2 x Enraf Nonius FR 590 X-Ray System Lab

These items were removed from a university where they were surplus to requirement.

Both systems are in good cosmetic condition, due to the nature of the item we are unable to power on or test further at our facility.

There are no known faults with the system, but we assume that it will require some degree of recommissioning before it can be used again. For this reason it is sold for spares/repairs.

Includes:

-2x Tran-017 Micro T,65W,CNT,RS,Euro

   S/N-SB966555

   S/N-9619060416

-2x Nonius Mach 3

 Type-540.309

 S/N-20-05

-CEM-09A-ii CRT Video Monitor

Model-MM-9A

S/N-CG803151R

MFG Year- August 2006

-CD-RW Drive

Model- SOHR-5238S

S/N-408438003675

-Oxford Diffraction Control Computer

Model- ACP-2000

S/N-KMA0242954

-ACI Computers Tower

Model-Creative

S/N-N/A

-ASTEC MVP Series Power Supply

Model-MP6-2U-1Q-1Q-1R-03

S/N-0616E271

Max Output Power- 600/800 WATTS

-Dell Monitor

Model-P190St

S/N-CN-0CHRYK-74445-086-C30S

-HP Proliant DL140

S/N-GB8815J034

Model-0 CT Chassis DL140G3

-Nonius KappaCCD

Model-ST-138S D12992033

S/N-7152.P1-7055-38.57831

-ENRAF NONIUS

Type-1590-830

S/N-05-18

-2x Julabo FL601 Chiller (Powered on message comes up E01)

 Model-FL601

 S/N-00274753

 S/N-00250168

-Apogee 5500 Series Radiation Shielded X-Ray Tube

Target Material-Cu

S/N-93510

-Empyrean tube PANalytical

NC9430 033 73105

No. DK 429266. W1800

-Micro x-ray inc

 X-ray tube

P/N-18068

S/N03496

Target Material-Cu

Manufacture Year- 5/8/19

Software:

-Mercury 3.10.3

Oxford Diffraction Xcalibur PX Ultra Crystal Diffraction X-ray Generator System

This system was removed from a university lab where it was surplus to requirements.

The system is in very good cosmetic condition, but several units encountered issues during testing, and no PC or control software is included. As such, the system is listed for spares/repair. - Further information regarding issues faced are stated below.

The lab stated it had been not used for some time but had some issues.

The system units include:

1. Oxford Diffraction Xcalibur PX Ultra
2. Serial No.: XXH-127/05
3. Year: 2005
4. Powered on with mains light, Shutter Closed status light, inner display screen, and hand-held remote keypad all functioning

1. Oxford Diffraction X-ray Protection Cabinet
2. Serial No.: XPD-127/05
3. Year: 2005

1. Thermo Scientific Neslab ThermoFlex 10,000 Recirculating Chiller
2. Serial No.: 1111473501170217
3. Powered on but shut off after 1 second with error code "PHEr" (limit fault)

1. Oxford Diffraction KMW200CCD CCD Detector Chiller Unit
2. Serial No.: CCA 73/06
3. Year: 2006
4. Powered on, but no further testing possible

1. Oxford Diffraction KMC3000C X-ray Tube Chiller
2. Serial No.: CAC-142/05
3. Year: 2005
4. Powered on, pump ran, thermostat seemed functional, but not fully tested

1. Oxford Diffraction Cryodrive 2.0
2. Serial No.: R72-0558
3. 6944 running hours
4. Powered on, but no further testing without gas supply

1. Oxford Cryosystems Cobra Controller 700 Series Cold Head Controller
2. Serial No.: 741174
3. Powered on, displayed ambient temperature, status lights, and responsive buttons

1. Parker NitroFlowLab Nitrogen Generator
2. Model No.: 4278
3. Serial No.: 4278-13NFLC0008
4. Powered on, displayed a message "writing information to an SD card," and did not allow further actions

1. Oxford Cryosystems Standard Cobra Nitrogen Control Pump
2. Serial No.: CB171

1. Agilent HS 602 Vacuum Pump with NW25 Oil Exhaust Filter
2. Model: 849-9365R001
3. Serial No.: 232830
4. Year: 2006
5. Produced a vacuum but failed a PAT test on insulation

Additional notes:

1. All units passed a PAT test except for the Agilent vacuum pump, which failed due to insulation issues.
2. The Xcalibur unit and Neslab chiller were only visually tested due to larger power plugs.

