Glove Boxes
Items 1 to 12 of 12
£ 18,000.00 (ex. VAT) 1 in stock
Baker Ruskinn Invivo2 500 Hypoxia Glovebox Workstation on Trolley Lab
ITEM-37959
Baker Ruskinn Invivo2 500 Hypoxia Glovebox Workstation on Trolley
This system was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). Both the CO2 & O2 sensors are functional.
It is in good cosmetic condition internally and externally.
The internal light would not work.
Support trolley with castors 141 x 71 x 83cm (l x w x h)
£ 9,000.00 (ex. VAT) 1 in stock
Ruskinn Invivo2 400 Hypoxia Workstation With Ruskinn Gas Mixer Q Lab
ITEM-44517
3M Invivo2 400 Hypoxia Workstation With Ruskinn Gas Mixer Q Lab
These items were removed from a university where they were surplus to requirement.
Both units power up and are in good working order (socket tester not included).
It is in good cosmetic condition.
Includes the following:
- 3M Invivo2 400 Hypoxia Workstation
- Ruskinn Gas Mixer Q
£ 8,000.00 (ex. VAT) 1 in stock
Ruskinn Invivo2 400 Hypoxia Workstation Lab
ITEM-44520
3M Invivo2 400 Hypoxia Workstation Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order (thermometer not included).
It is in good cosmetic condition.
£ 3,000.00 (ex. VAT) 1 in stock
Ruskinn Concept Plus Anaerobic Workstation Lab
ITEM-30435
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. The inner door hasn't been tested as it requires compressed air but we see no reason why it would not work with the correct air setup.
There are no gloves included.
It is in good cosmetic condition with minor marks.
Internal dimensions- D57.5 W105 H47cm
Shelf - 104 x 25cm
Right chamber - D29 W33 H30cm
£ 2,915.00 (ex. VAT) 1 in stock
Don Whitley Scientific miniMACS DG250 Anaerobic Workstation Glovebox
ITEM-35399
Don Whitley Scientific miniMACS DG250 Anaerobic Workstation Glovebox
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order but has not been tested under a vacuum.
It is in good cosmetic condition with minor marks from use.
It is supplied with;
miniMACS Vacuum pump. Serial No. 2633819.
miniMACS Footswitch assembly. Part No. A03107.
Whitley DG250 Anaerobic Workstation User Manual.
don whitley scientific 500/1000 Catalyst Sachet. Part No. A02130.
don whitley scientific 500/1000 Anotox Sachet. Part No. A02129.
don whitley scientific Natural Superflex Tubing. Part No. A00454.
£ 2,195.00 (ex. VAT) 1 in stock
Don Whitley Scientific miniMACS Anaerobic Workstation Glovebox Safety Cabinet
ITEM-30207
This Don Whitley Scientific miniMACS Anaerobic Workstation was removed from a university lab where it was surplus to requirements.
The unit has been looked at by a qualified service engineer.
The pump works from the main socket but not from the instrument socket. They cleaned the filter which was previously making the pump run loudly. They repaired the fans which were previously broken.
They have tested the cabinet with a vacuum pump and it seems it is holding the vacuum. Although one piece of plexiglass holding the right door lock is broken. The system holds a vacuum despite this.
The temperature was tested up to 37˚c, it took about an hour to reach this.
It is in reasonably good cosmetic condition but has some minor marks from use and the aforementioned crack.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 2,000.00 (ex. VAT) 1 in stock
Baker Ruskinn Invivo2 400 Incubated Glovebox and Iconic Gas Control Lab Faulty
ITEM-37958
Baker Ruskinn Invivo2 400 Incubated Workstation Glovebox and Iconic Gas Control
This system was removed from a university lab where it was surplus to requirements.
The unit powers up and has been temperature tested (thermometer not included).
It is in good cosmetic condition internally/externally, with the display screen and internal light/socket in working order.
