GE Healthcare AKTAready Single-Use Chromatography FPLC System

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility.

It is in good cosmetic condition with minor marks from use.

Includedis box containing the following parts:-

1 x Pneumatic Air Supply Hose

1 x System Computer Cable

2 Bags of Clamps (3 per bag)

2 x Sealed Packs of tubing

1 x USB Cable

1 x Service Key

9 x Packs of GE PN-18-1112-51 (2 per pack)

1 x GE RJ45 Coupler PN-56-3274-14

1 x GE Cooling Collars (A+B) PN-19-7825-01

10 x Omnifit 2.0mm Peek Barbed Adaptors

5 x Omnifit Adaptor to female luer (Cat no. 002502)

1 x Assure Plus 3 1/4" x 6 1/2" (Cat no. 83000)

This was removed from a university lab where it was surplus to requirements. The lab informed us that it was in use until December 2022 and was fully serviced by Waters up to Feb 2023.

All modules are in excellent cosmetic condition with only minor marks from use.

Included are;

1 x Waters Sampler Manager

Part Number: 186016007

S/N: J10NPS 788M

The unit powers up but we were unable to test it further at our facility. This unit does include 2x part number 418000179 vile trays. 

1 x Waters Binary Solvent Manager

Part Number: 186016002

S/N: H10NPB 923N

The unit powers up, the flow light flashes red, green, and then turns off. We were unable to test it further at our facility.

1 x Waters Auxiliary Solvent Manager

Part Number: 186016021

S/N: H10NPA 505N

The unit powers up but the flow light does the same as the binary manager. We were unable to test it further at our facility.

There is also a network switch on the top of the stack. It is untested.

It comes with

5x sealed bagged "nano inlet filter 5 micron", part number: 289002172 with dates on the bags ranging from 2011 to 2020.

A set of bagged tubes that are labelled as "solvent aux".

This item is new in stock. Please enquire for further details.

This Thermo Scientific Accela HPLC System was removed from a university lab where it was surplus to requirements.

The system powers up but has not been tested further at our facility.

The system is in very good cosmetic condition with only minor marks from use.

Included are;

1 x Thermo Scientific Accela PDA Detector.

1 x Thermo Scientific Accela Autosampler.

1 x Thermo Scientific 1250 Pump.

Set of Accessories

This Biotage Jones Chromatography Flashmaster II System was removed from a university lab where it was surplus to requirements.

The unit powers on and is in very good cosmetic condition. It has not been tested further at our facility.

There is some chipped paint along the top of the unit and scuffs and scratches from general use.

This Waters Alliance HPLC System was removed from a university lab where it was surplus to requirements.

The lab believe it was in working order when last used, but has stood for 10 years unused.

All the modules powered up but we were unable to test them further at our facility. The system is in reasonably good cosmetic condition with marks and stains.

Included in the system are;

1 x Waters 2695 Separations Module

1 x Waters Scanning Fluorescence Detector

1 x Waters 486 Tunable Absorbance Detector

1 x PC (Windows XP) Running Millennium Software.

Manuals;

1 x Waters instruction manual

1 x Chromquest 4.2 manual

Various books associated with the Item.

A selection of spare parts.

Shimadzu Prominence HPLC System - DGU-20A5 - LC20-AT - SPD-20A w/ Software

This was removed from a university lab where it was surplus to requirements.

The system is working but we were told that is has been unused for the past 2-3 years but does have all the required accessories and software. It can be a bit temperamental and the last time it was used for teaching it was prone to air bubbles and occasional pressure problems, but likely just needs a service.

Included are;

Model - Reservoir Tray

Cat no. 228-45041-91

SN - L20304303756

Prominence Degasser

Model - DGU-20A5

Cat no. 228-45019-32

SN - L20244301963

Powers on

Prominence Liquid Chromatograph

Model - LC-20AT

Cat no. 228-45001-38

SN - L20114370128

Powers on

Door doesn't close properly

Prominence UV/VIS Detector

Model - SPD-20A

Cat no. 228-45003-38

SN - L20134303055

Powers on

Door hinge is broken so it doesn't stay on

Manuals/Software:-

LabSolutions LCsolution Release 1.21 SP1

USB Dongle LCsolution Multi-LC (SN-L51254300014S7)

Shimadzu UV-1650PC Instruction Manual

Shimadzu User Authentication Tool Instruction Manual

Shimadzu Gradient Valve Kit for LC-20AD/20AT Installation Manual

Shimadzu HPLC LC Workstation Administration Manual

Shimadzu HPLC LC Workstation Operation Manual

Shimadzu LCsolution LC-Assist Version 2.1 Instruction Manual

Shimadzu LCsolution QCTool Manual

Shimadzu LCsolution Version 1.2 Software Release Notes

Shimadzu LCsolution Chromatography Data System Quick Manual

Shimadzu On-line Degasser DGU-20A3/DGU-20A5 Prominence Manual

Shimadzu Solvent Delivery Module LC-20AT Prominence Manual

Shimadzu UV/VIS Detector SPD-20A/SPD-20AV Prominence Manual

Mix of Syringes/Columns:-

Hichrom Inertsil ODS2

Hamilton Micro Syringe

2 x Hamilton 1002RN Syringe 2.5ml

Hamilton Rheodyne Valve 50ul Syringe

SGE Rheodyne Valve 50ul Syringe

Shimadzu Pathfiner HPLC Column

Other bits include:-

Raco case full of small parts including tubing, clamps, tools etc.

