Process Equipment
Items 1 to 50 of 61
£ 25,000.00 (ex. VAT) 1 in stock
Hamilton Microlab Chemagic STAR Liquid Handling Workstation with Software
ITEM-38899
Hamilton Microlab Chemagic STAR Liquid Handling Workstation with Software
This was removed from a working lab where it was surplus to requirements.
The unit was purchased by the lab some time ago, but was only ever lightly used, if at all. It came to us in the original packaging.
With it are;
1 x Perkin Elmer Chemagic STAR Extraction unit
SN - 083
1 x Chemagic STAR Table
PN - 806102/01
SN - 7554
Dimensions - L236 W78 H81cm (with frame on top it goes up to 105cm)
Other parts:-
2 x Chemagic 24 Rod Heads
6 x RGT_CAR PN - 185436/00
2 x RGT_CAR PN - 185290/01
13 x APE_Carrier PN - 198588/01
2 x TIP_CAR PN - 182085/03
1 x APE_Carrier PN - 188039/00
10 x Tube Racks (Holds 12 x 50ml)
4 x Tube Racks (Holds 12 x 12ml)
6 x Tube Racks (Holds 32 x 12ml)
2 x Tube Racks (Holds 12 x 1ml)
2 x Tube Racks (Holds 32 x 1ml)
6 x SMP_CAR PN - 185249/00
8 x MP_CAR PN - 185248/00
2 x RGT_CAR PN - 187299/00
14 x Plate Holders
2 x Trays holding 32 parts labelled 185315
3 x CO-RE Needles
2 x PN - 198935/00
Various screws
Power Cable
Roll of waste bags
Box containing Brackets
Manuals/Software:-
Microlab STAR Line Programmer's Manual
Microlab STAR Line Operator's Manual
Chemagic STAR Installation package V2.0 Part 1
Chemagic STAR Installation package V2.0 Part 2 Medium Volume
Chemagic STAR Installation package V2.0 Part 2 High Volume
Microlab STAR Venus Two Base Package 4.3
Microlab STAR Venus Two Service Pack 1
Consumables:-
7 x Packs Hamilton CO-RE Tips 120 5ml Tips without Filters
6 x Packs Hamilton CO-RE Tips 480 High Volume Tips (1000µL) without Filters
1 x Box of 10 x 200ml Reagent Containers
1 x Box of 6 x 200ml Reagent Containers
2 x Boxes of 12 x 50ml Reagent Containers
1 x Box of 7 x 50ml Reagent Containers
2 x Boxes of 12 x 120ml Reagent Containers
1 x Box of 8 x 120ml Reagent Containers
1 x Box of 250 Perkin Elmer Disposable Tips
£ 19,500.00 (ex. VAT) 1 in stock
Tecan Fluent Model 780 Robotic Liquid Handler Year 2021 Lab
ITEM-37578
Tecan Fluent 780 Robotic Liquid Handler Year 2021
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.
The lab informed us the system was in good working order prior to removal.
Software not included.
Product details:
Model: Instrument Fluent 780
Serial No. 2108001479
REF 30042021 00
Eight injector head
40 x plate holders
Includes the following:
1 x Winmate R12L100-PCM2 monitor 30cm viewing, serial No. 2420BW023146
1 x Power supply unit 30059387, serial No. 21926675
2 x USB cables
1 x HP mouse
£ 19,450.00 (ex. VAT) 1 in stock
Tecan Fluent 780 Robotic Liquid Handler Year 2021 Lab
ITEM-37577
Tecan Fluent 780 Robotic Liquid Handler Year 2021
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.
The lab informed us the system was in good working order prior to removal.
The software is not included.
Product Details:
Model: Instrument Fluent 780
Serial No. 2108001479
REF 30042021 00
Eight injector head
40 x plate holders
Includes the following:
1 x Winmate R12L100-PCM2 monitor 30cm viewing, serial No. 2420BW023146
1 x Power supply unit 30059387, serial No. 21926675
2 x USB cables
1 x HP mouse
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 12,835.00 (ex. VAT) 1 in stock
TTP Labtech Mosquito X1 Low Volume Hit Picking Liquid Handling System Lab
ITEM-34969
TTP Labtech Mosquito X1 Low Volume Hit Picking Liquid Handling System
This unit has been professionally recertified and is in full working order. It will need to be calibrated with samples upon installation.
It is in excellent cosmetic condition with minor marks from use.
Included with it are;
1 x Dell Laptop (has Mosquito software installed)
1 x Mosquito Control Software Version 3.11.0 Disc (Includes manuals)
1 x Mosquito Quick start guide
2 x Boneco Humidifiers with power supplies
£ 10,000.00 (ex. VAT) 1 in stock
Perkin Elmer JANUS G3 Automated Workstation System Lab
ITEM-37192
Perkin Elmer JANUS G3 Automated Workstation Lab
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and working order.
Please note that the unit has shipping locks in place and should not be powered up with these in place.
The user log-in information for the included PC is available on request.
This system comprises the following:
- Perkin Elmer JANUS G3 Automated Workstation
- PC, Monitor, Keyboard & Mouse - WinPREP software installed on PC
- PerkinElmer Peri Pump
- Ducting
- 2 x Waste bottle
- Plate support tiles
- Trough holders
- NewLand Scanner
- 10 packs of conductive filter tips
- Ares 2000RT conversion rack
£ 10,000.00 (ex. VAT) 1 in stock
Perkin Elmer JANUS G3 Automated Workstation & Software Lab
ITEM-37193
Perkin Elmer JANUS G3 Automated Workstation Lab
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and working order.
