Heavy Equipment
Items 1 to 12 of 12

£ 55,120.00 (ex. VAT) 1 in stock
International Metrology Systems MS Impact Coordinate Measuring Machine Lab
ITEM-23978
International Metrology Systems MS Impact Coordinate Measuring Machine
This was removed from a university lab where it was surplus to requirements.
We were unable to test it at our facility but the lab confirmed that it was working prior to removal.
It has a Renishaw Probe Head Controller PHC10-2 and Virtual-DMIS Version 3.2 and Version 4.0 software discs which run it.

£ 30,000.00 (ex. VAT) 1 in stock
Knapp Open Shuttle OS100B Flexible Autotomous Robotic Warehouse Shuttle
ITEM-31707
This Knapp Open Shuttle OS100B Flexible Autotomous Robotic Warehouse Shuttle is being sold on behalf of a client. It is surplus to requirements.
The unit is in excellent cosmetic condition and has only seen <50h of use.
Technical information about the Knapp Open Shuttle OS100B:
- Speed: Up to 1.6 m/s (safe)
- Max. Acceleration: 1,0m/s²
- Minimum turn radius: 360° turn at standstill
- Delivery: both front and rear possible
- Container dimensions: Up to 800 mm x 600 mm
- Optional integrated lift (550 mm to 1,500 mm)
- Maximum load: 100 kg
- Battery life: Over 6 hours, continuous operation
- Charging time: Approximately 60 minutes (charge ratio > 1:6)
- Conveyor top edge: 500 mm to 1,000 mm
- Protection class: IP20
- Battery: LiFePo4 (lithium iron phosphate)
- Communication method: WLAN (b/g/n standard) in 5GHz range
- Dead weight: 130kg
Collection only from Hanau, Germany.

£ 8,000.00 (ex. VAT) 1 in stock
Hare 50TUP4C Hydraulic Press
ITEM-34730
This Hare 50TUP4C Hydraulic Press was removed from a university workshop where it was surplus to requirements.
The unit was previously hard wired so a plug was fitted for testing.
The screen is working.
External plugs are working. (plug tester not included)
SICK Light curtain is working.
The heaters are working.
Bed dimensions are: L 60cm x W 60cm x H 48cm.
The control key is supplied, but the side panel key is missing.
It is in good cosmetic condition with marks from use.

£ 5,775.00 (ex. VAT) 1 in stock
SC Technical Services HP 500 HT-IR Heated IR UV Curing Conveyor Dryer Unit
ITEM-30211
SC Technical Services HP 500 HT-IR Heated IR UV Curing Conveyor Dryer Unit
This was removed from a university workshop where it was surplus to requirements.
The unit was confirmed as in working order with thermal (up to 130°C), IR and UV curing capabilities. It needs some maintenance and will likely need repair in the future.
The unit itself is 3m in length approximately 1.5m wide and 1.2m high and requires a three-phase electrical supply and ducted extraction to run.
Maintenance required – replace seals around oven lid and change UV bulb
Future repair – motors are in sealed (riveted) ducts and the bearings are worn and will need attention at some point.
There are no manuals included but the client has offered to demonstrate how to use it if required.

£ 690.00 (ex. VAT) 1 in stock
Siemens RM 2028669/01 TD30 Heavy Duty Solar Tracker Mount
ITEM-25818
This Siemens RM 2028669/01 TD30 Heavy Duty Solar Tracker Mount was removed from a university lab where it was surplus to requirements.
The university acquired it to make a bespoke heavy-duty solar tracker. They said they think it had been used previously as a pivot and tilt mount.
It is in very good cosmetic condition with some minor marks from use.

£ 650.00 (ex. VAT) 1 in stock
Norton Clipper Major EDW 3 Masonry Saw
ITEM-34589
Norton Clipper Major EDW 3 Masonry Saw
This was removed from a university workshop where it was surplus to requirements.
The unit powers up and is in good working order.
Bed dimensions are: L 53cm x W 38cm.
Maximum Spindle Speed 2700 RPM.
No blade is fitted.

£ 645.00 (ex. VAT) 1 in stock
Staffa Motor Demonstration Rig
ITEM-25817
This Staffa Motor Demonstration Rig was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition but has not been tested.
The conduit to the start/stop button has split and needs replacing before this can be used. We were advised there is hydraulic fluid in the tank.
The parts which make up the rig are as follows:
1x GEC Small Machines Alpak Induction Motor
No. BH18634102
1x Vickers 2ALMUH760EN76
1x Vickers Model: HM/C030Z/17/S03/G1/30/PL315
S/N: J 93PM5021
1x Fawcett Engineering Model: C 167E14 - 44
S/N: C2707
1x Truninger AG Type: QT42 - 025
S/N: 221117
1x Servotel Controls Part no. 12/16811
S/N: P272
Also included are the following:
2x Cables with coupler connectors
1x Box of coupler connectors, mixed sizes and conditions
1x Dual Displacement Series diagram
1x Staff hydraulic motors catalogue
1x Valve manual on projection foil
1x Hydraulic copying control diagram
1x Manual
1x Fluid motor circuit diagrams
1x Fluid power circuit diagrams
1x CompAir International Air Cylinders catalogue

£ POA 1 in stock
R.D.P.-Howden Hydraulic Press & Pump
ITEM-34588
This item is new in stock. Please enquire for further details.

£ POA 1 in stock
Denison 150 Ton Model No: T.I.B/M.C Hydraulic Screw Press
ITEM-34587
This item is new in stock. Please enquire for further details.

£ POA 1 in stock
Pearce Compaction Systems Mobile Waste Compactor Model MCW32 - Spares/Repairs
ITEM-31689
Pearce Compaction Systems Mobile Waste Compactor Model MCW32 - Spares/Repairs
This is being sold on behalf of a client. It is surplus to requirements.
Collection only from the Warwick area.
Approx size 6.4m x 2.1m x 2.4m
The unit requires a repair to the hopper dampener. It is sold for spares/repairs.

£ POA 1 in stock
MOOVMOR Engineering Ltd SkipPaker 14 Waste Compactor
ITEM-31688
MOOVMOR Engineering Ltd SkipPaker 14 Waste Compactor
This is being sold on behalf of a client. It is surplus to requirements.
Collection only from the Warwick area.
Approx Measurements - 4.2m x 1.75m x 2.1m

£ POA 1 in stock
Pearce Compaction Systems Large Industrial Mobile Waste Compactor Model MCW32
ITEM-31687
This is being sold on behalf of a client. It is surplus to requirements.
Collection only from the Warwick area.
Approx size 6.4m x 2.1m x 2.4m
Items 1 to 12 of 12