Electronics & Electrical Engineering

£ 9,000.00 (ex. VAT) 1 in stock

Chroma 8 Channel Battery Cell Programmable Charge / Discharge Tester 17208M Lab

ITEM-18222

This Chroma 8 Channel Battery Cell Programmable Charge/Discharge Tester Model 17208M is being sold on behalf of a client. It is surplus to requirements. It is not currently at our site, but viewings can be arranged.

The unit is in good cosmetic condition and has been stored in the original box for the last year. It was working before it was put into storage.

Some info on the unit;

Chroma’s 17208M is a standalone 8 channel version of their 17011 series high precision charge/discharge tester specifically designed for Lithium-ion batteries, electrical double layer capacitors (EDLC), and lithium-ion capacitors (LIC).

The 17208M comes as a fully integrated system which includes allowing full configuration with reporting and statistics capability.

The new Chroma 17208M-6-30 is a high accuracy (±0.02% of F.S.) programmable charge and discharge tester (6V/30A 8 channels) built with 4 current ranges. It is the best test solution for energy storage products such as battery cells, super capacitors, and lithium ion capacitors.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 6,310.00 (ex. VAT) 1 in stock

Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A Lab

ITEM-25567

Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A

These units were removed from a university lab where they were surplus to requirements.

Both units power up but the Pattern generator is showing "INTERNAL CLOCK (OPTION.01)". We are told this is just because they are not linked up. We unfortunately do not have the connecting leads.

They are in good cosmetic condition with minor marks from use.

1x Anritsu Error Detector MP1764A

Model. M06340

1x Anritsu Pulse Pattern Generator MP1763B

Model. M06940

£ 4,375.00 (ex. VAT) 1 in stock

Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller Lab

ITEM-35544

Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller

This was removed from a university lab where it was surplus to requirements.

Everything powers up but has not been tested further.

The PC contains quite a lot of software.

The programs that are relevant to the system are:

MicroWriter ML Version 2.11.11.0.

Thorlabs apt configuration utility v2.2.5389 14611.

MicroWriter ML will not start up properly as the hardware is not connected. This is not a fault, we just don't have the rest of the system

The Newport Motion Controller/Driver Model XPS control unit is for a table that the microwriter would sit on.

SPARES/REPAIR ITEM

£ 4,000.00 (ex. VAT) 1 in stock

Taylor Hobson Form Talysurf -120L Surface Measuring Machine Lab Spares/Repairs

ITEM-40012

Taylor Hobson Form Talysurf -120L Surface Measuring Machine

This system was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

This item has not been powered on or tested further, therefore it is listed as Spares/Repairs.

The lab informed us that it was faulty prior to removal.

Includes the following:

1x Taylor Hobson CRT Monitor

1x Taylor Hobson HP Desktop PC (Hardive removed)

1x Taylor Hobson Motor Controller Driver

1x Form Talysurf Series Power Supply

1x Form Talysurf Series Printout unit

1x Taylor Hobson Pneumo Multitasking Motor Controller.

4x Booklets/User Guides

1x Dallas Semiconductor Dongle Key

£ 3,925.00 (ex. VAT) 1 in stock

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

ITEM-36247

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

This was removed from a university lab where it was surplus to requirements.

The cabinet contains the following items.

Aerotech A3200 Ndrive CP x 5

Serial#1:577057/7

Serial#2:577057/6

Serial#3:681834/7

Serial#4:681834/8

Serial#5:681834/2

All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet.

National Instruments Signal Conditioning Connector Block x 2

Model: SC-2345

Both have stickers on the front of the items

Sicker on item 1: pH Sensor

Sticker on item 2: Thermocouples Inlet/Outlet Drive Relays

There are other small electrical switches and controllers inside.

£ 2,420.00 (ex. VAT) 1 in stock

Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules Lab

ITEM-28395

This Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition. It is missing one of its feet.