This Finnigan Trace GC Ultra & AS2000 Autosampler was removed from a university lab where it was surplus to requirements.

The unit is in good used cosmetic condition. It powers up fine and the oven heats.

The fan is very very noisy. We presume the bearings have gone in it.

It also comes with a Thermo Finnigan AS2000 Autosampler and C.U. Controller. The controller powers up.

Various cables are also included including a spare fan.

This Waters Alliance HPLC System is being sold on behalf of a UK university.

It was removed from a lab in working order, and then serviced by an engineer at our site.

Engineers report is as below:

The flow motor was checked on the A, B, C & D lines. The proportional valve was confirmed as working. The degasser was working at 0.9PSIA. The FLD switches on and the lamp works. The Micromass ZQ switches on with no issues but will require a foreline pump such as an Edwards 28. The HPLC vial chiller and column heater are both working ok.

The system has no notable defects but will require Micromass Mass Lynx software before it can be used. It is a clean system with no issues.

Our team also made some notes on the parts list which are as below:

The system consists of;

1 x Waters 474 Scanning Fluorescence Detector.

1 x Rheodyne MX7900-000. (has some cracks on the underside casing)

1 x Waters 2996 Photodiode Array Detector.

1 x Waters 2965 Seperation Module.

1 x Micromass ZQ.

1 x Agilent 82357B Cable.

1 x Grey Plastic Tray With Funnel.

1 x Deep Dark Grey Tray (2 Clips Snapped Off).

2 x Tubes with T Connection Batch No: 8015AR

Multiple Accessories and Cables.

No further tests were carried out but system should be in good working order and will be sold with 45-day return to base warranty.

Buyers will require an appropriate foreline pump and MassLynx software

Hitachi Transgenomic Wave L-7000 Series DHPLC System

This was removed from a university lab where it was surplus to requirements.

All units power up but have not been tested further as they require connection to a PC with software.

Included are;

Transgenomic/Hitachi L-7400 UV Detector

Model: L-7400

Part#: 810-0401

Serial#: 1147-080

Transgenomic/Hitachi L-7300 Column Oven

Model: L-7300

Part#: 810-0301

Serial#: 1153-014

Transgenomic/Hitachi L-7200 Auto Sampler

Model: L-7200

Part#: 810-0201

Serial#: 1154-136

Transgenomic/Hitachi L-7200 Chiller

Model: L-7200 ACC

Part#: 810-3301

Serial#: 1134-036

Transgenomic/Hitachi L-7100 Pump

Model: L-7100

Part#: 810-0101

Serial#: 1153-228

Transgenomic/Hitachi D-7000 Interface

Model: D-7000IF

Part#: 810-0091

Serial#: 1124-131

ERC Inc Hitachi L-761 Pump Drive Unit/Degasser

Model: L-761

Serial#: 102895N0775

Additional items included:

Transgenomic Wave Ineractive Help System CD

Part#: 6700002

Transgenomic Wave System Software Accessories CD

Part#: 6700006

Transgenomic Wave System Software Accessories CD

Part#: 6700005

Transgenomic Manual Binder x 2

Perkin Elmer Series 200 HPLC System

This was removed from a university lab where it was surplus to requirements.

The system powered up but we were unable to test it further at our facility. It is in good cosmetic condition but has marks from use.

Included are as follows;

Perkin Elmer Series 200 Autosampler

Model#: 200 LC Autosampler

Serial#: 293N9022603

Perkin Elmer Series 200 Peltier Column Oven

Model#: Series 200 Peltier Column Oven

Serial#: 0VI000915343

Perkin Elmer 785A UV/VIS Detector

Model#: 785A/CORAD

Serial#: 007N8102402

Perkin Elmer 600 Series LINK Chromatography Interface

Model#: Series 600 LINK

Serial#: 600M01030350

Perkin Elmer 900 Series Interface

Model#: 950A

Serial#: 7007251572

Perkin Elmer Series 200 Vacuum Degasser

Model#: Series 200

Serial#: 5544

Perkin Elmer Series 200 Vacuum Degasser

Model#: Series 200

Serial#: 1672

Dell Optiplex 760

Model#: DCNE

Serial#: 3JCLD4J

The unit has TotalChrom Navigator software installed with login details provided.

