Large Static Catering Trailer Street Food + Refrigerators & Appliances

This was removed from a university lab where it was surplus to requirements.

It is equipped with the following appliances:

3 X Lec Under Counter Fridges-untested

1 X Tefcold Tall Glass Doored Fridge-untested

1 X Jbg2 Lsu03 Counter/serve Over Fridge-untested

Double Round Sinks With Mixer Tap-untested

Large Fresh Water Storage Tank-untested

Strip Lighting-untested

Many Double 240v Sockets-untested

This unit is untested and would require to be fully checked out by a qualified electrician. The water tank will need to be flushed and treated. The unit does require some remedial repairs to the walls due to water ingress at the base corners. One of the LEC fridges requires a new door hinge.

A lot of the damage is superficial and is just down to the graphics peeling off. Overall it is in good condition but would benefit from a deep clean.

The electrics are currently via a 415V 32A connection. However, there are no three-phase appliances or outlets in the unit and this could be altered to a 240V 32A plug very easily.

We don't have the keys to the door or the water filler cap though there are keys present to lock the fridge doors. Due to its size and weight, a lorry equipped with a hiab or a large forklift with extended forks is required to move the unit.

This Necta StarFood Refrigerated Vending Machine was removed from a university lab where it was surplus to requirements.

The item powers on with LCD screen coming on but reading 'Out of service - Failure List Coin Mechanism'. The auto-configuration starts when switched on with drawers rotating. The compressor runs.

We think it is showing a coin mech fail likely because there isn't one fitted. The university removed the card machine before it was collected which is likely causing this. Replace that and it will work again.

The university said it was fully working prior to removal.

The item is in a reasonable, used cosmetic condition, but the bottom vent at the front appears a little damaged and out of place.

The lock has been removed and a new barrel will be needed.

HCK Hot and Cold Catering Servery Buffet Units

These were removed from a university catering department where it was surplus to requirements.

The items are in very good cosmetic condition but do have some very minor marks.

We were told that the Hot Servery Unit works when it was collected, though it does seem to require some sort of external heating system for it to operate which is not present.

The Cold Servery Unit was powered on fine. We tested the temperature. It has reached a temperature range from 2-4˚C. We used a digital thermometer to check the accuracy of the unit. It seems to be working well.

The Hot Servery Unit dimensions: 153x90x143 (127x51x18 - internal), 175Kg;

The Cold Servery Unit dimensions: 153x90x143 (127x51x16 - internal), 150Kg.

Both units have wheels.

IF you only require one of the units please enquire and we can discuss prices for that.

GAGGIA GD COMPACT 2 GR Coffee Machine

This was removed from a university catering department where it was surplus to requirements.

The university confirmed it was in full working order prior to removal. It was last serviced in Jan 2023.

There is no plug fitted and the unit is 3200 Watt. It will need to be hard-wired in its new location. A 13amp plug will not be sufficient.

It is in good cosmetic condition but has some marks from use.

Pair of Etna Nova Bean to Cup Coffee Machines Model no. NES121BXLHECU30

These have been removed from a university kitchen where they were surplus to requirements.

Both machines have been powered up but have not been tested further.

They are in reasonable cosmetic condition with some marks from use. They could do with a deep clean before they are used again. Neither machine has a drip tray.

Individual dimensions - L60 X W33 X H88cm

This Wetter London Food Machinery Band Saw  Model. B20 was removed from a university where it was surplus to requirements.

The unit is in good cosmetic condition with marks from general use.

We were unable to power the unit up as it had been hardwired at its previous location.

The width of the cutting table is 93cm.