Lasers
Items 1 to 20 of 27
£ 2,890.00 (ex. VAT) 1 in stock
High-Q femtoREGEN Class 4 Laser Model IC-1030-1000 Yb HR REG AMP SHG-THG Faulty
ITEM-30344
This High-Q femtoREGEN Class 4 Laser was removed from a university lab where it was surplus to requirements.
The unit is untested and was marked as faulty by the lab. An engineer inspected it, and they identified the optics, Second harmonic and third harmonic crystals were in good order. They were unable to test it further without the water circulator, though they did mention it looked like someone had been inside the pocket cell in the past.
The fault is unknown but could be something to do with the pocket cell.
The system is comprised of;
1x High-Q femtoREGEN Laser:
Model IC-1030-1000 Yb HR REG AMP SHG-THG
Inside the unit:
1x User Replaceable Diode Module (URDM #2506)
The unit is in good cosmetic condition.
1x User Replaceable Diode Module (URDM 3W/5.14A/25C/976.2nm
The unit is in good cosmetic condition.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 2,560.00 (ex. VAT) 1 in stock
Laser Quantum Finesse & FPU 35 Power Supply Lab Spares/Repairs
ITEM-23246
This Laser Quantum Finesse & FPU 35 Power Supply was removed from a university lab where it was surplus to requirements.
The power supply powers up. There is no umbilical cable included so we tested it with one from a working unit. We were unable to power the laser up.
The item is in good used cosmetic condition and comes in its original packaging.
Included are;
1 x Laser Quantum Finesse
1 x FPU 35 Power Supply
Model - Finesse 6W
It is sold for spares/repairs.
£ 2,185.00 (ex. VAT) 1 in stock
Coherent Sapphire Laser 488-200 CDRH with CDRH HP Controller Lab
ITEM-20377
Coherent Sapphire Laser 488-200 CDRH with CDRH HP Controller
This was removed from a university lab where it was surplus to requirements.
Both units power on with the laser beam working. It was tested with a spare cable from another laser which is not included.
It is in good cosmetic condition with some minor marks from use.
Controller:-
Model - Sapphire CDRH HP
Part no. 1100969 Rev. AE
Laser head:-
Model - Sapphire 488-200 CDRH
£ 2,165.00 (ex. VAT) 1 in stock
Coherent Sapphire 488-200 CDRH Laser with CDRH HP Controller Lab
ITEM-20378
Coherent Sapphire 488-200 CDRH Laser with CDRH HP Controller
This was removed from a university lab where it was surplus to requirements.
Both units power up and the laser beam is working. It was tested with a cable from another unit. It is not included.
It is in good cosmetic condition with only minor marks from use.
Controller:-
Model - Sapphire CDRH HP
Part no. 1142958 REV AB
Laser head:-
Model - Sapphire 488-200 CDRH
£ 1,015.00 (ex. VAT) 1 in stock
Genapta Laser Enable and Disable Units & Single Photon Counting Box Lab
ITEM-20725
Genapta Laser Enable and Disbale Units & Single Photon Counting Box
This system was removed from a university lab where it was surplus to requirements.
All the units power on but we were unable to test any further. They are in a reasonable used cosmetic condition with marks from use.
£ 990.00 (ex. VAT) 1 in stock
Coherent Enterprise Laser Head & Coherent Laserpure 5 Chiller Lab
ITEM-39743
Coherent Enterprise Laser Head & Coherent Laserpure 5 Chiller
This system was removed from a university lab where it was surplus to requirements.
The units both power up but have not been tested further. They are in good cosmetic condition with marks from use.
Included are;
Coherent Enterprise Laser Head Power Supply
Model: ENTCII-653
Serial#: 020775654-ENIC
Manu: July, 2002
Coherent Laserpure 5 Heat Exchanger water-to-water Laser Cooling System
Model: LP-51
Serial#: 17772
Manu: 13 May, 2002
£ 810.00 (ex. VAT) 1 in stock
Spectron Laser Systems SL805G SL805G-10 Laboratory Laser System Lab Faulty
ITEM-35524
Spectron Laser Systems SL805G SL805G-10 Laboratory Laser System
This was removed from a university lab where it was surplus to requirements.