£ 2,020.00 (ex. VAT) 1 in stock

Solartron SI 1280 Electrochemical Measurement Unit Model - 1280A Lab

ITEM-19267

This Solartron SI 1280 Electrochemical Measurement Unit Model - 1280A was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in reasonably good cosmetic condition but has some marks from use.

£ 2,000.00 (ex. VAT) 1 in stock

Spinnaker 1161 Laser with Water Cooling System

ITEM-41129

Spectra-physics cooling pump

Model: 1461-2

S/N: 042

Powers on, unable to test further.

Spectra Physics Spinnaker 1261:

Model:1261

S/N: 0019

The necessary cable is missing, so it couldn't be turned on.

Spectra Physics Spinnaker 1161 Laser:

Model: 1161-01

S/N: 1020

Manufactured:1992

The necessary cable is missing, so it couldn't be turned on.

£ 1,500.00 (ex. VAT) 1 in stock

29x ADInstruments PowerLab/200 with Software Lab

ITEM-41557

29x ADInstruments PowerLab/200 with Software Lab

All items have been removed from a university where it was surplus to requirement.

They are all in good cosmetic condition and power on, we are unable to test them further at our facility.

£ 1,350.00 (ex. VAT) 1 in stock

GeoTech G100 Co2 Analyser with Hygroclip 2 Advanced Humidity Sensor Lab

ITEM-41859

GeoTech G100 Co2 Analyser with Hygroclip 2 Advanced Humidity Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Included are the following:

1 x GeoTech G100 Co2 Analyser

S/N - IN17195

1 x HygroClip 2 Advanced series

S/N - 20684187

1 x GeoTech Cary Case

1 x Sample Tube Kit

SPARES/REPAIR ITEM

£ 1,350.00 (ex. VAT) 1 in stock

WEG CFW -11 Venture Inverter Control Box Lab Spares/Repairs

ITEM-41470

WEG CFW -11 Venture Inverter Control Box Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility.

The key is not included but can be opened with a standard control cabinet key.

Includes manual.

The unit has no cable so is sold for spares/repairs

£ 1,080.00 (ex. VAT) 1 in stock

AT Delta-T Logger System with Software & Accessories Lab

ITEM-25021

This was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented.

The item is untested as it wasn't supplied with a PSU.

Also included are the following:

1x Delta-T Devices atmospheric temperature & humidity probe

S/N: RHAI-077

1x Delta-T PC software type LS2

Version 1.04

1x Desiccant Pack

1x DE-9 cable

1x Tutorial Kit

1x Spares & Accessory Pack

3x Component part (EMC directive) 5m

5x Temperature Probes User Manual

1x Quantum Sensor User Manual

1x Delta-T Devices Data Loggers, Sensors & Systems

1x Delta-T Devices Plant Science & Solar Radiation Studies

1x Delta-T Devices Image Analysis Systems

1x Delta-T Logger User Manual Version 2.01

£ 1,080.00 (ex. VAT) 1 in stock

Mettler Toledo DA-100M Density Meter Lab

ITEM-35284

This Mettler Toledo DA-100M Density Meter was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in reasonable cosmetic condition but has marks and rusting from use.

£ 1,000.00 (ex. VAT) 1 in stock

Integrated Measurement Systems IMS MSTS FT Test Station MSTS1 Lab

ITEM-17219

This unit came out of an engineering university. This unit had been in storage for a while but we were informed that it did operate correctly the last time it was used.

Item is in a good used condition with only minor marks.

It is supplied with four additional circuit boards.

Details:

IMS open/custom interface board, 110-0337-003 REV A.

IMS LBV DIB board, 120-0577-000 REV A.

Force Autocal, US2/97 03080, MSTS1 FT.

Charles Water CP304 zip-stat, A11117DD.

The PSU unit has a castor missing.

Item has not been powered on or tested in any way.

Integrated Measurement Systems Test Station.

Model: MSTS1 Blazer.

Serial No: 001036.

