IT & AV
Items 1 to 20 of 77
£ 5,000.00 (ex. VAT) 1 in stock
Stratasys Objet30 V2 Pro Desktop 3D Printer With Software 2013 Lab
ITEM-41975
Stratasys Objet30 V2 Pro Desktop 3D Printer With Software Lab
This item was removed from a university where it was surplus to requirement.
It is in excellent cosmetic condition and powers on, the previous client reported it was fully functional when last used and was flushed of its resin.
Also included are the following:
- 1 x Objet30 Software and Drivers SET-2400:
- 1 x Objet30 Printer Ver. 30.2.1.5896
- 1 x Objet24/30 Studio Ver. 8.5.9.3
- 1 x Machine Parameters SWR-500
- 1 x Objet24/30 Image Disk Ver. 2.0
- 1 x full user manual
- 1 x Aten Masterview KVMP Switch Model CS-1732A Serial No. Z3D2P108BF0222
- 1 x Adaptor VGa to DVI Part No. 10032003
- 5 x Data leads
- 2 x Wiper blades Part No. 04280
- 1 x Loupe Magnification x10 Part MSC-00086
- 1 x Waste cape Part MSC-00063
- 2 x Scrapers
£ 5,000.00 (ex. VAT) 1 in stock
Flir Systems ThermaCam SC500 194 780 Thermal Imaging Camera Lab
ITEM-40945
This Flir Systems ThermaCam SC500 194 780 was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good cosmetic condition minor with marks from use, we are unable to test it further at our facility.
Included are the following:
Flir Systems PC Card Interface
P/N: 194 240
S/N: 2030068
HiTRON 13.5 volt Power Supply
M/N: HES61-11B
S/N: 0165
Flir Systems Break Out Box
P/N: 194 257
S/N: 3300066
£ 3,000.00 (ex. VAT) 1 in stock
Christie Mirage S+4K Commercial Projector
ITEM-36558
Christie Mirage S+4K Commercial Projector
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good cosmetic condition with minor marks.
The control buttons and remote control are fully functional and performing as intended.
£ 3,000.00 (ex. VAT) 1 in stock
Voltaire ISR-9288 Grid Director
ITEM-39219
Voltaire ISR-9288 Grid Director
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 2,000.00 (ex. VAT) 1 in stock
Sachtler Video 15SB Camera Camcorder Carbon Fibre Tripod And Fluid Head
ITEM-41740
Sachtler Video 15SB Camera Camcorder Carbon Fibre Tripod And Fluid Head
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition with no damage preventing its functionality.
Tripod Height Range: 82 - 170cm
This item includes the carry case shown in slideshow.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,980.00 (ex. VAT) 1 in stock
44 x Sony XCD-X710CR Industrial Firewire Cameras and Firewire Cables
ITEM-36556
44x Sony XCD-X710CR Industrial Firewire Cameras
43x HR F1.4/8 mm Lenses
1x 2/3" F1.4 f=6mm lens
100x 10 meter Firewire cables
S/N: UNIB CAB6T6-100
This job lot of items comes from a university lab, The items were no longer required.
None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.
The units have not been tested at all.
NEW ITEM
NEW ITEM
£ 1,500.00 (ex. VAT) 1 in stock
Christie Digital Type 1.9-3.8:1 Zoom Long Lens
ITEM-39902
Christie Digital 1.9-3.8:1 Zoom Long Lens
This was removed from a university lab where it was surplus to requirements.
The item is brand new and unused.
£ 1,500.00 (ex. VAT) 1 in stock
Newtek Tricaster TCXD455 Cs Multistandard Switcher And Control Surface
ITEM-37730
Newtek Tricaster TCXD455 Cs Multistandard Switcher And Control Surface
This system was removed from a university lab where it was surplus to requirements.
All units are in good cosmetic condition.
The Newtek Tricaster TCXD455 Cs Multistandard Switcher and Keyboard power on and communicate successfully, there is no operating system installed as there is no HDD. For this reason, the control surface could not be tested.
£ 1,350.00 (ex. VAT) 1 in stock
Canon Auto Refractor R-50 Retinal Camera
ITEM-39886
Canon Auto Refractor R-50 Retinal Camera
This was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition with discolouration from age.
It powers on with all functions in working order.
The item sits on:
Topcon Electric Adjustable Height Medical Table, AIT-15
Adjustable height from 66cm to 88cm
£ 1,135.00 (ex. VAT) 1 in stock
DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector
ITEM-25509
This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.
The unit powers up and the lamp is working but we were unable to test it with any of our equipment due to the connectors not matching.
There are a number of cables fitted to an Inline 3252HR RGBHV Distribution Amplifier/Line Driver.
Lens - Christie Digital Systems Fixed XGA/SXGA 1.2:1 Minolta
The remote control was tested and is in working order.
£ 1,000.00 (ex. VAT) 1 in stock
Christie Digital 1.9-3.8:1 Zoom Long Lens
ITEM-39901
Christie Digital 1.9-3.8:1 Zoom Long Lens
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested.