The unit fails visual PAT testing as the power cable has been taped. It is sold for spares/repairs.
£ 630.00 (ex. VAT) 1 in stock
Klastech C3.78 Laser Controller with XP AED100US19 Power Supply Lab
ITEM-25592
Klastech C3.78 Laser Controller with XP AED100US19 Power Supply
This was removed from a university lab where it was surplus to requirements.
Included are;
1 x Controller No. C3.78
The unit powers on and is in good cosmetic condition. The digital display is operational
1 x XP Power Supply Model AED100US19
The unit powers on and is in good cosmetic condition.
2x Eledis Keys
Model A126
The keys fit well in the barrel of the lock and switch on the unit.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 620.00 (ex. VAT) 1 in stock
Lambda Physik Laser Type - EMG 201 MSC with Controller & PSU Lab
ITEM-24466
Lambda Physik Laser Type - EMG 201 MSC
This was removed from a university lab where it was surplus to requirements.
Included are;
Laser Unit
Dimensions - L198 x W87 x H47cm
The Power Supply
Dimensions - L72 x W51 x H65cm
The Laser Control
Dimensions - L50 x W50 x H15cm
All connected together, the item powers on but it wasn't tested any further at our facility. The lab reported it was faulty but were unable to confirm the nature of the fault.
It comes with the Instruction Manual.
The item is in a reasonable, used cosmetic condition.
£ 505.00 (ex. VAT) 1 in stock
Hi-Tech Scientific M300 Monochromator System - SF-61 DX2, SSU 60, CU 61 Lab
ITEM-30330
This Hi-Tech Scientific M300 Monochromator System was removed from a university lab where it was surplus to requirements.
Included in the system are;
1x Hi-Tech Scientific Monochromator:
Model M300
The unit is in good cosmetic condition. It has no power indication, so when we gave it power we were unsure if it powered up or not.
•Running hours: 500/1 ?
1x Hi-Tech Scientific Double Mixing Stopped Flow System:
Model SF-61 DX2
The unit powers on and is in good cosmetic condition.
1x TgK Scientific Shutter Control Box:
Model No. NB5729
The unit powers on and is in good cosmetic condition. The switch is responsive to the unit, the shutter opens/closes
1x Hi-Tech Scientific Controller Lab:
Model SSU 60
The unit powers on and is in good cosmetic condition.
1x Hi-Tech Scientific Control Unit:
Model CU 61
The unit powers on and is in good cosmetic condition.
The LCD screen is working and reads clearly
The dials and switches appear responsive to the unit.
2x Brandenburg Photomultiplier Modules:
Model 4479-216
The units are in good cosmetic condition.
1x TgK Scientific 'Light in' Box
Model MG-6560
The unit is in good cosmetic condition.
1x UVVIS Fibre Optic Cable:
Part No. QMMJ-55-UVVIS-550/600-3-0.8
The unit is in good cosmetic condition.
Cables:
1x 25 pin Female to PC control cable (No PC to connect the cable with)
1x 37 pin Male to Male serial cable
1x 25 pin Female to Female serial cable
1x 25 pin Male to Female serial cable
1x 15 pin Female to Female serial cable
1x 15 pin Male to Male serial cable
3x 37 pin Female to Female serial cable
1x RS232 9 pin Male to Male cable
2x 14 pin Male to Male serial cable
All the cables are in good cosmetic condition.
£ 470.00 (ex. VAT) 1 in stock
Sacher Lasertechnik Lasertex Laser System - TEC500 MLD1000 Lab
ITEM-24480
This Sacher Lasertechnik Lasertex Laser System was removed from a university lab where it was surplus to requirements.
The control unit does not power on so we were unable to test the laser. There is no key with it. We think this is how it is activated and likely why it won't power up.
It comes with a control unit to laser cable and 2 cables for computer connection. There is also a box labelled 'Security Check Box' with 2 pieces inside.
Both units are in good, used cosmetic condition.