Please note that the unit has shipping locks in place and should not be powered up with these in place.
The user log-in information for the included PC is available on request.
This system comprises the following:
- Perkin Elmer JANUS G3 Automated Workstation
- PC, Monitor, Keyboard & Mouse - WinPREP software installed on PC
- PerkinElmer Peri Pump
- Ducting
- 2 x Waste bottle
- 3 x Cooling tube holders
- Plate support tiles
- Trough holders
- NewLand Scanner
- 56 barcode racks
- Ares 2000RT conversion rack
£ 9,000.00 (ex. VAT) 1 in stock
Agilent Technologies G5056A Head 384ST Bravo Automated Liquid Handling Lab
ITEM-37177
Agilent Technologies G5056A Head 384ST Bravo Automated Liquid Handling
This item was removed from a university where it was surplus to requirement.
The item is in excellent cosmetic condition and has been extracted from a functioning system. We are unable to conduct testing for this item at our facility.
£ 9,000.00 (ex. VAT) 1 in stock
Agilent Technologies G5057A Head 96ST Bravo Automated Liquid Handling Lab
ITEM-37176
Agilent Technologies G5057A Head 96ST Bravo Automated Liquid Handling
This item was removed from a university where it was surplus to requirement.
The item is in excellent cosmetic condition and has been extracted from a functioning system. We are unable to conduct testing for this item at our facility.
Most recent service record
- Last Service Date: 02-03-2023
- Service Engineer Email: <a href="mailto:customercare_uk@agilent.com" rel="noopener noreferrer">customercare_uk@agilent.com</a>
£ 9,000.00 (ex. VAT) 1 in stock
Tecan Freedom Evo-2 200 Base Liquid Handler Evoware with Stand
ITEM-30233
Tecan Freedom Evo-2 200 Base
SN - 805001177
The item powers on and is in a good, used cosmetic condition.
Software:-
Tecan EVOware Dongle
Evoware Standard V2.1 SP1 CD
Instrument Software Version 6.1 SP1
Getting Started Guide
Operating Manual
Accessories/Consumables:-
2 x 10L Bottles (Waste/System Liquid)
23 x Sealed Packs TipOne Automation Tips 1000μl (96 Tips/Wafer)
23 x Sealed Packs TipOne Automation Tips 1-50μl (96 Tips/Wafer)
5 x Packs Sartorius Optifit Low Retention Refill Tips 350μl (10 x 96 per pack) 1 Packs has two tips missing
1 x Pack Tecan MCA96 Nested Disposable Tips Natural 50μl (8 x 96pcs)
2 x Packs Sartorius Optifit Tips 5000μl (100 Tips per box)
1 x Pack Eppendorf Combitips 0.5ml (4 tips left in box)
1 x Pack Star Lab Gel-Loading Pipette Tips 0.1-10μl (Qty unknown)
1 x Pack Star Lab 500μl Gilson-Type Graduated Macro Tips (Qty unknown)
1 x Tecan White case with tools
Unit dimensions - L212 W77 H102cm
Internal dimensions - L190 W74 H90cm
Table dimensions - L208 W76 H92cm
£ 8,620.00 (ex. VAT) 1 in stock
Gilson 268 Pipetmax Liquid Handler Automated Pipetting System with Accessories
ITEM-31891
This was removed from a university lab where it was surplus to requirements.
Included are;
Gilson 268 Pipetmax
Model no. 32100001
SN - 321D6A042
Unit dimensions - L63 W52 H70cm
The item powers on and is in reasonable used cosmetic condition, there are a few cracks around the unit on the perspex covers.
Windows Tablet
Model no. 32000321
SN - 66MCV22
The tablet automatically starts up Gilson Trilution Software. We have the password available on purchase.
Gilson Model GCP Dell Doc
SN - G00M-A00
3 x Gilson Dongles:-
LT3204USB PIPETMAX Docs v2 Reference Docs 1.1
LT3203USB TRILUTION micro V2 Documentation v1.2
Blue Dongle labelled Trilution
Gilson 5mm Allen Wrench (4320502)
AC Power Adaptor
Consumables:-
6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 50μl (15 x 96 Tips in Racks) Full & Sealed inside
1 x Box of Eppendorf epT.I.PS. Motion 1 - 50μl (10 x 96 Tips in Racks) 9 Sealed inside
6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 20-300μl (15 x 96 Tips in Racks) Full & Sealed inside
1 x Box of Eppendorf epT.I.PS. Motion 1 - 20-300μl (11 x 96 Tips in Racks) Sealed inside
16 x Boxes of Gilson DL10 Diamond Reload Packs (960 Tips per box Volume Range 0.1 - 20μl)
1 x Box of Gilson DL10 Diamond Reload Packs (257 Tips in box Volume Range 0.1 - 20μl)
18 x Boxes of Gilson DL200 Diamond Reload Packs (960 Tips per box Volume Range 2 - 200μl)
1 x Box of Gilson DL200 Diamond Reload Packs ( 192 Tips in box Volume Range 2 - 200μl)
£ 8,000.00 (ex. VAT) 1 in stock
Tecan Freedom Evo 2 150 Base Robotic Liquid Handler With TE-Vacs Vacuum Unit Lab
ITEM-42012
Tecan Freedom Evo Robotic Liquid Handler with TE-Vacs Vacuum Unit and Accessories
This system was removed from a university lab where it was surplus to requirements.
The system is in good cosmetic condition.
The liquid handler powered on, but the vacuum unit could not be tested due to the lack of a computer control system. No further testing was carried out.
There is no PC or software included in this system.
