Commercial, IT and Miscellaneous

£ 8,000.00 (ex. VAT) 1 in stock

1958 Commer Karrier Gamecock Fire Engine Food Pizza Truck Conversion

ITEM-41735

1958 Commer Karrier Gamecock Fire Engine Food Truck Conversion

We are selling this vehicle on behalf of a client. It is surplus to requirements.

The vehicle is a non-runner and has been parked up for the last 18 months. It has been converted into a Food Truck and is installed with a pizza oven and other catering equipment.

Details on the issues are listed below;

Issue: A valve failure has occurred due to a gas conversion that was done on this truck. The gas conversion was not in use but remained connected to the combustion chamber, leading to the valve failure.

Actions if Required: Repair of the valve train and removal of gas conversion, these vehicles were not made for such conversions. It would require a new head gasket and accessories to go along with the head removal and replace affected valves without a full inspection to the engine I think that the minimal requirement to have a running truck again. These kind of repairs can only be carried out by a specialist.

Vehicle Details as per DVLA website:

Vehicle make KARRIER

Date of first registration: July 1958

Year of manufacture: 1958

Cylinder capacity: Not available

CO₂ emissions: Not available

Fuel type: PETROL

Euro status: Not available

Real Driving Emissions (RDE): Not available

Export marker: No

Vehicle status: Taxed

Vehicle colour: SILVER

Vehicle type approval: Not available

Wheelplan: 2 AXLE RIGID BODY

Revenue weight: Not available

Date of last V5C (logbook) issued: 3 February 2023

It is available for collection only from Warwick Uk.

£ 4,000.00 (ex. VAT) 1 in stock

PSS / Ramada Warehouse Shelf Racking with Boards

ITEM-41729

PSS / Ramada Warehouse Shelf Racking with Boards

Included are the following;

Uprights, which are all 90cm deep.

586cm

Qty: 6

507cm

Qty: 5

389cm

Qty: 5

Beams

278.5cm length

Qty: 226

Boards

134x89.5cm

Qty: enough for all beam levels. We're happy to supply equal boards to beams (as 2 beams per level and 2 boards per level).

Column guards and be included - 1 per upright

We are happy to sell as a split purchase or full load

Collection only from CF83 3HU

We can forklift load onto a suitable vehicle

£ 3,000.00 (ex. VAT) 1 in stock

Christie Mirage S+4K Commercial Projector

ITEM-36558

Christie Mirage S+4K Commercial Projector

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

The control buttons and remote control are fully functional and performing as intended.

£ 3,000.00 (ex. VAT) 1 in stock

Voltaire ISR-9288 Grid Director

ITEM-39219

Voltaire ISR-9288 Grid Director

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 2,995.00 (ex. VAT) 1 in stock

Iveco Eurocargo 75E16 E5 7.5t Box Automatic / Cantilever Tail Lift

ITEM-38198

Vehicle Details:

Vehicle supplied with two keys.

Service Record/Invoices Last three years.

Mileage: 423258 Km.

MoT expiry date: 30:04:25.

Two passenger seats fitted.

Reverse camera fitted.

Parking sensors fitted.

Tachograph Calibration: 23.10.2023 (New unit fitted)

Anteo Tail lift fitted.

One isolation key supplied.

Thorough Examination Tail lift: 08:01:25.

Tail Lift Dimensions: W 230cm x L 180cm.

Tail Lift Capacity: 1 ton.

Internal Dimensions: L 620cm x W 240cm x H 210cm (Door opening)

£ 2,750.00 (ex. VAT) 1 in stock

Evinrude E-Tec 40hp E40DPLAAA Outboard Boat Engine

ITEM-36130

This was removed from a university facility where it was surplus to requirements.

The unit is in full working order but has not been run since 2020.

It is in good cosmetic condition with minor marks.

£ 2,750.00 (ex. VAT) 1 in stock

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine

ITEM-36131

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine

This was removed from a university facility where it was surplus to requirements.

The unit is in full working order but has not been run since 2020.

It is in good cosmetic condition with minor marks.