AOC 913SN LCD Monitor + Keyboard & Mouse

Model#: TFT185W80PS

Serial#: 741A1BA001617

Manuals;

-Series 200 Column Oven and Peltier Column Oven

-TotalChrom Tutorial for Version 6.3

-Chromlab 51 Ways to Make TotalChrom Work for You!

-Series 200 Vacuum Degasser

-Intruction Manual for VACUUM OVENS

-Series 200 Autosampler

-Model 785A

-Series 200 LC Pump

This Biotage SP1 Flash Chromatography System was removed from a university lab where it was surplus to requirements.

The unit powers up but the monitor is faulty. We connected it to an external monitor and were able to power up the system and access the software. The battery for the motherboard with likely need replacing at some point.

The system is comprised of the following modules.

1 x Biotage SPXE 10810016;

1 x Ecom Fixed Wavelength UV Detector ;

1 x Biotage SP1 System & Monitor.

This item is new in stock. Please enquire for further details.

This Waters Alliance 2965 / Micromass Quattro Micro QAA117 System was removed from a university lab where it was surplus to requirements.

We had an engineer review the system who reported the following:

Date:     05/04/22                     

Micromass Quattro Micro API. Mass range 2-2000 m/2

Good for reaction monitoring lab drug kenetics

Micromass software is MassLynx

Waters Alliance 2695

Loop vol 100ul

Column Heater

Vial Chiller 4-40˚C

Degasser

----

System switches on - no faults seen. Front end clean. System ready to go. Will require a frontline pump like an Edwards 28.

Pump motor checked in lines ABCD - working - flow not measured. proportioning valve working.

Degasser repaired. Was stuck, now working to 0.7PSIA.

Vial compartment selection working

Vial chiller working down to 4˚C

Sealwash working

Needle wash working

Injection tower working

V1, V2, V3 valves all working.

Are there any notable defects, and if so, can these be rectified?

Degasser stuck - but has now been fixed

V1 & V2 valves have been repaired previously but seem ok.

Seal pack injector seems to be leaking and will need seals replaced.

V1 tubing - needs replacement or just tightening and cleaning up.

Injection pack needs metal tubing and pump out to quat valve.

----

At the time of writing, we are awaiting the minor repairs mentioned above to be completed, but it will be complete prior to the system being dispatched.

Regarding software, the PC has Masslynx v4.1 on it. The PC also has Empower installed but unfortunately we don't have the login so that won't be useable.

As above, a suitable vacuum pump will be required - please ask if you need a quote.

----

Our team then carried out an assessment of the parts that were included:

The lot Contains:

1 x Waters 2965 Separation Module.

The unit is in reasonably good cosmetic condition with marks from use. It powers up but has not been tested further.

1 x Micromass Quattro Micro QAA117.

The unit is in reasonably good cosmetic condition with marks from use. It powers up but has not been tested further.

1 x Buffalo DVSM-PT58U2V Disc Tray.

The unit is in a good used condition but also has some kind of epoxy resin on it. It powers up but hasn't been tested further.

1 x Acer Veriton M288 PC, Keyboard & Monitor.

The unit is in good cosmetic condition with some marks from use. We have removed everything apart from the software including passwords.

It has MassLynx V4.1. software on it which launches. It also has Empower but it requires a username and password we don't have.

2 x Tubes with T Connection Batch No: 8015AR.

1 x Lab Alliance P/N 050106.

1 x Waters Assembly Diffuser.

1 x Esa P/N 55-044B.

1 x GlobTek ITE Power Supply.

1 x Hichrom HIRPB-6372.

Other Multiple Accessories and Cables.

System will come with a 45-day return to base warranty.

This Thermo Scientific Surveyor HPLC System was removed from a university lab where it was surplus to requirements.

Included are;

1 x Autosampler

Part no. SRVYR-AS

1 x MS Pump

Part no. SRVYR-MPUMP

1 x PDA Plus Detector

Part no. SRVYR-PDA5P

All the components power up but have not been tested further. They are in reasonably good cosmetic condition but have marks from use.

This Costech Instruments Elemental Combustion GC Gas Chromatography System  ECS4010 was removed from a university lab where it was surplus to requirements.

The item powers on but has not been tested any further. The lab it was removed from did inform us that most of the equipment removed from the particular lab was in working order.

The item is mostly in a reasonable, used cosmetic condition but the right side panel is missing and the back panel is loose.

There is a manual included.

This Dionex ASE Accelerated Solvent Extractor Model - ASE 200 was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks from use.

This Perkin Elmer Series 200 HPLC System was removed from a university lab where it was surplus to requirements.

All modules power up but we were unable to test them further at our facility.

The system is in good cosmetic condition with some marks from use.

Included are;

Perkin Elmer series 200 Autosampler

Sn. 293N8060506

Pn. N2930100

Perkin Elmer series 200 Vacuum Degasser

Sn. 1101002

Pn. N2600531

Perkin Elmer series 200 LC Pump

Sn. 291N7081802

Pn. N2910102