The system comprises the following:
- Tecan Freedom Evo Unit
- Serial No.: 802001119
- Equipped with two robotic arms: one for plate handling and an eight-head injector arm
- Tecan TE-Vacs Vacuum Unit
- Serial No.: 802001120
- Aluminium stand (150 x 100 x 82cm), supplied flat-packed
Included Accessories:
- 1 x Kingston 480GB SSD internal memory storage
- 7 x Injector pump piston plungers
- 8 x Syringe head tubes
- 5 x Syringe head tube sheaths
- 8 x Insert LV Diti Standard Cone Genis Ref. 10612518
- 1 x 10-litre square plastic bottle
- 1 x 5-litre plastic bottle with 3 suction hose nipples and 1 probe
- 2 x 10-litre plastic waste and system liquid bottles
- 1 x Diti Waste and Wash Station assembly
- 6 x Coils of waste and system liquid hoses
- 1 x Tecan Te-Shake plate shaker
- 4 x Plate storage stacking towers
- 6 x 4-plate holders
- 2 x 3-plate holders
- 5 x Pipette plate holders
- 1 x Thermo Finnpipette FP-Focus MCP12 (30-300 microliters)
- 4 x Thermo Finnpipette FP-Focus (0.5-5ml)
£ 7,000.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek Fxp System + Software & Cytomat 148520 A31842 Lab
ITEM-23421
This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university lab where it was surplus to requirements.
All units are in good used cosmetic condition but they do have various signs of general use.
The system consists of:
1 x Beckman Coulter Biomek Fxp CAT No A31842.
The unit powers up and both lights illuminate Green. It was not tested any further.
The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included.
1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.
It comes with:
2 x Stacker 10 hotels.
2 x FX Stacker 10 hotels.
1 x Stacker Carousel Pendant.
The mounting plate to connect it to the Fxp is included.
It also comes with a spare Microscan, operational condition is unknown.
1 x Lenovo PC with monitor, mouse & keyboard.
It has the Biomek Version 3.3 software installed.
1 x Jun-Air 1795001 Compressor.
The system also includes quite a few plates and consumables and various connection cables.
£ 6,510.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NX S8 Laboratory Automation Workstation
ITEM-36739
Beckman Coulter Biomek NX S8 Laboratory Automation Workstation
This was removed from a university lab where it was surplus to requirements.
The system powers up, communicates with the PC and is in good working order.
It is in good cosmetic condition with minor marks from use.
Included are;
Model - Biomek NX S8
SN - 9898860170
Beckman Coulter Biomek Valve unit
Cat no. 719657
SN - 5080667
PC Accessories include:
Lenovo ThinkCentre PC - Has Biomek software version 4.1
AMW 17" LCD Monitor
Lenovo keyboard & mouse
Box of accessories/consumables includes:-
Cables
Beckman Coulter Tube Rack (Boxed)
Beckman Coulter Image MORBM33A Recovery DVD
Acronis True Image 2016 #1 Backup Solution DVD
Beckman Coulter Biomek Seal & Sample Aluminum Foil Lids
Beckman Coulter SPAN-8 P250 COND.N/S Tips (1 Rack)
2 x Beckman Coulter Modular Reservoir Quarter Module 19ml (Cat-372788)
Beckman Coulter Modular Reservoir Full Module 150ml (Cat-372784)
Beckman Reservoir holder (Cat-372795)
Beckman Capstrip (267002)
3 x Packs Blue 13mm Inserts (5 Per Pack)
3 x Packs Red 12mm Inserts (5 Per Pack)
3 x Packs Black 10mm Inserts (5 Per Pack)
1 x Pack White 11mm Inserts (5 In Pack)
Bag of mixed Tecan syringes
Back of 4 gauges
Lead Screw with nut (Ref-989458)
Elektroden EL8/4V (B-3204021)
£ 6,245.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek 4000 Liquid Handler Laboratory Automation Workstation Lab
ITEM-26794
This Beckman Coulter Biomek 4000 Liquid Handler Laboratory Automation Workstation is being sold on behalf of a university. It is surplus to requirements.
The system is in full working order. It was purchased by the university in 2014 as part of a special package for £45k+VAT. We have the original PO documentation details all parts etc.
The system is still at the universities site, but we are able to arrange delivery including international delivery. If you require anything from the instrument such as sample runs etc please let us know.
Viewings will be possible on request.
£ 6,000.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips
ITEM-38068
Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips
This was removed from a university lab where it was surplus to requirements.
The lab confirmed that although it was installed in 2011, it had never been used once and is essentially brand ne
It is in good cosmetic condition with minor marks from use.
The system includes:
Biomek NXP Workstation
Serial No. A318410608
Beckman Coulter FX Device Controller
Cat No. 719366
Serial No. 00717635AM0718110002
Beckman Coulter Accuframe
Serial No. 00717820AG0711110001
ThinkCentre PC with Windows 7
Serial No. 1S5852BL2MJWLDN9
Software:
Biomek System Install Disk v3.3
Beckman Coulter Sami Workstation Software v4.0
Beckman Coulter Recovery DVD MORBK29A
Biomek Tutorials v3.3
Accounts and Permissions v3.1
Additional parts/Accessories:
2 x Manuals Biomek NX and NXP v3.3 Tutorial
1 x Active Curtain test rod
Beckman Coulter P200 pipette tips 340 racks (96 tips/rack) in sealed boxes
1 x Roylan Developments StoragePod Dundee serial No. 000224 15 x 14 x 40cm
1 x complete front polycarbonate safety screen kit with all parts and fixings
10 x data leads
120 x 96 well plates, chimney well TC with lids
5 x workstation table fittings
9 x microplate holders
1 x pipette exchanger holder
12 x ferrite cable noise reducers
£ 5,220.00 (ex. VAT) 1 in stock
DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2 Lab
ITEM-29785
DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2
This was removed from a university lab where it was surplus to requirements.
