Items 1 to 8 of 8

Image of item

£ 4,070.00 (ex. VAT) 1 in stock

Genetix Qpix2XT Benchtop Colony Picker with Software & Accessories

ITEM-29738

This Genetix Qpix2XT Benchtop Colony Picker was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good cosmetic condition with minor marks from use.


No PC was supplied by the lab, but it is supplied with 2 Interface cards, Genetix Q soft xp Disc & 2 x Nonlinear Dynamics Ltd Progenesis PG220 Training Discs. As well as;

1 x Microsoft Keyboard.

1 x MOBI Monitor. Model: M15MPC.

2 x Keys.


Included with the Item are:


1 x 10 ltr Jun-Air Compressor.

Model: OF302.

The unit powers up and functions correctly. It is in good cosmetic condition with marks from use.


1 x Picking Application Manual.

1 x QSoft Data Tracking Application Manual.

1 x Gridding Application Guide.

1 x QPix2xt Robot Manual.

1 x Rearraying with Stackers Application Guide.


2 x Genetix Sample Injectors.

1 x Box of Performa N3010 High-Performance positively charged-nylon membrane.

1 x Box of 2.2ml Storage plate. Cat No. AB-0661. Description: 96 Square well storage plate.

4 x Box of Genetix X6011. Up Code XGE05025. Description: 96 Square well storage plate.


Image of item

£ 2,445.00 (ex. VAT) 1 in stock

Corbett CAS1200 Robotics Pipetting Liquid Handling System with Robotics4 Lab

ITEM-19976

This Corbett Robotics Liquid Handling System Model - CAS1200 was removed from a university lab where it was surplus to requirements.


The unit powers up fine and part of the robot moves when powered and switched off.


It is in good cosmetic condition with only minor marks from use.


It comes with

9 x Packs of 96 Tips (Lot no. 110210-281)

1 x Corbett Research Block - P/N 3001-008


The unit is supplied with a Dell laptop which has Corbett Robotics4 software installed on it. It is all in good working order.

Image of item

£ 2,375.00 (ex. VAT) 1 in stock

Eppendorf epMotion 5070 Automated Pipetting Workstation + Spare Heads Lab

ITEM-20641

This Eppendorf epMotion 5070 System was removed from a university lab where it was surplus to requirements. The lab assured us the system was in fully working order with three spare pipetting heads.


The unit is in good used cosmetic condition but it does have various scrapes and scratches from general use. The rear of the unit near the IEC input appears to be a bit dented in but it does not affect the operation of the unit at all.


The unit has been powered up and the head returns to its home position. The initialisation ran fine during start-up.


It is running 6.002 Software. And apAplication 1.111.


The system consists of:


1 x Eppendorf epMotion 5070 unit.

Which is fitted with:

1 x TS1000 40-1000ul Single-Chanel Dispensing Tool and also comes with a controller pad.


It comes with the following accessories:


1 x Eppendorf Holder For 6 Dispensing Tools.

1 x Eppendorf 0.5 + Adapter/1.5/2ml

1 x Eppendorf 55mm Height Adapter.

1 x Eppendorf Thermorack CB100ul

1 x Eppendorf Module Reservoir.


3 x Extra Boxed Dispensing Heads:


1 x TS50 1-50ul Single-Chanel Dispensing Tool.

1 x TS300 20-300ul Single-Chanel Dispensing Tool.

1 x TM50-8 1-50ul Eight-Chanel Dispensing Tool.


And the following consumables:


4 x Boxes of epT.I.P.S. Motion 1 - 50ul.

Plus 2 individual units.

10 x Boxes of epT.I.P.S. Motion 20 - 300ul.

1 x Box of epMotion Reservoir 100ml.

3 x Boxes of epT.I.P.S. Motion 40 - 1000ul.

Plus 2 individual units.

Some boxes are still sealed.

Some might have had some units removed.

Image of item

£ POA 1 in stock

CyBio CyBi-Well Automated Simultaneous Pipettor System Lab

ITEM-08413

This item is new in stock. Please enquire for further details.

Image of item

£ 1,205.00 (ex. VAT) 1 in stock

GeneMachines OmniGrid Accent MGR-02 Benchtop MicroArraying Bio Printer Lab

ITEM-20043

This GeneMachines OmniGrid Accent Benchtop MicroArraying Platform Bio Printer was removed from a university lab where it was surplus to requirements.