Control Unit
Model - MLD1000
Laser
Model - TEC500
£ 375.00 (ex. VAT) 1 in stock
Spectra Physics 2020 2020-45 Laser w/ 2560 Power Supply & 2270 Control Box Lab
ITEM-23506
Spectra Physics 2020-45 Laser with 2560 Power Supply & 2270 Control Box
This system was removed from a university lab where it was surplus to requirements.
Included are;
1 x Spectra Physics Laser Model 2025-45
The unit is in good cosmetic condition but we were not able to power on the unit as it had been hardwired and disconnected from its previous location.
1 x Spectra Physics Power supply Model 2560
We were unable to power this up as it has been previously hard wired. It is in good cosmetic condition but has marks from dust and grime. The unit is supplied with Keys.
1 x Spectra Physics Control Box Model 2270
The unit is in good cosmetic condition but we were not able to power the unit as the power supply powers the unit.
£ 360.00 (ex. VAT) 1 in stock
SRS Stanford Research System NL100 Nitrogen Laser Lab
ITEM-27475
SRS Stanford Research System NL100 Nitrogen Laser
This was removed from another system.
It is in good cosmetic condition but has not been tested.
£ 340.00 (ex. VAT) 1 in stock
Coherent Sapphire 488-20 Laser Assembly with Control Board and Power Supply
ITEM-36291
Coherent Sapphire 488-20 Laser Assembly with Control Board and Power Supply
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further for safety reasons.
1x Coherent PCB control board
S/N: 70164276
1x Coherent power supply
P/N: 56260
S/N: LPD 1105375.10054
1x Connecting Cable
£ 310.00 (ex. VAT) 1 in stock
Spectra-Physics Lasers Mode 127-25R with Philips Type PW 6756/00 Power Supply
ITEM-24195
This was removed from a university lab where it was surplus to requirements.
The unit has not been tested at our facility but is in otherwise reasonably good cosmetic condition with some minor marks from use.
£ 275.00 (ex. VAT) 1 in stock
Spectra-Physics Quanta-Ray Laser Model - MOPO-710 Lab
ITEM-25462
This Spectra-Physics Quanta-Ray Laser Model - MOPO-710 was removed from a university lab where it was surplus to requirements.
The item is in a reasonable, used cosmetic condition but it has loose panels.
It has not been tested at or facility but was apparently working when last used about 5 years ago.
£ 265.00 (ex. VAT) 1 in stock
Melles Griot Laser Power Supply Model 300-001-004 Lab
ITEM-25244
This Melles Griot Laser Power Supply Model 300-001-004 was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. We could hear and feel the fan work almost immediately when powering on the unit.
There is an A126 key supplied with it.
£ 245.00 (ex. VAT) 1 in stock
Custom Built Laser System Inc Hitachi Count-10C-FC & LQC850-120E Lab
ITEM-18269
The units are in reasonably good cosmetic condition but have some marks from use.
It is largely untested, but we were able to power on Crystal Monitor Controller, Shutter Power Supply and Photodiode Amplifier Performance Tester. Nothing has been tested further.
The lot contains;
1 x Unbranded Photodiode Amplifier Performance Tester.
1 x Unbranded Crystal Monitor Controller.
1 x Unbranded Current Source Controller.
1 x Unbranded Shutter Power Supply.
1 x Unbranded J715 Optical System Bandwidth Tester.
1 x Unbranded Chip Controller.
1 x Hitachi Count-10C-FC Laser Component.
1 x Newport LQC850-120E Laser.
£ 230.00 (ex. VAT) 1 in stock
Lynton Lasers Laser Module Lab
ITEM-23276
This was removed from a university lab where it was surplus to requirements.
The unit powers on with the temperature display working on the back. No laser beam was produced. It was not tested further.
It is in reasonably good cosmetic condition with some marks from use.
There are no model/serial numbers on it. Even inside.
£ 215.00 (ex. VAT) 1 in stock
2 x Lasertron Pump Lasers for Optical Amplifier Applications PN 470102071 Lab
ITEM-25660
2 x Lasertron Pump Lasers for Optical Amplifier Applications
These were removed from a university lab where they were surplus to requirements.
They are in good cosmetic condition but have not been tested.
Part No. 470102071
Items 1 to 20 of 27