Fume Cabinets
Items 1 to 19 of 19
NEW ITEM
NEW ITEM
£ 5,000.00 (ex. VAT) 1 in stock
Clean Air Recirculating Fume Cupboard with Water Filtration System Lab
ITEM-29713
This Clean Air Recirculating Fume Cupboard System was removed from a university lab where it was surplus to requirements.
The unit is new and unused though it has been in storage for some time and picked up some cosmetic marks. It has never been commissioned and was never collected from the manufacturer by the client.
The item powered on and was tested. All sockets/lights/screens were checked & are working. The system would not run fans as requires calibration.
It seems that it does not have typical HEPA filters, the air goes into the large black tank where it is sprinkled down by water jets and then the air is ducted away from the top of the black tank and out of the room/lab.
The tank sits vertically but is laid on its side in our warehouse as it is too tall and difficult to move.
Included with it are;
1 x Crest Pump Model Type: AMX441 GG.
1 x Unbranded Filtration Tank & Ducting.
£ 1,750.00 (ex. VAT) 1 in stock
Safelab Systems Airone 1200-GS Filtration Fume Cupboard Lab
ITEM-34929
This Safelab Systems Airone 1200-GS Filtration Fume Cupboard was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order.
It is in good cosmetic condition ith some marks from use.
Base frame size - L120 W76 H90cm
£ 1,655.00 (ex. VAT) 1 in stock
Labcaire Special Downflow Laboratory Workstation Bench Lab
ITEM-32031
This Labcaire Special Downflow Laboratory Workstation Bench was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order.
It is in good cosmetic condition with minor marks from use.
Workstation Surface - 100 x 75cm
£ 1,650.00 (ex. VAT) 1 in stock
Semper Filtration Fume Cupboard & Washing Facility Lab
ITEM-34571
This Semper Filtration Fume Cupboard & Washing Facility was removed from a university lab where it was surplus to requirements.
The system powers up and shows airflow working on both sides of the cabinet. The Semper Formalin Vapouriser Units on both sides of cabinet did not power on.
It is in good cosmetic condition with minor marks from use.
Internal dimensions are: L 72cm x W 49cm x H 138cm. (each side).
£ 1,545.00 (ex. VAT) 1 in stock
Safelab Airone - R Recirculating Fume Cabinet Model - Airone 1200R Lab
ITEM-31125
Safelab Airone - R Recirculating Fume Cabinet Model - Airone 1200R
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order.
It is in reasonably good cosmetic condition with minor marks from use. The inside is a bit stained and could do with a deep clean.
Internal Dimensions - D61 W104 H85cm
£ 1,340.00 (ex. VAT) 1 in stock
Safelab AirOne 1200-R Fume Filtration Cabinet Lab
ITEM-29707
This Safelab AirOne 1200-R Fume Filtration Cabinet was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order.
It is in very good cosmetic condition with only minor marks from use. It was supplied to us without the base unit.
Internal dimensions are D 61cm x W 115cm x H 64cm.
£ 1,080.00 (ex. VAT) 1 in stock
Labcaire Aura 250E Ductless Fume Hood Lab
ITEM-31123
This Labcaire Aura 250E Ductless Fume Hood was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order but requires a new filter.
It is in good cosmetic condition with minor marks from use.
Internal Dimensions - D68 W74 H78cm
£ 1,000.00 (ex. VAT) 1 in stock
Astec Microflow Monair Fume Hood BFCS-002 Lab
ITEM-31136
This Astec Microflow Monair Fume Hood BFCS-002 was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks from use.
Internal dimensions - D50 W58 H50.5cm
£ 945.00 (ex. VAT) 1 in stock
Air Science DWS 48 Ductless Fume Hood Workstation Lab
ITEM-32030
This Air Science DWS 48 Ductless Fume Hood Workstation was removed from a university lab where it was surplus to requirements.
The unit powers up and the light and airflow are in good working order.
The item is in a good, used cosmetic condition.
Work area 122 x 50cm
£ 785.00 (ex. VAT) 1 in stock
Esco Laboratory Fume Hood SPD-3A1 Lab
ITEM-31527
This Esco Laboratory Fume Hood SPD-3A1 was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order but displays an error - "ERR.CALIB". The manual says ERR.CALIB will be displayed if the airflow velocity sensor is not yet calibrated.
It is in good cosmetic condition with minor marks from use.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 760.00 (ex. VAT) 1 in stock
Remploy Furniture SSR2000 Sliding Sash Recirculating Mobile Fume Cupboard
ITEM-31711
This Remploy Furniture SSR2000 Sliding Sash Recirculating Mobile Fume Cupboard was removed from a university lab where it was surplus to requirements.
The unit has failed PAT testing on insulation. It is not in safe working condition.
It is in otherwise good cosmetic condition with marks from use.
Internal workspace dimensions - D57 W91 H98cm
Bottom right compartment internal dimensions - L69 W40 H52cm
It is sold for spares/repairs as it will need its electrical issues rectified before it can be used safely.
£ 690.00 (ex. VAT) 1 in stock
Captair Ductless Filtration System Type 5000 C Lab
ITEM-27501
This Captair Ductless Filtration System Type 5000 C was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order. It is in reasonable cosmetic condition with marks form use.
Carbon Filter inside - Type C-100
Size - 755 x 405 x 100mm
Unit size - L81 W45 H33cm
£ 660.00 (ex. VAT) 1 in stock
Astec Monair Plus Recirculating Fume Cabinet Lab
ITEM-31124
This Astec Monair Plus Recirculating Fume Cabinet was removed from a university lab where it was surplus to requirements.
The unit powers up and is working, but all the alarms go off. The Airflow, Filter & Alarm lights all show red.
It is in good cosmetic condition with minor marks from use.
Internal Dimensions - D64 W96 H80cm
£ 615.00 (ex. VAT) 1 in stock
Semper SP Filtration Fume Cupboard Swab Drying Cabinet Lab
ITEM-34613
This Semper SP Filtration Fume Cupboard was removed from a university lab where it was surplus to requirements.
The unit powers up and appears to be in working order. It reached 20˚C inside during testing.
It is in good cosmetic condition with minor marks from use.
it comes with
2 x 272-867 RS 60w tubular heaters.
1 x Manual.
There is no key included.
£ 585.00 (ex. VAT) 1 in stock
Solotec Scientific Waysafe WS110/T Minicab Fume Hood Lab
ITEM-31950
This Solotec Scientific Waysafe WS110/T Minicab Fume Hood was removed from a university lab where it was surplus to requirements.
The unit powers up and is in reasonably good cosmetic condition with marks from use.
Internal dimensions - L58 W50 H48cm
£ 190.00 (ex. VAT) 1 in stock
Gelaire Flow Laboratories HF72 Fume Cupboard Lab
ITEM-29749
This Gelaire Flow Laboratories HF72 Fume Cupboard was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order.
It is in reasonably good cosmetic condition but has some damage to the base. It is purely cosmetic.
Internal dimensions are: L179cm x D60cm x H74cm.
£ POA 1 in stock
Bigneat Chemcap BC8004/01 Ductless Fume Cabinet
ITEM-36697
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Remploy Furniture Portable Fume Hood
ITEM-31710
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
ASTEC Sensair BFC-10 Fume Hood with Cabinet
ITEM-29901
This item is new in stock. Please enquire for further details.
Items 1 to 19 of 19