At our facility we were only able to power it up, but we are told it was in full working order prior to removal. The only issues is that the gas struts have failed.
It is in excellent cosmetic condition with hardly any marks from use.
There are various accessories included.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 4,790.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab
ITEM-34732
Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab
This was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition. It does have various marks and signs of general use.
The robot is able to be 'homed' fine and it responds to commands via manual control. The Tiploader also works as it should. This and the gripper require an air compressor which is not included. We used one from stock to test it.
The system consists of:
1 x Beckman Coulter Biomek NXp Robot.
s/n A318410173.
Cat No A31841.
96 Well head.
1 x Beckman Coulter Tiploader.
1 x Beckman Coulter AccuFrame.
1 x Microscan MS-3 Laser (Barcode Reader)
1 x Dell Optiplex 380 PC with monitor, keyboard & mouse.
This PC is fitted with the HDD from the original Lenovo PC. The PC has the Biomek NX software installed. Version 3.3 build 14.
£ 4,245.00 (ex. VAT) 1 in stock
Redd & Whyte Preddator Liquid Handling Robot System Lab
ITEM-36367
Redd & Whyte Preddator Liquid Handling Robot System
This was removed from a university lab where it was surplus to requirements.
The unit powers up, passes all self-checks and the arm moves. It is in good cosmetic condition with minor marks from use.
There is a laptop with it, which unfortunately has had the hard drive removed and has no software. There are a lot of discs supplied but none are the control software for the system.
1x Windows XP Professional Installation CD 2002
1x Dell Monitor Software CD
1x Dell Installation Software CD
1x Windows XP Professional Installation CD, discs1, 2, 3 and 4
1x Datalogic WinHost 2.00 Configuration CD 2004
1x Moxa Networking CD
1x Windows XP Professional Guide Pamphlet
£ 4,060.00 (ex. VAT) 1 in stock
Eppendorf epMotion 5075 Liquid Handler Laboratory Automation Robot & Software
ITEM-36662
Eppendorf epMotion 5075 Liquid Handler Laboratory Automation Robot & Software
This was removed from a university lab where it was surplus to requirements.
The unit powers up and the system and the PC communicate. We were able to get the tool holder to unlock and lock. It is showing a temperature unit module 1 issue.
It is in good cosmetic condition with marks from use.
Model - epMotion 5075
SN - 5075 01005
Siemens Simatic PC
Eppendorf 6BK1800-0EP00-0AA0
Monitor not included.
£ 3,800.00 (ex. VAT) 1 in stock
Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3
ITEM-36505
Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3
This was removed from a university lab where it was surplus to requirements.
All the units power up but have not been tested further.
It is in good cosmetic condition with minor marks.
It is made up of the following modules;
1x Tecan RSP 5031 Robotic Sample Processor
S/N: 1652 JR
1x Emka STC 8808
S/N: 00454
1x Emka IOS 3
S/N: 00371
1x Emka Switching Unit
S/N: No serial number
1x Haake DC10 Circulator
Type: 003-2859
S/N: 1WDIN12879
£ 3,500.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXp Laboratory Automation Workstation Cat no. A31840 Lab
ITEM-20385
This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.
Everything powers up and the system is in good cosmetic condition with some marks from use.
There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code
'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100)
We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well.
This error makes it impossible to home the system. So it could not be tested any further.
The system comprises of;
1 x Beckman Coulter Biomek NXp Laboratory Automation Workstation
Cat no. A31840
Unit dimensions - W77 L92 H98cm
1 x IBM ThinkCentre PC
MT-M 8113-DA1
Biomek Software Version 3.3 installed.
1 x Lenovo Monitor
Type - 9227-AC1
1 x Lenovo Keyboard
1 x IBM Mouse
2 x Nalgene 2 Gallon Waste/Supply Bottles
Box of Accessories:-
Beckman Coulter AccuFrame
Beckman Coulter Vacuum Valve Unit
Power Adaptor
Various cables
8 x 2ml Tube holders (24 tube slots in each)
94 x 2ml tubes
Vacuum Manifold Base
23mm Spacer Collar PN 719751
36mm Collar
3 x Thermo Scientific 96 well 0.2ml plates.
£ 3,000.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek FXp Laboratory Automation Workstation w/ PC, Software Lab
ITEM-42194
Beckman Coulter Biomek FXp Laboratory Automation Workstation w/ PC and Software
This item was removed from a university lab where it was surplus to requirements.
The system powered on with stable status lights.
The previous client stated it was in working order when last used on: 24.05.24.
The system comprises:
- Beckman Coulter FX Device Controller
- Cat No.: 719366
- 3 x Inheco Single TEC Control
- Part Nos.: 8900031
- Serial Nos.: 2549, 2564, 2537
- Inheco Thermoshake Plate Shaker & Cooler/Heater
- Part No.: 7100146-B
- Serial No.: 3080
- Year: 2018
- Thermo Scientific Masterflex P/S Easy-Load ll Pump
- Model: 1400-1320
- Serial No.: B13001697
- Pump heads model: 956-0025
- Lenovo ThinkCentre M83 with Windows 7 PRO
- Model: S11DOO
- Serial No.: MJ03JHRD
- Lenovo ThinkVision Monitor
- Serial No.: V6-D1101
- Year: 2010
- Lenovo Keyboard and Mouse
Software and Manuals Included:
- Beckman Coulter install disks
- Masterflex P/S 1400 series operating manual
- Biomek Tutorials and setup guides
Also Included:
- Various adapters, injector pump plungers, nozzle sets, plastic bottles, holding plates, etc.