Manuals included:

1. Oxford Instruments Object Bench Software handbook
2. Xcalibur Series user manual
3. Thermo Scientific Recirculating Chiller Operation, Installation, and Maintenance manual
4. Oxford Diffraction KMC3000C user manual
5. Oxford Cryosystems Cobra operation guide
6. Safety Matters cryogenic safety manual
7. 2 x CrysAlis Pro user manuals
8. Oxford Instruments Cryojet Controller UMC002 manual
9. Workstation 4 VMware v4.52 Virtual Machine Software and manual

Accessories included:

1. 1 x set of keys for safety cabinet
2. 1 x Long Fine Focus unit (Type OD2773/00, No. 163054)
3. 3 x glass vacuum traps (2 litres approx.)
4. 2 x vacuum pump platforms
5. 2 x Parker wound filter cartridges (Part No.: M11R10A)
6. 2 x Agilent KMW3000 filter cartridges (Part No.: IJ-00-01-002)
7. 1 x carbon filter nitroflow mobile
8. 6 x data cables
9. 4 x Cobra stainless steel line drier units
10. 1 x 4-way valve purge block
11. 1 x box of stainless armoured hose pipe and 1/4" plastic tubing

The unit was removed from a university lab. It has not been tested at our facility.

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

Included are;

Enraf Nonius Goniometer Control Unit

Type 0590.821

Serial No. 042

Enraf Nonius main processing unit

Type 1546.801

Serial No. 19-19

Jobin Yvon Horiba PC without HDD

Bruker Nonius X-Ray Control

Type 1590.830

Serial 24-04

Enraf Nonius Delft x-ray station with Thomson Tubes X-Ray Head

Enraf Nonius Pocket Terminal

Serial No. 69786R

2 x Huber mechanical adjusting blocks

Part Nos. D83253 D8219

4 x Software disks Cad4- PC Software V1.5c 3.5

Connecting cables and data leads

Rigaku MicroMax-007HF Rotating Anode X-Ray Generator, AFC-11R System Lab

This system was removed from a university where it was surplus to requirement.

All units are in excellent cosmetic condition.

This Rigaku X-ray generator is reportedly in working condition according to the previous owner. However, some parts, such as the detector, were removed for spares to keep another system running.

No testing was conducted, as the main unit requires a transformed three-phase 400-volt to a 200-volt three-phase supply. Therefore, we cannot confirm its working condition and therefore it is listed as Spares/Repair.

This system comprises the following:

Rigaku MicroMax-007HF

Model RA-MICRO7HFM_RAC

Serial No. ID211302

The main control system is mounted on a cabinet 100 cm x 60 cm x 90 cm high with a metric 2.5 cm hole spacing isolation tabletop.

The operating unit mounted on the table is 40 cm x 30 cm x 55 cm high

Rigaku Model AFC-11R detector base and positioning unit

Serial No. ID02493

Technifab Products cryogenic sample preparation unit

52 cm platform with 9 cm central hole with insulated bung

26 cm diameter x 22 cm deep stainless vessel

Accessories:

1 x Rigaku Osmic Varimax Optical Fixture Serial No. 2500

1 x Rigaku Crystallography X-ray XRF Model CU 4364F501

2 x Rigaku X-Ray Diffractometer Instruction Manuals

Several lengths of colour coded 5mm tubing

1 x Hampton Research HR4-767 XYZ heated goniometer head

1 x Hampton Research HR4-643 XYZ short standard goniometer head

1 x PEX4S553B PCB/card to interface with 4 coms sockets

Job Lot of STOE XRD Crystallography Parts Lab

These items were removed from a university where they were surplus to requirement.

All XRD items are in reasonably good cosmetic condition, none of them have been powered or tested.

The PC has been powered on and has the following software installed:

1. Winxpow Software

No password is required (press 'Cancel' when the computer asks for a password).

This PC runs on Microsoft Windows 95.

This item is also supplied with various keys and power cables.