This Applikon Biotechnology Z310110010 EZ-Control Bioreactor System was removed from a university lab where it was surplus to requirements.

Included are;

Applikon Biotechnology EZ-Control Bioreactor System

Cat no. Z310110010

SN - P17561/21

The unit powers on and boots up.

Unit dimensions - L41 W37 H72cm

Parts:-

Applikon Gas Unit

Cat no. Z351026010

SN - P15698/901

Powers on

Applikon Type P100e

Cat no. Z510000010

SN - P323750/24

Trolley Dimensions - L82 W53 H96cm

Top Shelf - 80 x 50cm

Bottom Shelf - 80 x 50cm

Consumables/Accessories:-

Applikon 20L Appliflex Reusable pH & DO Sensors Cat no. Z650002040

Applikon 10L Appliflex Reusable pH & DO Sensors Cat no. Z650001040

Box of 1 x AppliSens Sensor Probe

Box of 6 x mixed AppliSens Sensor Probes

Mechaheat Jacket

Applikon Slotted Blindstopper M18 X 1.5

Applikon Impeller Marine "V"

Wika Gauge

Various probe cables

2 x Ethernet cables

Applikon Gas Outlet Bulkhead Connector Set of 8

Applikon Ribbed Blindstopper G3/4"

Various metal parts

Metal clamp

Applikon Ribbed Blindstopper M30X1

Wika Tube & Connection Gauge

Arrow Pneumatics part

Applikon Start up kit

Radleys 20 Litre Jacketed Glass Reactor Vessel with IKA Stirrer, Accessories on Stand

This system was removed from a university lab where it was surplus to requirement.

All components are in good cosmetic condition, although the inner glass surface is cloudy. There are no breaks or cracks in any of the glassware.

The IKA stirrer powers on and initiates paddle rotation. Adjusting the speed to its maximum setting of 10, the stirrer runs smoothly with only a little vibration.

Included;

1 x Radleys 20 litre jacketed glass reaction vessel with 4-port glass lid (Vessel 28cm diameter x 60cm height). Neck opening 22cm

1 x IKA Werke RW16 Basic B S2 stirrer Serial No. 01554824

1 x 15cm diameter paddle with 100cm shaft

1 x thermometer probe

1 x Radleys wheeled stand with vessel clamps 48 x 48 x 112cm (l x w x h) with 150cm stirrer support pole

2 x 2 meter lengths of M30 insulated hose with metal inner (20mm ID, 56mm OD)

1 x M30 splitter valve

This item is new in stock. Please enquire for further details.

This Ready to Process Wave 25 Bioreactor System was removed from a university lab where it was surplus to requirements.

None of the items have been tested because the power supply was not included.

The system is in good cosmetic condition with minor marks from use.

Included are;

1x GE Ready to Process CBCU

Code no.28998100

Mfg year 2015

1x GE Ready to Process Pump 25 w/ 2x pump heads

Code No. 29000704

Mfg year 2015

There is some damage to the housing of the unit on the bottom LHS of the unit -as seen in photo.

2x PumpHeads:

114DV OEM Pumpheads

Prod Nos.

113.5000.R33

Ser Nos.

66056-2

66056-3

Mfg 2015

1x Icellis Docking Station

Prod No. 820284

The unit is in good cosmetic condition

The unit has a 32 Oz Nalgene vessel,

1x PALL Life Sciences Icellis Nano lid

Ser No. P004_G_169

1x Hamilton Visiferm DO 120 Sensor:

Part no. 242450

Heat Nos.

•541742

•425755

Ser No. 026570

1x Icellis Perfusion Module w/ 2x pump heads

Prod No. 820288

Pumpheads:

102R Twin Roller low-flow

Prod No. 013.211.000

Radleys 5 Litre Jacketed Glass Reactor Vessel with IKA Stirrer, Accessories on Stand

This system was removed from a university lab where it was surplus to requirement.

All components are in fair cosmetic condition, showing some staining on the glass and light rust on the metalwork. There are no breaks or cracks in the glassware.

Please note, there is no clamp present to hold the stirrer onto the support pole. The IKA stirrer powers on and the chuck rotates. Adjusting the speed to its maximum setting of 10, the stirrer runs smoothly with only slight vibration.

The system comprises of:

1 x Radleys 5 litre jacketed glass reaction vessel with 5-port glass lid (Vessel 19cm diameter x 48cm height). Neck opening 14cm (all sizes approx)

1 x IKA Werke RW20 S5 stirrer Serial No. 307225

9 x stirrer rods with impellers

1 x thermometer probe

1 x Radleys stand with vessel clamps 46 x 46 x 80cm (l x w x h) with 120cm stirrer support pole

2 x 1 meter lengths of insulated hose with metal inner (10mm ID, 44mm OD)

Mettler Toledo LabMax Automatic Lab Reactor

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab confirmed it was in full working order prior to removal.

GE Healthcare Wave Bioreactor System 2/10 EH

This system was removed from a university lab where it was surplus to requirements.

All units power on and are in good cosmetic condition. We are unable to conduct further testing at our facility.

System comprises:

• Wave Bioreactor System 2/10 EH
• Catalog No.: 28937786
• Serial No.: 1758752
• Wave KIT2EH (48 x 30cm)
• Catalog No.: 2841154
• Serial No.: 1756133
• Wave PERFCONTE2E
• Catalog No.: 28984913
• Serial No.: 1749548
• Wave CO2MIX20
• Catalog No.: 28937795
• Serial No.: 1622798
• Filter Heaters (2 units)
• Part No.: 28411639
• Serial Nos.: 1767228
• Accessories:
• Power supply for CO2MIX20
• Cables for temperature and alarm connection to the Wave Bioreactor

Radleys Lara Controlled Laboratory Reactor CLR

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further. It is in good cosmetic condition but has some marks from use.

Wave Bioreactor System 2/10 EH Lab

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and powered up, we are unable to test this system further at our facility.

The system comprises the following:

Wave Bioreactor System 2/10 EH

BASE2/10EH

Code: 28943517

S/N: 1578302

PERFCONT2E

Code: 28943517

S/N: 1578302

CO2MIX20

Code: 28945751

S/N: 1475936

GE Healthcare Wave Bioreactor System 2/10 EH

This was removed from a lab where it was surplus to requirements.

All units power on, and with the rocker working, the temperature rises when weight is put on the sensor. The lab confirmed it was working prior to removal.

There is nothing to connect the CO2MIX unit to the main part. There is no PSU. It was tested with one from another item.

It is comprised of 5 parts.



Wave Bioreactor System 2/10 EH

Cat no. 28937786

SN - 1590291

with Wave KIT2EH (48 x 30cm)

Cat no. 28411541

SN - 1589190

Wave PERFCONTE2E

Cat no. 28984913

SN - 1590245

Wave CO2MIX20

Cat no. 28937795

SN - 1571083

Filter Heater

PN - 28411639

SN - 2498371