Specifications:
- Model: FXp Workstation
- Serial No.: A318440537
£ 3,000.00 (ex. VAT) 1 in stock
Thermo Scientific Multidrop Combi Type 836 With Software Spare Cassettes Lab
ITEM-38066
Thermo Scientific Multidrop Combi Type 836 With Software Spare Cassettes
This item was removed from a university where it was surplus to requirement.
It powers on and is in good cosmetic condition, we are unable to test further at our facility.
Item includes the following:
FILLit Software 1.2 for Multidrop Combi
ESW 2.00.24
Unused: small tube plastic tip dispensing cassette Cat No. 24073290
Unused: small tube metal tip dispensing cassette Cat No. 24073295
£ 3,000.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek FXP Laboratory Automation Workstation Lab
ITEM-36658
Beckman Coulter Biomek FXP Laboratory Automation Workstation
This was removed from a university lab where it was surplus to requirements.
The system has been tested and is in good working order. The tiploader was tested with a compressor (not included).
The software is installed on the PC and communicates with the system well.
Included are;
PC/Accessories:-
Dell Optiplex 380
Iiyama Prolite B2282HS
Dell PC & Mouse
Starview 4 Port USB 2.0 KVM Switch
Lots of cables (USB, Ethernet, RS232)
Other Parts:-
Beckman Coulter FX Device Controller Model - 717635
Inheco TEC Control 96
SN - 958
Powers on
Cole Parmer MasterFlex Console Drive
Model - 7520-67
SN - G07004011
Powers on
Spare Beckman Coulter AccuFrame
SPRIplate 96 - Ring (AGN - 000322)
Removable Gripper Rod (REF-394069)
4 x Spare plates
2 x Nalgene 2Gal Bottles
Box of spare plate stands
Consumables included:-
1 x Box - Greiner bio-one Cellstar 48 Well Cell Culture Plates Qty - 100
1 x Box - Beckman Coulter Biomek AP96 P250 Pipette Tips Qty - 10 Racks
2 x Boxes - Beckman Coulter P250 Tips, SPAN 8 Sterile Bar Qty - 5 Packs per box, 10 Racks per pack
1 x Box - Beckman Coulter P250 Tip, Sterile Barrier Qty - 5 packs
3 x Packs - Starlab 500ul, 96 Well assay plate Qty - 27 (2 packs of 10/1 pack of 7)
3 x Packs - Costar 3960 2ml Assembly Blocks Qty - 15
4 x Packs - Unknown Packs - Qty 20
1 x Box - Beckman SPAN 8 Tube Tool Kit
£ 3,000.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek FX Robotic Automated Liquid Handling System Lab
ITEM-34971
Beckman Coulter Biomek FX Robotic Automated Liquid Handling System
This was removed from a university lab where it was surplus to requirements.
The unit has been tested and is in good working order. The tiploader has been tested with a jun-air compressor which is not included in the sale.
The system includes a Dell Optiplex 380 running Windows XP. It has various software installed including Beckman Coulter Biomek 3.3 (Build 14)
This allows control of the Biomek FX robot. The other PC contains no Biomek software. The SATA HDD contains an old version of the Biomek software running on Windows NT.
Also Included with it are;
Stone PC - No software
Boxed Hard Drive
NEC 19" Monitor
Microsoft Keyboard
HP Mouse
Beckman Coulter Integrated Solutions CD
£ 3,000.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek FX 2 Arm Liquid Handler, Software Cytomat Hotel Lab
ITEM-21220
This Beckman Coulter BIOMEK FX Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.
The system is in full working order and was used until very recently.
Included in the system are;
The system units are in good cosmetic condition.
The system consists of the following units:
Biomek FX robotic liquid handler
Serial No. 5012580
24 plate position bed
Fitted with light curtain, two robotic heads, tip changer, Variomag Teleshake
Biomek FX Device Controller
Serial No. 4000A51063
Thermo Electron Microplate Hotel
Serial No. 40578218
With 9 x Cytomat P23 towers and 2 x Cytomat P69 towers
Cole Parmer Masterflex Console Drive with twin head bi-directional
Model 7520-c7
Cole Parmer Masterflex L/S Economy Drive with twin head
ThinkCentre PC running Windows 7 Professional and installed with Biomek Software Version 4.1
Serial No. 1S1OAGS11D00MJ0345JQ
View Sonic 17" Monitor
Model VS14768
Serial No. TT1152621348
Lenovo keyboard
Model KU-0225
Serial No. SN8134833
Lenovo mouse
Serial No. 44HM285
ALP 74cm conveyer with Microscan MS-710 barcode scanner
Serial No. FIS-0710-0010
Variomag Teleshake plate shaker with power supply
Beckman Coulter Accuframe positioner
Passed a PAT test on 11.06.24
Included:
2 x Biomek FX start-up training manuals
2 x hoses for Masterflex pumps
8 x data cables
8 x Plexiglass screen panels
10 x 719301-AA Fixed Tip Kit
8 x Ferrite cable noise screening block
5 x work bed fittings
4 x airline connectors
2 x 10 litre plastic Nalgene solvent bottles
£ 3,000.00 (ex. VAT) 1 in stock
Perkin Elmer Janus Liquid Handler Workstation AJM8001/T Varispan 8 System Lab
ITEM-31576
Perkin Elmer Janus G3 Workstation
This system was removed from a university lab where it was surplus to requirements.