Circuit board fitted: IMS mixed signal quad demo board, 100-0478-000.

Supplied with:

ONEAC Power supply.

Model: CSD31150SPL.

Serial No: 9723-3726.

£ 1,000.00 (ex. VAT) 1 in stock

Powertecnique Uninterruptable Three-Phase Power Supply & Battery Box Lab

ITEM-20369

This Powertecnique Uninterruptable Three-Phase Power Supply & Battery Box was removed from a university lab where it was surplus to requirements.

This was last serviced december 2019. We understand they were in use until at least 2021, but may have been offline for some time so it is possible the batteries perform poorly.

The UPS powers up but has not been tested further. We were unable to test the battery box.

They are in reasonably good cosmetic condition but have some marks from use.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Integrated BMS Jet Nozzle Test Facility -CP3 Lab Spares/Repairs

ITEM-41471

Integrated BMS Jet Nozzle Test Facility -CP3 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable.

Therefore, it is listed as Spares/Repair.

Includes operation keys.

Door key not included but can be opened with a standard control cabinet key.

£ 910.00 (ex. VAT) 1 in stock

ATI Portasens lll Gas Leak Detector Kit Model D16 w/ H2O2 Sensor Lab

ITEM-38095

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The gas leak detection kit contains the following items:

1 x main D16 detection unit

1 x ATI H2O2 sensor

1 x H10 Sensor Keeper 00-0981

1 x Sampling Wand for localised detection

2 x Tenenergy 10,000 mAh NiMH rechargeable batteries

1 x Intellicharger Newi2 charger with power cable

1 x Dwyger Instuments Minimaster flow meter

1 x calibration t-fitting

1 x filters

1 x 1/4" straight connector

1 x USB cable

1 x hard carry case

£ 905.00 (ex. VAT) 1 in stock

ATI Portasens lll Gas Leak Detector Kit Model - D16 w/ H2O2 Sensor Lab

ITEM-38094

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The gas leak detection kit contains the following items:

1 x main D16 detection unit

1 x ATI H2O2 sensor

1 x H10 Sensor Keeper 00-0981

1 x Sampling Wand for localised detection

2 x Tenenergy 10,000 mAh NiMH rechargeable batteries

1 x Intellicharger Newi2 charger with power cable

1 x Dwyger Instuments Minimaster flow meter

1 x calibration t-fitting

3 x filters

1 x 1/4" straight connector

1 x USB cable

1 x hard carry case

SPARES/REPAIR ITEM

£ 900.00 (ex. VAT) 1 in stock

Job Lot of Spellman High Voltage Power Supplies Lab

ITEM-38560

Job Lot of Spellman High Voltage Power Supplies.

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

7 x Model: X3000.

Serial No: 0732M-1-5252, 0732M-1-5275, 0728M-1-5218, 0728M-1-5212, 0728M-1-5193, 0728M-1-5205, 0726M-1-5181.

1 x Model: X3362.

Serial No: 51645-1-A00141.

1 x Model: X3363.

Serial No: 51797-1-A00495.

1 x Unknown unit (Information plate damaged).

Serial No. 37822-4-A00011.

£ 890.00 (ex. VAT) 1 in stock

Profile Pro 8000 Module Chassis with 8x WDM sources & Key Lab

ITEM-28391

This Profile Pro 8000 Module Chassis was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition.

Revision. 4.44

Interface: 1.22

8x WDM sources

It comes with;

1 x Kaba Micro- E Key Model No. ED9001

£ 890.00 (ex. VAT) 1 in stock

ATI Portasens lll Gas Leak Detector Model No. D16 with H2O2 Sensor Lab

ITEM-38096

ATI Portasens lll Gas Leak Detector Model No. D16 with H2O2 Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up, we are unable to test it further at our facility.

Please note that this kit does not contain the battery charger, charger cable, sampling wand, or flow meter.