The previous client has stated that it has a faulty O2 sensor, this was confirmed on-site during testing.
Therefore, it is listed as Spares/Repair.
Also includes;
2 x Power leads
3 x Gas feed hoses
1 x Data cable
£ 2,000.00 (ex. VAT) 1 in stock
DW Scientific MACS VA500 Microaerophilic Workstation Lab
ITEM-36542
DW Scientific MACS VA500 Microaerophilic Workstation Lab
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It was tested with a digital thermometer (not included).
It is in reasonable cosmetic condition, with marks from use.
£ 1,400.00 (ex. VAT) 1 in stock
Don Whitley VA500 Hypoxia Workstation Glove Box + VA Airlock Unit Lav
ITEM-29949
This Don Whitley VA500 Hypoxia Workstation Glove Box was removed from a university lab where it was surplus to requirements.
The lab were unable to confirm the working status as it has not been used in some time, but did confirm that it requires a software upgrade.
The unit powers up and the incubator is in working order. It has not been tested under vacuum. The lights are functional on both units. Glove door locks both working. The left glove insert is damaged. Rubber has separated from the ring.
Both units are in good cosmetic condition. The back of Airlock does have some cracking on the external casing due to UV exposure. The unit was situated by a window at the university which caused this.
Included with the system are;
1 x User manual folder for both units.
1 x "MACS Footswitch". it is in good cosmetic condition but we were unable to test it. It is wireless.
2x Gas regulators. Good condition, not tested.
P/N - 4127822-01-B03
S/N - 1350P4HR
S/N - 1370Q7TV
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 700.00 (ex. VAT) 1 in stock
Don Whitley Scientific DG250 miniMACS Anaerobic Workstation Lab Spares/Repairs
ITEM-35398
Don Whitley Scientific DG250 miniMACS Anaerobic Workstation
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, however, it does not run higher than 37˚C without shutting down and has a non-functional foot pedal. it is listed as Spares/Repair.
The internal light and socket are in working order (Socket tester not included)
This item is supplied with the following:
- miniMACS Vacuum pump. Serial No. 2363810.
- miniMACS Footswitch assembly. Part No. A03107.
- don whitley scientific 500/1000 Catalyst Sachet. Part No. A02130.
- don whitley scientific Anotox Sachet. Part No. A02129.
- don whitley scientific MG500/1000 Evaporator. Part No. A02128.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 500.00 (ex. VAT) 1 in stock
VAC HE-63-P PEDATROL GloveBox Lab Spares/Repairs
ITEM-41335
VAC HE-63-P PEDATROL GloveBox Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition.
The item is missing its back panel, which prevents us from conducting tests due to exposed wires, therefore, it is sold as Spares/Repairs.
Also includes the following:
- Components for the machine
- Tubing
- Pipes
- Automatic Dewpoint Meter
£ 250.00 (ex. VAT) 1 in stock
DW Scientific MACS-MG-1000 Anaerobic Workstation Laboratory Incubated Glovebox
ITEM-24289
This DW Scientific MACS-MG-1000 Anaerobic Workstation Laboratory Incubated Glovebox was removed from a university lab where it was surplus to requirements.
The unit has not been used in some years and will need a full service before it is used again. The gloves will also all need replacing.
All the parts of the unit are in very good condition. and they all powered on with no issues. It's in good working order. The door lock system on the glove ports all works correctly.
The heating function works and was tested with a digital thermometer
It was set to 37˚C, our thermometer measured 36.7˚C ad the display was showing 36.9˚C. The temperature did fluctuate slightly but was never above the set value.
The gas system was not tested.
The glove box's internal dimensions are 185cm(L) x 69cm (W) x 79cm (H).
The airlock unit's internal dimensions are 30cm (L) x 35cm (W) x 30cm (H).
The system is mounted on a substantial metal frame with wheels that stands at 94cm to platform height.
Items 1 to 12 of 12