£ 1,000.00 (ex. VAT) 1 in stock
Zcorporation Spectrum Z510 3D Printer
ITEM-39176
Zcorporation Spectrum Z510 3D Printer
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further.
Includes:
-8 x Elga Veolia LC117 Purification Packs (expired 2019)
-12 x Elga Veolia LC101 Pretreatment Packs (expired 2019)
-2 x Elga Veolia LC117 Cartridge Packs (expired 2016 + 2010)
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Christie Mirage Model S+4K Commercial Projector Spares/Repairs
ITEM-36557
Christie Mirage Model S+4K Commercial Projector
This was removed from a university lab where it was surplus to requirements.
The unit powers up but is displaying with a green tinge. We were unable to get this to change.
The lamp has run for 780 hours.
It is sold for spares/repairs.
£ 790.00 (ex. VAT) 1 in stock
DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector
ITEM-25512
This DLP Christie Mirage 2000 Model no. 38-DMD023-12 Projector was removed from a university lab where it was surplus to requirements.
The unit powers up and the lamp is working but we were unable to connect it to any of our equipment to test it further. It comes with cables and a remote control which is fully working.
Lens - Christie Digital Systems zoom XGA/SXGA 2.2-4.0:1 Minolta
£ 750.00 (ex. VAT) 1 in stock
DJI Ronin R-16 Camera Stabilisation Gimbal System Kit
ITEM-38018
DJI Ronin R-16 Camera Stabilisation Gimbal System Kit
This system was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and working order, we are unable to test it fully at our facility.
This kit includes the following:
1 x main remote controller Model NDJ6 Serial No. MP1410CK003211
1 x thumb controller and guide booklet
1 x iPad mini 2 16GB model A1489 serial No. F9FQ4T3AFCM8 with charger and USB cable
1 x battery charger Model MDA10116803000
1 x camera base plate DJI R-001 for RED/ Canon/ Blackmagic/ Nikon
2 x batteries model No. 824380-3400mAh-14.8v
1 x USB cable
1 x power leads
1 x 3-axis small rig connector
2 x type A quick release mounts
1 x accessory kit - 3 x allen keys, 4 x screws, 1 x locking tool
1 x Ronin-M hard carry case
1 x user manual
1 x stand
£ 710.00 (ex. VAT) 1 in stock
Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 520 MVB Tripod
ITEM-41742
Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 520 MVB Tripod
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The unit has been etched with the previous owner's identity. This has been hidden from the photos to protect the client.
Also included are the following:
1 x Charger Power Adapter CA-930 No. CAG
1 x Manfrotto 520MVB tripod and head No. 520MVB/KJ05
1 x Shoulder soft carry bag for the camera
1 x Shoulder soft carry bag for tripod
1 x Power lead
1 x Data transfer cable
1 x Lens cap
£ 710.00 (ex. VAT) 1 in stock
Canon XF305 HD PAL Video Camera Camcorder Kit With Shoulder Rig
ITEM-41744
Canon XF305 HD PAL Video Camera Camcorder Kit With Shoulder Rig
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in full working order.
Also included are the following:
1 x Charger Power Adapter
No. BAC
1 x Battery Pack BP-975 Serial No. 201106 C
1 x shoulder rig, fully adjustable, unknown manufacturer
1 x Shoulder soft carry bag
1 x Power lead
1 x Data transfer cable
1 x Lens cap
£ 700.00 (ex. VAT) 1 in stock
Canon Microprinter 90 Microfiche Microfilm Reader and Printer Lab
ITEM-37719
This Canon Microprinter 90 Microfiche Microfilm Reader and Printer was removed from a university lab where it was surplus to requirements.
This item is in good cosmetic condition and powers up, but we are unable to test it further at our facility.
£ 700.00 (ex. VAT) 1 in stock
Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 755XB Tripod
ITEM-41741
Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 755XB Tripod
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in full working order.
All items included are as follows:
- 1 x battery BP-970G Serial No. 201311
- Charger Power Adapter CA-930 No. BCC
- Manfrotto 755XB tripod and head No. A3289340 (Height from 70cm to 149cm)
- Shoulder soft carry bag for camera
- Shoulder soft carry bag for tripod
- Power lead
- Data transfer cable
- Lens cap
£ 700.00 (ex. VAT) 1 in stock
Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt Box
ITEM-38019
Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt Box
Shoulder Plate Kit
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition, we are unable to test it further at our facility.
The kit includes the following:
1 x monitor arm
1 x tripod mount
1 x 80mm lens adaptor
1 x 95mm lens adaptor
1 x follow focus handle
1 x hard carry case
1 x 40cm steer whip
1 x 50cm steer whip
1 x top hand grip
1 x 0.5M pitch gear
1 x 0.6M pitch gear
1 x lens supporter
2 x allen keys
2 x 10cm rods
1 x nun's knickers
Items 1 to 20 of 77