The gas leak detection kit contains the following items:

1 x main D16 detection unit

1 x ATI H2O2 sensor

1 x H10 Sensor Keeper 00-0981

1 x Tenenergy 10,000 mAh NiMH rechargeable battery

1 x calibration t-fitting

3 x filters

1 x 1/4" straight connector

1 x USB cable

1 x hard carry case

£ 885.00 (ex. VAT) 1 in stock

Thorlabs Profile Pro 8000 Module Chassis with 6x WDM sources and Key Lab

ITEM-28392

This Profile Pro 8000 Module Chassis was removed from a university lab where it was surplus to requirements.

The unit powers up and one of the 6 WDM sources is showing an error light. The rest seem to be functioning.

It is in good cosmetic condition with marks from use.

Rev: 4.44

Kaba Micro- E Key

Model No. ED9001

£ 855.00 (ex. VAT) 1 in stock

APC UPS Uninterruptible Power Supply Model SRT6KXLI

ITEM-37002

APC UPS Uninterruptible Power Supply Model SRT6KXLI

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in good cosmetic condition with minor marks.

£ 800.00 (ex. VAT) 1 in stock

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab

ITEM-38093

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The gas leak detection kit contains the following items:

1 x main D16 detection unit

1 x ATI H2O2 sensor

1 x H10 Sensor Keeper 00-0981

1 x Sampling Wand for localised detection

2 x Tenenergy 10,000 mAh NiMH rechargeable batteries

1 x Intellicharger Newi2 charger with power cable

1 x Dwyger Instuments Minimaster flow meter

1 x 1/4" straight connector

1 x USB cable

1 x hard carry case

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Riello Model S3T 20 XTD T5 Lab Spares/Repairs

ITEM-38020

Riello Model S3T 20 XTD T5 Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, but we are unable to power it on as it was originally hard wired and as a result, it does not include a plug.

Therefore, it is listed as Spares/Repair and would require a plug attached to attempt to power it on.

£ 700.00 (ex. VAT) 1 in stock

Mitsubishi Freqrol - A500 Inverter Lab

ITEM-31520

Mitsubishi Freqrol - A500 Inverter Lab

Model: FR-A520-3. 7K

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

We are unable to test this item as it requires a connection to a larger system.

£ 700.00 (ex. VAT) 1 in stock

4 x APC Smart-UPS Line Interactive 2200VA Tower 230V Lab

ITEM-37183

4 x APC Smart-UPS Line Interactive 2200VA Tower 230V Lab

These items were removed from a university lab, where they were surplus to requirement.

All items are in very good cosmetic condition and powered up, all items display 0% Battery, therefore we are unable to test them further.

Model: Smart UPS 2200

£ 700.00 (ex. VAT) 1 in stock

Pfeiffer TCP040 Power Supply Lab

ITEM-41313

Pfeiffer TCP040 Power Supply

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, it is untested as we are unable to test it further at our facility.

Run Time: 10797.0

£ 700.00 (ex. VAT) 1 in stock

Dräger X-am 5100 Gas Analyser Lab

ITEM-41865

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 700.00 (ex. VAT) 1 in stock

Dräger Model X-am 5100 Gas Analyser Lab

ITEM-41866

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 700.00 (ex. VAT) 1 in stock

Dräger Type X-am 5100 Gas Analyser Lab

ITEM-41867

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 700.00 (ex. VAT) 1 in stock

Dräger X-am Model 5100 Gas Analyser Lab

ITEM-41868

Dräger X-am 5100 Gas Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

£ 600.00 (ex. VAT) 1 in stock

Leybold Heating Power Supply HU1 Lab

ITEM-36861

Leybold Heating Power Supply HU1

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

£ 600.00 (ex. VAT) 1 in stock

2 TEC Transformers 1 x 3.5 kva 3 phase 440v to 200v, 1 x 1.84 kva 240v to 115v

ITEM-37649

2 TEC Transformers 1 x 3.5 kva 3 phase 440v to 200v, 1 x 1.84 kva 240v to 115v

These items were removed from a university where they were surplus to requirement.

