Items 1 to 20 of 36

Image of item

£ 3,175.00 (ex. VAT) 1 in stock

Carbolite Laboratory Furnace Model - VCF 12/23 Lab

ITEM-27498

This Carbolite Laboratory Furnace Model - VCF 12/23 was removed from a university lab where it was surplus to requirements.


The unit was fitted with a 32 amp plug (not included). It is in full working order. It has been tested and fitted with a replacement temperature controller by an engineer.


It is in reasonable cosmetic condition but has some dents.



Image of item

£ 2,170.00 (ex. VAT) 1 in stock

Binder Double Door Laboratory Oven Model - FD 240 Lab

ITEM-19988

This Binder Double Door Laboratory Oven Model - FD 240 was removed from a university lab where it was surplus to requirements.


The unit powers on and is in good cosmetic condition. It is in full working order.


It is in good cosmetic condition with some minor marks from use. It has had a brand new control knob and thermostat fitted recently.


Inside dimensions - D50 x W80x H60cm

2 Shelves - 45 x 79cm






Image of item

£ 2,150.00 (ex. VAT) 1 in stock

Carbolite Laboratory Furnace Type VCF 12/5 Lab

ITEM-30288

This Carbolite Laboratory Furnace Type VCF 12/5 was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order.


It is in reasonably good cosmetic condition but has some marks from use.

Image of item

£ 1,750.00 (ex. VAT) 1 in stock

Carbolite LHT6/120 High Temperature Laboratory Oven Lab

ITEM-24616

Carbolite LHT6/120 High Temperature Laboratory Oven


This was removed from a university lab where it was surplus to requirements.


The unit powers up and was tested up to 400˚C. We were logged out of the nanodoc controller, and it is password protected.


The other Eurotherm controllers still allowed for control of the system.


It is in good cosmetic condition with minor marks from use.


Interior dimensions:

W45cm x D39cm x H64cm


Image of item

£ 1,525.00 (ex. VAT) 1 in stock

Carbolite ELF 10/6 Muffle Furnace lab

ITEM-35066

This Carbolite ELF 10/6 Muffle Furnace was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order.


It is in reasonably good cosmetic condition with minor marks from use.

Image of item

£ 1,475.00 (ex. VAT) 1 in stock

Carbolite Muffle Furnace ELF 10/6 Lab

ITEM-35067

This Carbolite Muffle Furnace ELF 10/6  was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order.


It is in good cosmetic condition but has some marks from use.

Image of item

£ 1,445.00 (ex. VAT) 1 in stock

Elite BSF 12/6 Laboratory Chamber Furnace Lab

ITEM-23436

Elite BSF 12/6 Laboratory Chamber Furnace


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order up to 1200˚C.


It is in good cosmetic condition with marks from use. The power cable is quite short and may need replacing depending on where it is to be used.


Max Temp: 1200ºC.

Max Cont: 1150ºC.

Chamber Dims: 127mm H x 152mm W x 305mm D.

Camber Capacity: 6L.

Max Power: 2.0 Kw


Image of item

£ 1,390.00 (ex. VAT) 1 in stock

Pyrotherm Three-Zone Tube Furnace Lab

ITEM-35056

This Pyrotherm Three-Zone Tube Furnace was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order. (Thermometer not included).


It is in good cosmetic condition with minor marks from use.


The internal dimensions are;


68x3x3cm LWH

Image of item

£ 1,145.00 (ex. VAT) 1 in stock

Vecstar Model AF2 Laboratory Tube Furnace Lab

ITEM-24116

This Vecstar Model AF2 Laboratory Tube Furnace was removed from a university lab where it was surplus to requirements.


The unit is in reasonably good cosmetic condition with some marks from use. The display is slightly faulty but is readable.


It powers up and reached 1200˚C after 3.5 hours.


Opening size: W14cm x H8cm x D30cm


Volts: 240

Amps: 17

Max Temp: 1100 K






Image of item

£ 940.00 (ex. VAT) 1 in stock

Eurotherm Carbolite EML Laboratory Furnace Lab

ITEM-31855

This Eurotherm Carbolite EML Laboratory Furnace was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order up to 1100˚C


It is in good cosmetic condition with marks from use.



Image of item

£ 935.00 (ex. VAT) 1 in stock

Carbolite Laboratory Furnace Type - VCF 12/23 lab

ITEM-27492

This Carbolite Laboratory Furnace  Type - VCF 12/23 was removed from a university lab where it was surplus to requirements.


The unit powers up but started emitting a very strong burning smell at about 70˚C so we turned it off.


