Incubators and Growth Chambers

£ POA 1 in stock

Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC Lab

ITEM-36845

This item is new in stock. Please enquire for further details.

£ 9,650.00 (ex. VAT) 1 in stock

CrytstalMation Rigaku Minstrel HT & Gallery 700 Incubator System Lab

ITEM-25478

This CrytstalMation Rigaku Minstrel HT & Gallery 700 Incubator System was removed from a university lab where it was surplus to requirements.

The lab retained the "phoenix" unit and the image server PC as well as the software. It was reported as otherwise fully working.

Included in the system are;

1 x Middle PC Unit:-

Model - Minstrel HT PC/Monitor

1 x Model - Minstrel HT CCU

Hours -573282

1 x Dell Power Connect 2708

Dell PC - The unit powers on and has Minstrel & Robot Programs

2 x Model - Gallery 700 Incubators

Both the units power up.

Everything powers up but the system has not been tested, the incubators need to be connected to the PC unit to be operated. Everything looks to be in good, used cosmetic condition.

The manuals are included.

RECERTIFIED ITEM

£ 8,625.00 (ex. VAT) 1 in stock

New Brunswick Innova 4430 Refrigerated Incubator Double Stack Lab

ITEM-25989

This New Brunswick Innova 4430 Refrigerated Incubator Double Stack was removed from a university lab where it was surplus to requirements.

Both units have been recertified and fully tested by a service engineer. It has had band new bearings and drive belts fitted. They have both been deep cleaned, inside and out.

They have both been tested up to 400rpm and run smoothly.

They are both in reasonably good cosmetic condition but have marks from age and usage.

£ 7,305.00 (ex. VAT) 1 in stock

New Brunswick Innova 4400 Floor Standing Shaking Incubator Double Stack Lab

ITEM-25341

New Brunswick Innova 4400 Floor Standing Shaking Incubator Double Stack

These were removed from a university lab where they were surplus to requirements.

They have been fully tested to incubate and shake by a service engineer. They are in full working order.

Inside dimensions - D57 W93 H44cm

Platform - 46 x 77cm

They come with brackets for stacking, but there are only 3 feet and one of them is broken.

RECERTIFIED ITEM

£ 6,510.00 (ex. VAT) 1 in stock

New Brunswick Innova 44 Incubator/Environmental Shaker M1282-0002 Lab

ITEM-16782

This New Brunswick Innova 44 Incubator/Environmental Shaker was removed from a university lab where it was surplus to requirements.

The unit has been tested and rebuilt by and service engineer.

It has had the following replacement parts;

Screen.

Control knob.

New mount bolt kit.

The Shaker plate assembly was stripped and rebuilt.

2 x Shaker plate pivot pins.

1 x Shaker plate top bearing.

3 x Shaker bearing.

All brand new rubber isolation washers.

All wires in the motor were cut, re-soldered & heatshrunk etc.

The unit has been tested at 400rpm (max) and the incubator is in full working order.

Included with it are;

Multiple Sized Shaker Flask Clip Kits.

Multiple Sized Screws and Washers - One bottle labelled "Green Shakers", Another labelled " Screws for flask holder".

8 x 25ml Flask Clips.

3 x Plastic bases - 1 x 10cm in diameter, 2 x 7.4cm in diameter.

3 x Alan Keys - all different sizes.

3 x Xcelite P10 5/16 Alan key drivers.

A box of Springs.

A box of small (Same size of 25ml) flask clips.

RECERTIFIED ITEM

£ 6,050.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova 44 Incubator/Shaker w/ Accessories

ITEM-24742

This New Brunswick Scientific Innova 44 was removed from a university lab where it was surplus to requirements.

The unit has been seen by a service engineer who has replaced the control pot, bearings, bearing post and shaker plate. It is in full working order.

It is in very good cosmetic condition with only minor marks from use.

M1282-0002

£ 6,000.00 (ex. VAT) 1 in stock

Kuhner Floor Standing Laboratory Incubator Shaker Model - ISF-1-W Lab

ITEM-24435

This Kuhner Floor Standing Laboratory Incubator Shaker Model - ISF-1-W was removed from a university lab where it was surplus to requirements.

Internal Dims:

D64cm x W94cm x H50cm

(Height was measured from the shaker mech to the top of the chamber).

The unit powers on with the incubator and shaker appearing to be in working order There are scratch marks on the LHS of the unit and on the bottom shelf from general use. There are surface stains and marks inside the unit and outside of the unit, from general use. There is a large crack in the inspection perspex on top of the unit that travels right across the length of it. The Perspex is double-glazed and has only cracked the outside layer.

Set temp at 37ºC our thermometer read 38.8ºC

Set temp at 40ºC our thermometer read 40.9ºC

Set temp at 80ºC our thermometer read 76.4ºC

The temperature never reached 80ºC, the unit settled on our thermometer's temperature reading, as above.

Shaking test:

• 20 min-1 (the unit ran smoothly)

• 180 min-1 (the unit ran smoothly)

•300 min-1 (the unit ran smoothly)

Included with it are;

30x small clamps with spring retainers.

Dims: L9cm x W9cm x H6cm

9x large clamps with spring retainers.

Dims: L16cm x W16cm x H9cm

£ 4,970.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC CO2 Laboratory Incubator Double Stack MCO-20AIC lab

ITEM-30524

This was removed from a university lab where it was surplus to requirements.

Both incubators power up and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order.

The incubators are in good cosmetic condition with only minor marks from use.

Top:-

Model - MCO-20AIC

SN - 01212236

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm

1 Tray - 40 x 29 x 5cm

Bottom:-

Model - MCO-20AIC

SN - 60305034

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm

£ 4,925.00 (ex. VAT) 1 in stock

Sanyo Type MCO-20AIC CO2 Laboratory Incubator Double-Stack lab

ITEM-30525

This was removed from a university lab where it was surplus to requirements.