Both items are in good cosmetic condition.

The smaller 1.84 kVA transformer was tested and found to be operational with a 115-volt power tool on both outlets.

No testing was carried out on the larger transformer due to the higher voltage and internal hard-wiring required on the output.

Further details regarding each Transformer:

TEC 3.5kva three phase transformer

Serial No. APR133

Primary Volts 440 Secondary Volts 200

Input plug red Walther type 210 16 amps

Isolation switch

Supplies a very stable supply, designed for stepper motors, CNC machines, and servo equipment

Sits on four castors for easy movement

Dimensions L x W x H 48 x 46 x 41cms

Weight 75kg

TEC 1.84kva single phase transformer

Serial No. APR135

Primary Volts 240 Secondary Volts 115

Input plug blue 16amp 3-pin plug 200-250 volts

Dual output sockets Mennekes yellow 16amp 3-pin type 1362RS 100-130 volts

Dimensions L x W x H 34 x 21 x 29cms

Weight 30.1kg

£ 600.00 (ex. VAT) 1 in stock

Tufvassons 3 Phase Autotransformer Lab

ITEM-41472

Tufvassons 3 Phase Autotransformer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 600.00 (ex. VAT) 1 in stock

Heavy Duty Industrial Step Down Transformer 45KVA 425 volts to 208/218 volts

ITEM-42288

Heavy Duty Industrial Transformer 45KVA 425V to 208/218V

This item was removed from an industrial facility where it was surplus to requirements.

The transformer is in excellent cosmetic condition, we are unable to conduct further testing at our facility.

It is reported by the previous owner as fully functional and was used to power an industrial machine running on American mains voltage and frequency. A 63A 3-phase socket is required for operation.

Specifications:

Model: Heavy Duty Industrial Transformer
Serial No.: 10120894
Input Voltage: 415/425/435V
Input Current: 62.6A
Output Voltage: 208/218V
Output Current: 124.9A
Power Rating: 45KVA
Frequency: 50/60Hz
Duty Cycle: Continuous
Insulation Class: F-155 (Ambient 30˚C)
Compliance: BS EN 61558, CE Mark

Features:

Fitted with a 5-pin red 63A-6h plug on a 16mm² cable
Heavy-duty 25mm² 4-wire output cable with eyelet ends
Mounted on four castors for mobility

£ 580.00 (ex. VAT) 1 in stock

Anritsu Pulse Pattern Generator MP1652A - M34976 Lab

ITEM-25563

This Anritsu Pulse Pattern Generator MP1652A - M34976 was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. The fans are operational and all LCD screens are working. All knobs buttons and dials move freely and are responsive.

£ 580.00 (ex. VAT) 1 in stock

Eurotherm Drives 620 Series Vector Link Model - 620STD

ITEM-27556

Eurotherm Drives 620 Series Vector

Model - 620STD/0007/400/0010/UK/ENW/0000/000/B1/000/000

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in reasonable cosmetic condition but has marks from use.

£ 555.00 (ex. VAT) 1 in stock

Axon Instruments CyberAmp 380 Programmable Signal Conditioner Amplifier Lab

ITEM-31835

Axon Instruments CyberAmp 380 Programmable Signal Conditioner Amplifier

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility.

It is in good cosmetic condition with minor marks from use.

£ 550.00 (ex. VAT) 1 in stock

PBF PRA100M3 Power Supply

ITEM-34639

This PBF PRA100M3 Power Supply was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks from use but has not been tested.

£ 500.00 (ex. VAT) 1 in stock

Spellman Power Supply RSBX30X3077 Lab

ITEM-34855

Spellman Power Supply RSBX30X3077

Model: RSBX30X3077

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we are unable to test it at our facility.

Includes 9-pin FEMALE DIN Cable.