The units all power up but have not been tested further.


Included are;


1 x OMNI GRID ACCENT Model: MGR-02


1x Gast Vacuum Pump Model: 0523-101Q-G588DX


Everything is in reasonably good cosmetic condition but the side panels have come off the omni grid.


Also included are:


1x Digital Temperature Control disk ver 2.8

1x filter

3x bags of unopened wires/cables



Image of item

£ 1,135.00 (ex. VAT) 1 in stock

Genetix Qpix2 Benchtop Colony Picker with Software & Accessories Lab

ITEM-27505

This Genetix Qpix2 Benchtop Colony Picker was removed from a university lab where it was surplus to requirements.


The lab said it was fully working prior to removal but unfortunately it seems like the dongle for the software has been misplaced.


Included are;


1 x Genetix Qpix2 Benchtop Colony Picker

Inside dims - D67 W100 H35cm

We powered up the unit but were unable to test if further.


Inside side panel of bottom unit - Jun-Air Model 400 Oil-Less Compressor - It powers on and works


1 x PC, Monitor, Keyboard & Mouse - All power on and work, the pc has the software listed below.


The item is in a reasonable, used cosmetic condition.


Manuals/Software:-

QPix2 User Manual

Replicating Application Guide

Gridding Application Guide

Picking Application Guide

QSoft Data Tracking Application Guide

QFill2 User Manual

QScan User Guide

aQuire User Guide

Discs:-

QSoft xp Build 6400.16

QSoft xp Build 6100.11

QSoft xp Build 6300.01

QScan beta 1

QP2231 (Floppy Disk)


Boxed Accessories/Consumables include:-

Metrologic Scanner

6 x Master PL-L 840/4P Light bulbs

Lots of various Slides inc. brands Genetix & EZ-Rays

Genetix Micro Spotting Pins

Genetix Microarray Spotting Solution

Various Packs of Glass Beads

2 x Plastibrand Tip-Racks

Various other spare bits/parts

16 x New & Sealed Boxes of VWR Micro Centrifuge Tubes (2ml) 500/pack (10 Packs in box)

8 x Boxes of ISS 2ml Microtubes with Separate White Caps Gamma Iradiated (4 x Ref MT0075IR)

1 x Box of ISS 10ml Specimen Collection Tubes (QTY 500)


Image of item

£ 760.00 (ex. VAT) 1 in stock

Genetix QArray Microarray Printer with Jun-Air 400 Compressor OF302-10S Lab

ITEM-27506

This Genetix QArray Microarray Printer was removed from a university lab where it was surplus to requirements.


The lab said it was working prior to removal.


Included in the system are;


1 x Genetix QArray

Inside dims - D67 W100 H35cm

The unit powers on but we were unable to test it further at our facility.


Inside side panel of bottom unit -


1 x Jun-Air Model 400 Oil-Less Compressor

It powers on, works, and comes with a manual.


1 x Separate Jun-Air Unit:-

Model - OF302-10S

It powers on


Computer parts include:-

PC, Monitor, Keyboard, Mouse & Metrologic Scanner

The PC has QSoft IO Manager, QSoft XP ReStackers & QSoft Microarraying programs/software.


The item is in a reasonable, used cosmetic condition.


Manuals:-

Genetix Microarray User Training Guide

MicroArraying Application Guide

QArray User Guide

Array-Pro Analyzer Users Guide


Boxed Accessories/Consumables include:

18 x Mostly New & Sealed Boxes of VWR Micro Centrifuge Tubes (2ml) 500/pack (10 Packs in box)

8 x Boxes of ISS 2ml Microtubes with Separate White Caps Gamma Iradiated (4 x Ref MT0075IR)

Stand Apron, Mask Stand and Mount for Metrologic Scanner

Computer Cable

Image of item

£ POA 1 in stock

INTEGRA Viaflo Assist, Charging Carousel, P94,P95,P96,P98 Electronic Pipettes

ITEM-36142

This item is new in stock. Please enquire for further details.

Items 1 to 8 of 8

Filters

Price (£)

to

Condition

Brand