Both incubators power up and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order.

The incubators are in good cosmetic condition with only minor marks from use.

Top:-

Model - MCO-20AIC

SN - 01212218

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm

Bottom:-

Model - MCO-20AIC

SN - 01212221

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm

£ 4,810.00 (ex. VAT) 1 in stock

RUMED 3701 Cooled Laboratory Double Door Incubator Lab

ITEM-32036

This MED 3701 Cooled Laboratory Double Door Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It was tested with a digital thermometer (not included).

It is in good cosmetic condition with minor marks from use.

Internal dimensions - L110 W70 H162cm

RECERTIFIED ITEM

£ 4,625.00 (ex. VAT) 1 in stock

Thermo Scientific MAXQ 6000 Incubator Shaker Model 4352 Lab

ITEM-30210

This Thermo Scientific MAXQ 6000 Incubator Shaker Model 4352 was removed form a university lab where it was surplus to requirements.

This unit has been recertified by a service engineer. They fitted a brand new drive belt and door catches. It has been tested and is in full working order. The Thermo temp gauge was for testing purposes only and is not included.

It is in excellent cosmetic condition with only minor marks from use.

RECERTIFIED ITEM

£ 4,105.00 (ex. VAT) 1 in stock

Thermo Scientific MAXQ 4000 Incubator Shaker Lab

ITEM-30192

This Thermo Scientific MAXQ 4000 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and has been inspected and recertified by a service engineer. It has had the following new parts fitted. It is in good working order.

2 x Gas struts.

3 x Shaker plate bearings.

1 x Drive belt.

It has also had a replacement shaker plate drive section fitted.

It is in excellent cosmetic condition with only minor marks from use.

RECERTIFIED ITEM

£ 3,700.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i CO2 Laboratory Incubator Lab

ITEM-31338

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced. It is in good working order but will require calibration once it reaches its new location. The full report is available on request.

It is in excellent cosmetic condition with minor marks from use.

Internal dimensions - L51 W47 H61cm

3 Shelves - 47 42cm

RECERTIFIED ITEM

£ 3,700.00 (ex. VAT) 1 in stock

Panasonic O2/Co2 Incubator Model - MCO-170M-PE Lab

ITEM-25330

This Panasonic O2/Co2 Incubator Model - MCO-170M-PE was removed from a university lab where it was surplus to requirements.

This has been professionally serviced and is in full working order. The engineer however didn't test the O2 function.

it is in good cosmetic condition but has some marks from use.

RECERTIFIED ITEM

£ 3,435.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i CO2 Incubator Lab

ITEM-31317

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. The report is available on request.

It is in good cosmetic condition with minor marks from use.

£ 3,350.00 (ex. VAT) 1 in stock

Barnstead Lab-Line MaxQ 4000 Incubator Shaker Model - SHKE4000-1CE

ITEM-28143

This Barnstead Lab-Line MaxQ 4000 Incubator Shaker Model - SHKE4000-1CE was removed from a university lab where it was surplus to requirements.

The unit powers up and is working. It has been assessed by an engineer who replaced the lid struts and fitted a new drive belt.

The only issue is the main power button on the front of the unit doesn't appear to work. This does not affect the operation of the unit at all. It just needs to be switched on and off at the main supply.

The incubator function was tested with a digital thermometer (not included).

The temperature was first set to 37°c. when reached temp the thermometer read 37.6°c.

The temperature was then set to its max temp of 60°c, when it reached temp, the thermometer read 58.8˚c.

RECERTIFIED ITEM

£ 3,345.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i CO2 Laboratory Incubator Lab

ITEM-31980

This Thermo Scientific Heracell 150i CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and has been fully tested. It is in full working order. It will need calibrating upon arrival at its new location.

It is in good cosmetic condition and has had a brand-new door hinge and screen fitted.

Internal dimensions - L49 W45 H60cm

3 Shelves - 46.5 x 42.5cm

RECERTIFIED ITEM

£ 3,335.00 (ex. VAT) 1 in stock

New Brunswick Innova 4400 Floor Standing Shaking Incubator Lab

ITEM-25606

New Brunswick Innova 4400 & Innova Shaking Incubator.

This was removed from a university lab where it was surplus to requirements.

The unit has been assessed by a service engineer and has had the following replacement parts fitted.

Motor.

Temperature sensor bracket.

Door mechanism.

Gas struts.

Base.

Various panels.

It has been tested at various speeds and is shaking well.

It has been temperature tested at:

37ºC - It reached this temp fine. We calibrated it with our SmartVue Thermometer (not included).

80ºC - It reached 73ºC and it was at this temperature for quite a while.

The unit is in good cosmetic condition but has marks from use.

The manual is supplied.

£ 3,160.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova 4330 Refrigerated Shaking Incubator

ITEM-29942

This New Brunswick Scientific Innova 4330 Refrigerated Shaking Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and the incubator and shaker have both been tested (digital thermometer not included). It is in full working order.

The unit is in good cosmetic condition but the lid seal is starting to detach and likely needs replacing.

Internal Dimensions - 87 x 56 x 34 cm (up to the top where the lid would seal)

RECERTIFIED ITEM

£ 3,105.00 (ex. VAT) 1 in stock

Baker ReCO2ver Plus Rapid Recovery Incubator Model - REC602-INT Lab

ITEM-31380

This Baker ReCO2ver Plus Rapid Recovery Incubator was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. It will require calibration upon installation. The full report is available on request.

It is in good cosmetic condition with minor marks from use.

Internal dimensions - L55.5 W50 H73.5cm

4 Shelves - 52 x 48cm

Incubators and Growth Chambers

Filters