The system is in good used condition, with various marks and signs of general use. Some of the VariSpan tips are slightly bent and will require replacement. The PC has WinPrep 4.9 software installed.
The robot was initialized and successfully passed an XY random 100 move test with no errors.
System consists of:
- Perkin Elmer Janus AJM8001/T Liquid Handler
- Equipped with Varispan 8 Tip Arm
- Perkin Elmer Peri Pump
- Lenovo ThinkCentre PC with keyboard, mouse, monitor, and barcode scanner
- Running Windows 7
- Perkin Elmer WinPrep 4.9 software installed (software CDs included)
- Riello UPS
- Janus Printed User Manual
Accessories included:
- 16 x Spare Tips
- 16 x Spare Tecan 20734804 Cavro Syringes
- 5 x Waste Bottles
- Various other small parts, spares, and consumables
£ 2,190.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXp Laboratory Automation Workstation Cat no. A31841 Lab
ITEM-20384
This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.
The unit appears to pretty much fully work. We have homed the axis and run a basic set of commands with it. We have a video of this working.
The Tiploader appears to be faulty as it is not accepting commands from the PC. We have verified that the cable/air and PC are communicating with the Tiploader, by connecting a known working unit to the PC. The known working unit operated fine which proved the included Tiploader to be faulty.
The system comprises of;
1 x Beckman Coulter Biomek NXp Laboratory Automation Workstation
Cat no. A31841
Unit dimensions - W77 L92 H82cm
1 x IBM ThinkCentre PC
MT-M 8143-34U
Biomek Software Version 3.3 installed.
1 x IBM ThinkVision Monitor
Type - 9417-AB1
1 x Jun-Air Compressor
Model 6
The item powers on with the compressor running.
Cosmetically it is in a good used condition.
1 x Apple Pro Keyboard
1 x Lenovo Mouse
Box of Accessories:-
Beckman Coulter AccuFrame
2 Power Adaptors
Various cables and parts
9 x 96 Well 0.5ml tube plates
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,025.00 (ex. VAT) 1 in stock
Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System
ITEM-36281
Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System
This was removed from a university lab where it was surplus to requirements.
The system powers up and connects to the included Robotics 4 software. It has been tested to home the tip loader. The UV and fan functions also work.
It is in good cosmetic condition with marks from use.
The system consists of:
1 x CAS1200 Robot
SN - A080821
1 x Dell Optiplex 380 with Monitor, Keyboard & Mouse.
Has a fresh copy of Windows XP installed and Corbett Robotics 4 software.
All leads needed are included.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,000.00 (ex. VAT) 1 in stock
Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System
ITEM-36282
Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System
This was removed from a university lab where it was surplus to requirements.
The system powers up and connects to the included Robotics 4 software. It has been tested to home the tip loader. The UV and fan functions also work.
It is in good cosmetic condition with marks from use.
The system consists of:
1 x CAS1200 Robot
SN - A110618
1 x Dell Optiplex 380 with Monitor, Keyboard & Mouse.
Has a fresh copy of Windows XP installed and Corbett Robotics 4 software.
All leads needed are included.
£ 2,000.00 (ex. VAT) 1 in stock
Art Robbins Instruments Phoenix/RE Model-600-1010-00 Lab
ITEM-41349
Art Robbins Instruments Phoenix/RE Model-600-1010-00 Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
The previous owner has notified us that the needle requires replacement.
This item includes:
- Phoenix/RE
- DeeracFluidics Spot On
- Melcor Thermoelectric Temperature Controller MTTC1410
- Various Cables and Wires
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,740.00 (ex. VAT) 1 in stock
Corbett CAS1200 Robotic Precision Liquid Handling System Automated PCR Setup Lab
ITEM-31558
Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System
This was removed from a university lab where it was surplus to requirements.
The system powers up and connects to the included Robotics 4 software. It has been tested to home the tip loader.
It is in good cosmetic condition with marks from use.
The system consists of:
1 x CAS1200 Robot
SN - A110618
1 x Dell Optiplex 380 with Monitor, Keyboard & Mouse.
Has a fresh copy of Windows XP installed and Corbett Robotics 4 software.
All leads needed are included.
£ 1,720.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek 4000 Automated Laboratory Workstation Lab
ITEM-36679
Beckman Coulter Biomek 4000 Automated Laboratory Workstation
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It was serviced in 2022 and has not been used since.
It is in excellent cosmetic condition with marks from use.
PC & Accessories:-
Lenovo ThinkCentre PC
ViewSonic 21.5" Monitor
Dell Keyboard & Mouse
PC has Biomek Software Version 4.1
Comes with a box of spare parts including cables, blocks and adaptor plates.
£ 1,500.00 (ex. VAT) 1 in stock
Thermo Scientific Versette Automated Liquid Handler Lab
ITEM-38433
Thermo Scientific Versette Automated Liquid Handler
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition, with 2 noticeable cracks present.
This item powers on, we are unable to conduct further testing at our facility.
This item was last serviced by a Thermo Scientific Engineer in April 2022.
£ 1,500.00 (ex. VAT) 1 in stock
Thermo Matrix PlateMate Plus Automated Liquid Handling System - 96 Well 30ul
ITEM-38979
Thermo Matrix PlateMate Plus Automated Liquid Handling System
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
The unit communicates with the PC and appears to be in working order.
It is in good cosmetic condition with a small chip in the casing.