£ 2,500.00 (ex. VAT) 1 in stock

3D Systems Monochrome ProJet 360 3D Printer Floor Standing w/ Consumables Lab

ITEM-41974

3D Systems Monochrome ProJet 360 3D Printer Floor Standing w/ Consumables Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. The previous client has stated it was fully functional when last used.

The table shown in the second image is not included.

Also included:

2 x 1 litre Visijet PXL Clear order No. 360434
1 x 7kg tub of ZP131 printing media powder
1 x Litre 3D Systems ZB 60 clear binder solution
1 x Data lead
1 x Small grease gun
1 x 49g tube of multi-purpose grease
1 x 59ml bottle of 3D systems cleaning solution Part 360 444
5 x Small cleaning brushes
2 x Hand scrapers

£ 2,435.00 (ex. VAT) 1 in stock

Seward Rondo Pastry Brake - Dough Sheeter Type KDWn 094

ITEM-38411

Seward Rondo Pastry Brake - Dough Sheeter

This was removed from a commercial kitchen where it was surplus to requirements.

The two pastry belts have heavy signs of wear and use

This pastry brake has been tested and all functions are working although the pastry belts are heavily worn.

Roller height lever to control thickness of pastry, between 0.5 cm and 25cm

Aluminium flour tray 48cm x 12cm x 7cm

Work height 90cm

Retractable wooden extension shelf, 60cm x 40cm

Working width 90cm, length with shelf extended 275cm, height 115cm

Storage compartment under belt area 88cm x 65cm x 65cm

£ 2,000.00 (ex. VAT) 1 in stock

Sachtler Video 15SB Camera Camcorder Carbon Fibre Tripod And Fluid Head

ITEM-41740

Sachtler Video 15SB Camera Camcorder Carbon Fibre Tripod And Fluid Head

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with no damage preventing its functionality.

Tripod Height Range: 82 - 170cm

This item includes the carry case shown in slideshow.

£ 2,000.00 (ex. VAT) 1 in stock

Stratasys Objet30 V2 Pro Desktop 3D Printer With Software 2013 Lab

ITEM-41975

Stratasys Objet30 V2 Pro Desktop 3D Printer With Software Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, the previous client reported it was fully functional when last used and was flushed of its resin.

Also included are the following:

1 x Objet30 Software and Drivers SET-2400:
1 x Objet30 Printer Ver. 30.2.1.5896
1 x Objet24/30 Studio Ver. 8.5.9.3
1 x Machine Parameters SWR-500
1 x Objet24/30 Image Disk Ver. 2.0
1 x full user manual
1 x Aten Masterview KVMP Switch Model CS-1732A Serial No. Z3D2P108BF0222
1 x Adaptor VGa to DVI Part No. 10032003
5 x Data leads
2 x Wiper blades Part No. 04280
1 x Loupe Magnification x10 Part MSC-00086
1 x Waste cape Part MSC-00063
2 x Scrapers

£ 2,000.00 (ex. VAT) 1 in stock

Foster Xtra XR 35 Blast Chiller

ITEM-44421

Foster Xtra XR 35 Blast Chillers Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, the previous client has stated it was in working order prior to removal.

These items were previously used at a catering facility, so they do not require a decontamination procedure.

SPARES/REPAIR ITEM

£ 1,980.00 (ex. VAT) 1 in stock

44 x Sony XCD-X710CR Industrial Firewire Cameras and Firewire Cables

ITEM-36556

44x Sony XCD-X710CR Industrial Firewire Cameras

43x HR F1.4/8 mm Lenses

1x 2/3" F1.4 f=6mm lens

100x 10 meter Firewire cables

S/N: UNIB CAB6T6-100

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

£ 1,500.00 (ex. VAT) 1 in stock

Newtek Tricaster TCXD455 Cs Multistandard Switcher And Control Surface

ITEM-37730

Newtek Tricaster TCXD455 Cs Multistandard Switcher And Control Surface

This system was removed from a university lab where it was surplus to requirements.

All units are in good cosmetic condition.