It is in reasonably poor cosmetic condition




Image of item

£ 930.00 (ex. VAT) 1 in stock

Lenton Thermal Designs WF60 Laboratory Oven Lab

ITEM-35058

This was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included). It is in good working order up to 300˚C


It is in reasonably good cosmetic condition but has some burnt-on residue inside.


1 Shelf - 39 x 38cm

Image of item

£ 905.00 (ex. VAT) 1 in stock

Vecstar Tube Furnace Model: VTF7 Lab

ITEM-24827

This Vecstar Tube Furnace Model: VTF7 was removed from a university lab where it was surplus to requirements.


The item is in reasonable cosmetic condition though it has tape residue and scratches.


The item's plug has been cut off. We attached a plug to it to test it but removed it after testing.

The Eurotherm powered on and adjusted the temperature as intended.


We didn't use an external thermometer to verify the temperature as it would denature our probe.


It was set to 370˚C and reached it according to the internal thermometer. It hit 1288˚C as measured by the thermometer and was slow to rise any higher.


The opening is 3cm in diameter.




Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 855.00 (ex. VAT) 1 in stock

Lenton Three-Zone Tube Furnace PTF 12/100/940 Lab Spares/Repairs

ITEM-35055

This Lenton Three-Zone Tube Furnace PTF 12/100/940 was removed from a university lab where it was surplus to requirements.


The unit powers up and was initially working, but began to trip the electrics in our testing room at higher temperatures using the middle zone.


It is in good cosmetic condition with minor marks from use.


Max temp - 1200˚c


It is sold for spares/repairs.

Image of item

£ 790.00 (ex. VAT) 1 in stock

VWR VENTI-Line VL 115 Laboratory Drying Oven Lab

ITEM-34945

This VWR VENTI-Line VL 115 Laboratory Drying Oven was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included). It is in full working order.


It is in good cosmetic condition with marks from use.


2 Shelves - 60 x 39cm

Image of item

£ 730.00 (ex. VAT) 1 in stock

Salvis Thermocenter Laboratory Oven Type TC-40 B Lab

ITEM-19575

This Salvis Thermocenter Laboratory Oven Type TC-40 B was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included).


When set to 40˚C the thermometer measured 40.7˚C.

When set to 200˚C the thermometer measured 205.5˚C.


It is in good cosmetic condition with some surface marks on the back and the sides of the unit. It is missing two feet but could be easily replaced as they screw in.






Image of item

£ 710.00 (ex. VAT) 1 in stock

Panasonic Electric Dry Heat Sterilisation Laboratory Oven Model MOV-112-PE Lab

ITEM-25485

This Panasonic Electric Laboratory Oven Model - MOV-112-PE was removed from a university lab where it was surplus to requirements.


The item powers on, it was already set to 160˚c and it went up in temperature quickly. We were unable to change the setting so we let it run. The temperature reached 156˚c after around 10-15 minutes with the thermometer reading 150˚C.


It reached 250˚C within an hour.


It has the usual smells you would expect from this type of oven.


The digital thermometer is not included.


The item is in a reasonable, used cosmetic condition.


Inside dimensions - D48 W45 H45cm

2 Shelves - 43 x 43cm

Image of item

£ 670.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Heraeus Type-T T6030 Heating Drying Oven Lab

ITEM-30574

This Thermo Electron Corporation Heraeus T6030 Heating Drying Oven was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested at 37 & 300˚C with a digital thermometer (not included). It is in working order.


It is in reasonably good cosmetic condition with minor marks from use.


Internal dimensions - D37 W35 H23cm

1 Shelf - 36.5 x 33.5cm





Image of item

£ 605.00 (ex. VAT) 1 in stock

Salvis Laboratory Vacuum Oven Type - KVTS 11 Lab

ITEM-25454

This Salvis Laboratory Vacuum Oven  Type - KVTS 11 was removed from a university lab where it was surplus to requirements.


The unit powers up and was tested with a digital thermometer (not included)


We turned the dial up to 70˚c and it stopped heating when the thermometer read 52˚c.

We then turned the dial up fully to 150˚c and it stopped heating when the thermometer read 138.5˚c.


It is in reasonable cosmetic condition with some marks from use.


Inside dimensions - D33 W25 H25cm

1 shelf - 31 x 24.5cm




Image of item

£ 595.00 (ex. VAT) 1 in stock

Townson and Mercer - Laboratory Vacuum Oven Furnace Lab

ITEM-36054

This Townson and Mercer - Laboratory Vacuum Oven Furnace was removed from a university lab where ti was surplus to requirements.


Item is in reasonable condition with cosmetic damage and signs of age.


Item powers up, thermostat light indicator works but the mains light doesn't. The oven itself has been tested under a vacuum and is in good working order.


We were unable to turn the release valve by hand.


Items 1 to 20 of 36

Filters

Price (£)

to

Condition

Brand