Included with it are;
LG 24" Monitor
Thinkcentre PC
Lenovo Keyboard & Mouse
PC Password Letmein01
Software installed:-
Matrix ControlMate V1.3.38
Accessories:-
Control Panel
Nalgene 10L Bottle
3 x Packs of Matric D.A.R.T.s Disposable Automation Research Tips 30ul (1 sealed,2 opened)
96 well 30ul head.
£ 1,390.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek 4000 High Precision Liquid Handling System Lab
ITEM-23429
This Beckman Coulter Biomek 4000 High Precision Liquid Handling System was removed from a university lab where it was surplus to requirements.
All the units are in very good used cosmetic condition but they do have various signs of general use.
The system has been powered up and connected to the PC. We were able to get the head to go to the home position and all of the bays using the Biomek 4.1 software. It seems to be working as intended.
The lab also said it was fully operational prior to removal.
The system consists of:
1 x Beckman Coulter Biomek 4000 Main Unit.
1 x Beckman Coulter P200L Tool 1-Tip.
1 x Beckman Coulter P20 Tool 1-Tip.
1 x Beckman Coulter MP20 Tool 8-Tip.
1 x Beckman Coulter P/N 609119 5 Tool, Tool rack.
1 x Lenovo PC with Keyboard, LG Monitor and Dell Wireless Mouse.
The PC contains Biomek 4.1 software.
Various cables to connect the system up.
£ 1,255.00 (ex. VAT) 1 in stock
Thermo Scientific Matrix Hydra II Automated Liquid Handling System Lab
ITEM-23391
This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.
The system is in good cosmetic condition with marks from use. All modules power up.
We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes.
The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working.
The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal.
We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts.
The system is made up of the following;
1 x Matrix Hydra II
Cat no. 109610
1 x Matrix 2 Position Stage
1 x Apogent Discoveries Matix Hydro Pump Module
The unit powers on with all 3 Fills working.
1 x Matrix P1 Control Box
1 x Innovadyne 1-Channel Nanofill
The unit powers up.
1 x Grant Instruments Type MS1
The unit powers up.
Dell Laptop with Microsoft Mouse
Model - PP04X
Hydra II-Plus-One Control Software Version 3.1.3 Installed
The unit powers up and the software runs.
Software Discs:
Matrix Hydra II-Plus-One Control Software Version 3.1.3
Matrix Hydra II-Plus-One Control Software Version 3.1.2
SuperLogics LE Software Suite Rev 2.9
2 x Socket Installation discs
Various tubing and accessories
Operating instructions
£ 1,220.00 (ex. VAT) 1 in stock
Amersham Biosciences Ettan Spotter,PC & Software,Various Parts & Accessories Lab
ITEM-39898
Amersham Biosciences Ettan Spotter, Various Parts & Accessories
This was removed from a university lab where it was surplus to requirements.
The unit has been tested and works well.
A Windows XP PC with Ettan Digester software is included.
It is in good cosmetic condition with minor marks
Included are;
Pre-Cut Aluminium Foil Microplate Sealers - Code#: 676003 x 2
215 Utility Programs
Ettan Spotter Test Procedure
Ettan Spotter Instrument Handbook
Ettan Spotter User Manual
Ettan Spotter Safety Handbook
Ettan Digester Control Software 1.10
Calibration Plate
Calibration Tool
Distance Tool
215 Level Sensor Cable Assy
Fuse, 2.5 amp T-2.5
Clip, Extruded Cable/Tubing
Fuse Drawer 110/120V
Coupling 1/4-28, PVDF
Shielded Gsioc Cable 30"
£ 1,155.00 (ex. VAT) 1 in stock
Tecan Genesis RSP 100 Part no. 611208 Liquid Handling System Lab
ITEM-20366
This Tecan Genesis RSP 100 was removed from a university lab where it was surplus to requirements.
The unit has been tested and is in working order. We were able to control it with the included software. Some of the tips are however bent and will need replacing before the system will work properly.
It is in good cosmetic condition with minor marks from use.
It comes with:-
Novatech PC with Tecan Software -
Gemini Robotic Procedure Design Version 4.1.0.0
We have the passwords for the software and they will be provided on purchase.
Tecan Unit Dimensions - L105 x W78 x H103cm
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Beckman Coulter BioMek FXP Laboratory Automation Workstation System Faulty
ITEM-39234
Beckman Coulter BioMek FXP Laboratory Automation Workstation System
This system was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, although due to the following error; "D1 axis error:pump failed to send boot request. (0512)."
we are unable to test it further, and it is listed as Spares/Repair. We suspect the tip loader is faulty.
This error prevents the system from connecting to the software.
This system also includes the following:
- Beckman Coulter Accuframe
- Thomas 669BESUU44TFE Pump
- BioTek Valve Module
- All relevant manuals and guides
- Sami WorkStation EX Software 4.0
- Software setup guide
- 2 x 96 well tip holders with all tips present
- 2 x light curtain test rods
- Filter regulator NAW2000-N02D-C
- 2 x boxes of spare parts and replacement parts
- 9 x bottles
- pipes and connectors for bottles
- PC + Monitor
- Keyboard
- Microscan MS3
£ 900.00 (ex. VAT) 1 in stock
Tecan Genesis RSP 100/4 Genesis Liquid Handling System w/ 2200 x 1000ul Tips Lab
ITEM-37708
This Tecan Genesis RSP 100 Liquid Handling System with 2200 new 1000ul Tips was removed from a university lab where it was surplus to requirements.
The item powers on and is in good cosmetic condition, we cannot test it further at our facility as it requires connection to a PC with relevant software installed.