The Newtek Tricaster TCXD455 Cs Multistandard Switcher and Keyboard power on and communicate successfully, there is no operating system installed as there is no HDD. For this reason, the control surface could not be tested.

NEW ITEM

£ 1,500.00 (ex. VAT) 1 in stock

Christie Digital Type 1.9-3.8:1 Zoom Long Lens

ITEM-39902

Christie Digital 1.9-3.8:1 Zoom Long Lens

This was removed from a university lab where it was surplus to requirements.

The item is brand new and unused.

£ 1,240.00 (ex. VAT) 1 in stock

Bespoke House Shaped Glasgow Transport Museum Computer Desk Pod Workstation Art

ITEM-17015

This unit is being sold on behalf of a client in Glasgow.

This unit was a special commission inspired by the Glasgow Transport Museum. It is a unique, bespoke piece of furniture.

It is in very good cosmetic condition. It has a very strong well made box section chassis, painted steel legs and the top structure is made of a mixture of woods. There are three good sized lockable drawers on the rear, with keys present.

There are cable access points on the tabletops in both sections to allow cables to be run, from underneath, to any equipment that is to be used.

The unit could be split into two sections to ease removal. The access to the building for removal is good with large doors and good parking.

Viewing of the unit can be made with prior arrangements.

This is a heavy item so a van with a tail lift is recommended. We estimate it is around 350 kg.

DIMENSIONS :- 351cm (l) x 120cm (w) x 275cm (h).

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 1,135.00 (ex. VAT) 1 in stock

DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector

ITEM-25509

This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.

The unit powers up and the lamp is working but we were unable to test it with any of our equipment due to the connectors not matching.

There are a number of cables fitted to an Inline 3252HR RGBHV Distribution Amplifier/Line Driver.

Lens - Christie Digital Systems Fixed XGA/SXGA 1.2:1 Minolta

The remote control was tested and is in working order.

SPARES/REPAIR ITEM

£ 1,015.00 (ex. VAT) No longer available

Projet 3000 High-Definition 3D Modelling Professional 3D Printer - Spares Repair

ITEM-08227

Projet 3000 High-Definition 3D Modelling 3D Printer Production System

Unfortunately, this unit has a fault and so is being sold as spares repairs.

We do not know the fault, but were told that the university paid an engineer to fix it, and within a month it failed again, and they weren't really using the machine anymore so didn't see the point in maintaining it.

£ 1,000.00 (ex. VAT) No longer available

Zcorporation Spectrum Z510 3D Printer

ITEM-39176

Zcorporation Spectrum Z510 3D Printer

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

Includes:

-8 x Elga Veolia LC117 Purification Packs (expired 2019)

-12 x Elga Veolia LC101 Pretreatment Packs (expired 2019)

-2 x Elga Veolia LC117 Cartridge Packs (expired 2016 + 2010)

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Christie Mirage Model S+4K Commercial Projector Spares/Repairs

ITEM-36557

Christie Mirage Model S+4K Commercial Projector

This was removed from a university lab where it was surplus to requirements.

The unit powers up but is displaying with a green tinge. We were unable to get this to change.

The lamp has run for 780 hours.

It is sold for spares/repairs.

£ 1,000.00 (ex. VAT) 1 in stock

Christie Digital 1.9-3.8:1 Zoom Long Lens

ITEM-39901

Christie Digital 1.9-3.8:1 Zoom Long Lens

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested.

£ 1,000.00 (ex. VAT) 1 in stock

Dedotec Dedocool COOL T3 Lighting System Lab

ITEM-40944

Dedotec Dedocool COOL T3 Lighting System

This was removed from a university lab where it was surplus to requirements

The unit powers up and is in good working order.

SPARES/REPAIR ITEM

£ 985.00 (ex. VAT) 1 in stock

Thermoplan Black & White 3 CTM-RF Fully Automatic Coffee Machine Spares/Repairs

ITEM-36515

Thermoplan Black & White 3 CTM-RF Fully Automatic Coffee Machine Spares/Repairs

This was removed from a university pub where it was surplus to requirements.