£ 500.00 (ex. VAT) 1 in stock

Paar DMA 35 Density Meter Kit Lab

ITEM-41972

Paar DMA 35 Density Meter Kit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

It was tested with a 9-volt 6LR61 test battery, this is not included in the sale.

The kit consists of:

1 x Density meter

1 x Sanitex Eternal-Matic 2ml filling syringe

1 x Calibration screwdriver

1 x Wrist strap

1 x Original Hard plastic carry case

£ 495.00 (ex. VAT) 1 in stock

Anritsu Error Detector MP1653A Model M30278 Lab

ITEM-25566

This Anritsu Error Detector MP1653A Model M30278 was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are some tape and scuff marks from general use.

All buttons and dials are moving freely and appear responsive. The fans are operational.

£ 485.00 (ex. VAT) 1 in stock

22 x High Perfection LP1090-36-GG-290 36V DC Power Supplies

ITEM-25661

22 x High Perfection LP1090-36-GG-290

These were removed from a university lab where they were surplus to requirements.

The units are all inside open boxes and are all in good cosmetic condition.

We were unable to test them

Model LP1090-36-GG-290

Part No. 20-3406 REV: A

Power supply dims:

L32cm x W6cm, x H4cm

NEW ITEM

£ 400.00 (ex. VAT) 1 in stock

Mettler Toledo FiveEasy F30 Conductivity Meter Lab

ITEM-37203

Mettler Toledo FiveEasy F30 Conductivity Meter Lab

This item was removed from a university where it was surplus to requirement.

The Mettler Toledo FiveEasy F30 is brand new in its original packaging, with one additional part being opened as stated below.

Included are:

Mettler Toledo FiveEasy F30 - Brand New.
LE Sensors Cat no. 51340335 - Opened/Excellent Condition.
The five series operating & installation instructions cd - Brand New.
12V Power supply with adaptors - Brand New.

£ 360.00 (ex. VAT) 1 in stock

High Voltage Power Supply Units - Spellman Part no. X3230 - XSTAR - 1505S24HN

ITEM-27573

High Voltage Power Supply Units - Spellman Part no. X3230 - XSTAR - 1505S24HN

These were removed from another system.

None of the items have been tested.

Included are;

Martek Power 1505S24HN

Spellman Part no. X3230

SN - 49942-1-A00371

2 X STAR

063003

4339888 B

£ 360.00 (ex. VAT) 1 in stock

Solartron Schlumberger 7060 Systems Voltmeter Lab

ITEM-36721

This Solartron Schlumberger 7060 Systems Voltmeter was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further.

It is in good cosmetic condition with marks from use.

£ 355.00 (ex. VAT) 1 in stock

Thorlabs MDT690 3-Axis Piezo Controller Lab

ITEM-30268

This Thorlabs MDT690 3-Axis Piezo Controller was removed from a university lab where it was surplus to requirements.

The unit powers up but was not tested further.

£ 315.00 (ex. VAT) 1 in stock

JDS SB Series Fiber Optic Switch Part No. SB16B5-C0FA Lab

ITEM-28389

This JDS SB Series Fiber Optic Switch Part No. SB16B5-C0FA was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with marks from use.

Included with ti are;

17x Fiber Optic Cables:

1x - 05/97 TB II

4x - 06/97 TB II

5x - 09/97 TB II

1x - 10/97 TB II

6x - 12/97 TB II

Length - 319cm

The units are in good cosmetic condition.

£ 300.00 (ex. VAT) 1 in stock

Lasos HeNe San 7460 Laser Power Supply Lab

ITEM-14235

Lasos San 7460 HeNe Laser Power Supply.

This item was removed from a lab during a clear out.

Lasos SAN 7460A.

Unit powers up.

It has not been tested any further.

Includes keys.

Unit was last tested Sept 2020.

Next test isn't due until 2020.

Unit is in good cosmetic condition.

Please see photos for further details.

Electronics & Electrical Engineering

Filters