Includes the following:
1 x case of 96 Tecan Series Disposable Tips order No. 612 512.1
1 x Gemini Software Manual V3.10
1 x Tecan EVOware Training handbook
1 x Gemini Software Training Course booklet
1 x Genesis RSP Operating Manual
1 x Genesis Instruments Setup and Service Manual V4.1
£ 880.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab
ITEM-36280
Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab
This was removed from a university lab where it was surplus to requirements.
The unit powers up but was not tested further as there is no software with it.
It is in good cosmetic condition with minor marks.
Included with it are;
1x PC connection cable
1x Spare mounting plate
1x Bioworks opertating system manual
1x Bioworks version 1.4 release notes
1x Biomek 2000 user manual
1x Biomek 2000 quick start guide
1x Biomek 2000 installation and maintenance guide
1x Beckman plus tutorial
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 840.00 (ex. VAT) 1 in stock
CTC Analytics MXY 08-01B Liquid Handling System Lab Spares/Repairs
ITEM-20678
This CTC Analytics MXY 08-01B Liquid Handling System was removed from a university lab where it was surplus to requirements
The system powers up but has several issues.
Both robot heads start to work when powered up and they seem to go through an initialisation sequence. The dispenser for the robot on the Right drops at a point so we suspect this one probably has an issue.
Both LCD handsets appear to be faulty and the LCD displays just show a pixelated mess. The petelier does not power up at all and the display is loose.
The PC has quite a few bits of software:
Microcal Origin 7 SR4
VP Viewer 2000 Version 3.0.5
NanoDrop ND-1000 V3.1.0
We cannot tell if the robot is connected to the software. There does not appear to be any obvious way to see this.
System Parts:-
CTC Analytics MXY 08-01B
SN - 180088
MicroCal HT Microcalorimeter
Model - AutoITC
Powers on
CTC Analytics PN - MN 03-00
Stack Cooler DW
MC 04-01
SN - 3495
2 x CTC Analytics MicroCal AutoSamplers PN - MB 01-00A
2 x CTC Analytics PN - MN 01-00 - Both power on
CTC Analytics MODBUS
PN - MV 03-2A
SN - 0.0202
CTC Analytics MZ 012-00E
SN - 0239
CTC Analytics MZ 012-00E
SN - 0240
CTC Analytics MSH 02-00B
Viglen PC
NEC Monitor
Microsoft Mouse
Cherry Keyboard
All power on and work fine.
£ 750.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek 2000 Laboratory Automation Workstation
ITEM-35153
This Beckman Coulter Biomek 2000 Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.
The item powers on but is unable to be tested further without software.
The item is in a reasonable, used cosmetic condition with marks and scuffs.
It comes with a sealed box of Beckman P 20 Pipette Tips (20ul)
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 710.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXp Liquid Handling Robot Lab
ITEM-34733
Beckman Coulter Biomek NXp Laboratory Automation Workstation Spares/Repairs
This was removed from a university lab where it was surplus to requirements.
The unit is sold for spares/repairs. It is not in running order.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 700.00 (ex. VAT) 1 in stock
Beckman Coulter Biomek NXp Laboratory Automation Workstation Spares/Repairs
ITEM-34734
Beckman Coulter Biomek NXp Laboratory Automation Workstation Spares/Repairs
This was removed from a university lab where it was surplus to requirements.
The unit is sold for spares/repairs. It is not in running order.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 640.00 (ex. VAT) 1 in stock
Packard Multiprobe ll EX Robotic Liquid Handling System Lab Spares/Repairs
ITEM-38754
Packard Multiprobe ll EX Robotic Liquid Handling System
This was removed from a university lab where it was surplus to requirements.
The system powers up and operates but a fault was discovered during testing.
The report " Encoder not detected on four tip arm Z1 motor" is displayed and halts the self-test.
It is in good cosmetic condition with marks from use but is sold for spares/repairs.
Included with it are;
Dell Optiplex 745 PC running on Windows XL with WinPrep software for handling system
Dell 17" monitor
Dell windows keyboard
A collection of deck holding plates and reservoirs for handling system
Two original user manuals
Power and connecting cables
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 610.00 (ex. VAT) 1 in stock
Packard Multiprobe ll EX Robotic Liquid Handler Spares/Repairs Lab
ITEM-37595
This Packard Multiprobe ll EX Robotic Liquid Handler was removed from a university lab where it was surplus to requirements.
This item is in good cosmetic condition and powers up, unable to test further at our facility.
When tested with a PC, this item did not communicate successfully, therefore it is listed as Spares or Repairs.
The item is supplied with 2 x Packard Bioscience LTD Vacuum Bottle.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 600.00 (ex. VAT) 1 in stock
Packard Multiprobe ll EX Robotic Liquid Handler Spares/Repairs Lab
ITEM-37594
This Packard Multiprobe ll EX Robotic Liquid Handler was removed from a university lab where it was surplus to requirements.
This item is in good cosmetic condition and powers up, unable to test further at our facility.
When tested with a PC, this item did not communicate successfully, therefore it is listed as Spares or Repairs.
£ 600.00 (ex. VAT) 1 in stock
Gilson Liquid Handler Model 215 - Gilson Injection Module Model 819 System Lab
ITEM-30323
Gilson Liquid Handler Model 215 - Gilson Injection Module Model 819 System
This system was removed from a university where it was surplus to requirement.
Both units are in good cosmetic condition and powered up, we are unable to test them further at our facility.
This system includes the following:
1x Gilson Liquid Handler
Model 215
1x Gilson Injection Module
Model 819
Items 1 to 50 of 61