The unit powers up but we were unable to test it further. The grounds drawer is missing.

The university confirmed that it may have some issues, and it has some superficial damage, but it could be refurbished.

It is sold for spares/repairs as we are fairly sure it will have issues.

£ 800.00 (ex. VAT) 1 in stock

Sony Solid-State Memory Camcorder Model-PMW-200

ITEM-44544

Sony Solid-State Memory Camcorder Model-PMW-200

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, powers on, and has been tested with an in-house charger.

Please note that it does not include a battery or charger.

It will require the following to be operational:

Sony BC-U1 or BC-U2 Charger/PSU.

And a BP-U30/U60/90 battery pack.

£ 800.00 (ex. VAT) 1 in stock

Sony Solid-State Memory Camcorder Type - PMW-200

ITEM-44545

Sony Solid-State Memory Camcorder Model-PMW-200

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, powers on, and has been tested with an in-house charger.

Please note that it does not include a battery or charger.

It will require the following to be operational:

Sony BC-U1 or BC-U2 Charger/PSU.

And a BP-U30/U60/90 battery pack.

£ 790.00 (ex. VAT) 1 in stock

DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector

ITEM-25512

This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.

The unit powers up and the lamp is working but we were unable to connect it to any of our equipment to test it further. It comes with cables and a remote control which is fully working.

Lens - Christie Digital Systems zoom XGA/SXGA 2.2-4.0:1 Minolta

£ 785.00 (ex. VAT) 1 in stock

4 x Mobili Office White Table Tops - 120 x 80 x 3cm & 100 x 80 x 3cm

ITEM-36980

4 x Mobili Office White Table Tops - 120 x 80 x 3cm & 100 x 80 x 3cm

These were removed from a working lab where they were surplus to requirements.

3 Sized - 120 x 80 x 3cm

1 Sized - 100 x 80 x 3cm (missing one of the cable hole covers)

Comes with 12 x Metal Parts (they aren't legs, some sort of support brackets/ beams) - 3 per table top.

They are not supplied with legs.

£ 750.00 (ex. VAT) 1 in stock

DJI Ronin R-16 Camera Stabilisation Gimbal System Kit

ITEM-38018

DJI Ronin R-16 Camera Stabilisation Gimbal System Kit

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order, we are unable to test it fully at our facility.

This kit includes the following:

1 x main remote controller Model NDJ6 Serial No. MP1410CK003211

1 x thumb controller and guide booklet

1 x iPad mini 2 16GB model A1489 serial No. F9FQ4T3AFCM8 with charger and USB cable

1 x battery charger Model MDA10116803000

1 x camera base plate DJI R-001 for RED/ Canon/ Blackmagic/ Nikon

2 x batteries model No. 824380-3400mAh-14.8v

1 x USB cable

1 x power leads

1 x 3-axis small rig connector

2 x type A quick release mounts

1 x accessory kit - 3 x allen keys, 4 x screws, 1 x locking tool

1 x Ronin-M hard carry case

1 x user manual

1 x stand

NEW ITEM

£ 750.00 (ex. VAT) 1 in stock

Lot of 13 New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101

ITEM-38081

Lot of 13 New Ergotron NeoFlex Desk Mount Tablet Arms

Model 45-306-101

These items were removed from a university where they were surplus to requirement.

All items are new in their original packaging.

2 of the boxes have been opened, all the rest are sealed.

Vesa mounting interface 100 x 100mm and 70 x 70mm

Max load 1.1 Kg

£ 710.00 (ex. VAT) 1 in stock

Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 520 MVB Tripod

ITEM-41742

Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 520 MVB Tripod

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The unit has been etched with the previous owner's identity. This has been hidden from the photos to protect the client.

Also included are the following:

1 x Charger Power Adapter CA-930 No. CAG

1 x Manfrotto 520MVB tripod and head No. 520MVB/KJ05

1 x Shoulder soft carry bag for the camera

1 x Shoulder soft carry bag for tripod

1 x Power lead

1 x Data transfer cable

1 x Lens cap

£ 710.00 (ex. VAT) 1 in stock

Canon XF305 HD PAL Video Camera Camcorder Kit With Shoulder Rig

ITEM-41744

Canon XF305 HD PAL Video Camera Camcorder Kit With Shoulder Rig

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in full working order.

