on fine. It responded to inputs from the dials but it couldn't be tested further.
Also included are the following:
1x Manual
1x Glass dish
1x Pyrex 0.5ml
1x Recorder wire
The extra pieces are inside the tensiometer.
Items 1 to 20 of 343