Also included are the following:

1 x Charger Power Adapter

No. BAC

1 x Battery Pack BP-975 Serial No. 201106 C

1 x shoulder rig, fully adjustable, unknown manufacturer

1 x Shoulder soft carry bag

1 x Power lead

1 x Data transfer cable

1 x Lens cap

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine (Missing Propeller)

ITEM-36238

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine (Missing Propeller)

This was removed from a university marine department. It was surplus to requirements.

Included are;

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine with Gearbox

Model: E40DPLIIS

Serial#: 05306542

The item appears to be in reasonably good condition.

It is missing the propeller and is possibly missing additional elements but we are unable to confirm.

The engine Cowl & Lower Engine Side Covers are Included but not assembled to the engine.

Evinrude E-Tec 40 Engine Cowl

Part#: 353643

Item is in good used cosmetic condition.

Evinrude E-Tec 40 Port Side Lower Engine Side Cover Left

Part1#: 350 499

Part2#: 350 809

Part3#: 350 603

Evinrude E-Tec 40 Port Side Lower Engine Side Cover Right

Part1#: 350 498

Part2#: 350 652

Part3#: 350 8608

Item is in good used cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Canon Microprinter 90 Microfiche Microfilm Reader and Printer Lab

ITEM-37719

This Canon Microprinter 90 Microfiche Microfilm Reader and Printer was removed from a university lab where it was surplus to requirements.

This item is in good cosmetic condition and powers up, but we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt Box

ITEM-38019

Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt Box

Shoulder Plate Kit

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, we are unable to test it further at our facility.

The kit includes the following:

1 x monitor arm

1 x tripod mount

1 x 80mm lens adaptor

1 x 95mm lens adaptor

1 x follow focus handle

1 x hard carry case

1 x 40cm steer whip

1 x 50cm steer whip

1 x top hand grip

1 x 0.5M pitch gear

1 x 0.6M pitch gear

1 x lens supporter

2 x allen keys

2 x 10cm rods

1 x nun's knickers

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Calder Pegasus EF Control Unit V2.291 Fusion Welder Spares/Repairs

ITEM-39199

Calder Pegasus EF Control Unit V2.291 Fusion Welder

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has actually never been used, but due to the fact it has been powered up over a year ago, it is now out of service, and will need to be serviced before it can be used again.

For this reason it is sold for spares/repairs

£ 700.00 (ex. VAT) 1 in stock

Optikinetics Opti GoBoShow Projector

ITEM-39904

This Optikinetics Opti GoBoShow Projector was removed from a university lab where it was surplus to requirements.

The item's cosmetic condition is very good.

It is fully operational with the lamp functioning correctly.

£ 700.00 (ex. VAT) 1 in stock

Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 755XB Tripod

ITEM-41741

Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 755XB Tripod

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in full working order.

All items included are as follows:

1 x battery BP-970G Serial No. 201311
Charger Power Adapter CA-930 No. BCC
Manfrotto 755XB tripod and head No. A3289340 (Height from 70cm to 149cm)
Shoulder soft carry bag for camera
Shoulder soft carry bag for tripod
Power lead
Data transfer cable
Lens cap

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44400

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. it will likely need a service before it can be used again.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44403

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years.

It will require a service.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44404

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years and it would require servicing before use.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Sound Engineering Rack with Mixing Modules TDT Tucker Davies Technologies Lab

ITEM-44972

TDT Tucker Davis Technologies Audio Processing System

This system was removed from a university lab where it was surplus to requirements.

All units power on but have not been tested further. The system includes a number of cables.

Modules (Front, Top to Bottom):

System ID 3035

MA3 Stereo Microphone Amp
RP2.1 Enhanced Real Time Processor
PA5 Programmable Attenuator
SM5 Signal Mixer

System ID 2901

MA3 Stereo Microphone Amp
RP2.1 Enhanced Real Time Processor
PA5 Programmable Attenuator
SM5 Signal Mixer

Back Units:

Daxten Scout Combo
Parasound Zamp v.3 Zone Amplifier

All items are in good cosmetic condition.

£ 690.00 (ex. VAT) 1 in stock

Canon XF305 HD Video Camera Camcorder With Tripod

ITEM-38024

Canon XF305 HD Video Camera Camcorder With Tripod

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and good working order, we are unable to test it fully at our facility.

The unit has been etched with the previous owner's identity. This has been hidden from the photos to protect the client.

Batteries, case & tripod included.

No charger included.

£ 640.00 (ex. VAT) 1 in stock

Pitco 35C+ 16 Ltr Tube Fired Gas Commercial Deep Fat Fryer

ITEM-38890

Pitco 35C+ 16 Ltr Tube Fired Gas Commercial Deep Fat Fryer

This was removed from a university catering department. It was surplus to requirements.

The unit has not been tested as we do not have a gas supply at our facility.

It is in reasonably poor cosmetic condition and is in need of a deep clean, and some maintenance.

£ 620.00 (ex. VAT) 1 in stock

Canon XF305 HD PAL Video Camera Camcorder and Charger_Power Adapter

ITEM-37739

Canon XF305 HD Video Camera with Charger w/ Power Adapter

This Video Camera was removed from a university lab where it was surplus to requirements.

The item is in reasonably good cosmetic condition and is in full working order.

Accessories included:

Carry Bag

Power lead

Data transfer cable

Lens cap

£ 615.00 (ex. VAT) No longer available

Canon Model XF305 HD PAL Video Camera Camcorder w/ Charger / Power Adapter

ITEM-37738

Canon XF305 HD Video Camera with Charger w/ Power Adapter

This Video Camera was removed from a university lab where it was surplus to requirements.

The item is in reasonably good cosmetic condition and is in full working order.

Accessories included:

Carry Bag

Power lead

Data transfer cable

Lens cap

£ 605.00 (ex. VAT) 1 in stock

Canon XF305 HD PAL Video Camcorder with Charger and Power Adapter

ITEM-37736

Canon XF305 HD Video Camera with Charger w/ Power Adapter

This Video Camera was removed from a university lab where it was surplus to requirements.

The item is in reasonably good cosmetic condition and is in full working order.

Accessories included:

Power lead

Data transfer cable

Lens cap

£ 600.00 (ex. VAT) 1 in stock

28 x Dell PowerEdge 1950 Model EMU01 Computer Server Blade Rack + Rails

ITEM-14477

These were removed from a university where it was surplus to requirements.

The units power up but have not been tested further. There are warning errors due to no drives being inserted.

The units are all in good cosmetic condition.

£ 600.00 (ex. VAT) 1 in stock

Canon XF305 HD Video Camera with Charger w/ Power Adapter

ITEM-37731

Canon XF305 HD Video Camera with Charger w/ Power Adapter

This Video Camera was removed from a university lab where it was surplus to requirements.

The item is in reasonably good cosmetic condition and is in full working order.

Accessories included:

Carry Bag

Power lead

Data Cable

£ 595.00 (ex. VAT) 1 in stock

Canon XF305 HD Video Camera with Charger - Power Adapter

ITEM-37732

Canon XF305 HD Video Camera with Charger w/ Power Adapter

This Video Camera was removed from a university lab where it was surplus to requirements.

The item is in reasonably good cosmetic condition and is in full working order.

Accessories included:

Carry Bag

Power lead

Data Cable

£ 590.00 (ex. VAT) 1 in stock

Canon XF305 HD Video Camera Camcorder with Charger - Power Adapter

ITEM-37733

Canon XF305 HD Video Camera with Charger w/ Power Adapter

This Video Camera was removed from a university lab where it was surplus to requirements.

The item is in reasonably good cosmetic condition and is in full working order.

Accessories included:

Carry Bag

Power lead

Lens cap

Transfer lead

Commercial, IT and Miscellaneous

Filters