Iveco Eurocargo 75-160 7.5T Box Van with Cantilever Tail Lift – Euro 6 – 186,290 Miles

This vehicle is offered in good used condition, both internally and externally, having been maintained and regularly inspected.

Vehicle Overview

• Make/Model: Iveco Eurocargo 75-160
• Gross Weight: 7.5 Ton
• Emissions: Euro 6
• VIN: ZCFA775B602688229
• Mileage: 186,290 miles

Condition

The vehicle presents well for its age and mileage, with a clean cab and body. It has been in active service and shows typical signs of use, but nothing outside of normal wear expected for a commercial vehicle of this type.

Maintenance & Inspection History

• Last serviced: 29/01/2026
• Tail lift inspection: 11/02/2026
• Tachograph calibration: 13/02/2026
• Brake test: 04/03/2026
• MoT: 11/03/2026

Tyre Condition

• Front tyres: approx. 13mm tread
• Rear tyres: approx. 11mm tread

Tail Lift Specification

• Type: Cantilever tail lift
• Platform size: 170cm (L) x 240cm (W)
• Load capacity: 1000kg

Body Dimensions

• Internal length: 6 metres
• Internal width: 241cm
• Internal height: 242cm
• Rear door opening: 223cm (W) x 224cm (H)

Additional Information

• Supplied with 1 ignition key and 2 fuel keys

ProBike Fuchs BEI261 Motorbike Dynamometer (Dyno) w/ Fuchs Dyno software

This system was removed from a facility where it was surplus to requirements.

The previous owner stated that the unit is a motorcycle dynamometer in nearly new condition and almost unused. They also advised that the software is out of date, but that the system is otherwise working.

Cosmetically, we would describe the overall condition as good, with some signs of use and light rusting present, which is to be expected given the nature of the equipment. The unit is split down and palletised and, as such, we were unable to test the dynamometer as a complete system. However, the Hydrovane pump was able to be powered on and has passed PAT testing.

For reference, ProBike state that they offer upgrade and installation packages for Fuchs BEI261 dynamometers, including hardware/software upgrades and support for reinstallations, updates and spare parts.

Included Components:

• Main body
• Glass panel sides
• Rear ramp (attaches to rear)
• Head unit (sits on top; houses PC system — PC not included)
• Roller / motor
• Eddy current brake (BEI261 model feature)
• Brackets and air hood (see pictures)
• Large Hydrovane pump

• PC - Dell Dimension 2400 w/ Fuchs Dyno software
• Monitor - LG 19"
• Dell keyboard
• HP Mouse
• VGA Cable
• Comms cable

Dedotec Dedocool COOL T3 Lighting System

This was removed from a university lab where it was surplus to requirements

The unit powers up and is in good working order.

Job Lot of 6 x Walker All In One Fumigation Units Lab

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included is the following:

6 x Walker All In One Fumigation Units

Job Lot of 62 x Poly Edge B20 Telephone

This job lot of items comes from a facility where they were surplus to requirement.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included;

• 42 Complete Sets
• 20 Without Keypad Stands

MTD Snow Thrower – Model 31B-32AD678

This item was removed from a facility where it was surplus to requirements.

The machine is in good cosmetic condition with typical signs of previous use. The unit has not been tested, as there is residual fuel and oil present, so we have not attempted to start or run the engine.

Please note: The tyres are currently under-inflated.

Job Lot of 14 x Janome Sewing Machines

This job lot of items comes from a facility where they were surplus to requirement.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Job lot includes:

10 x Janome Memory Craft 350E Sewing Machines

• All come with soft carry cases
• Only one comes with a power cable

4 x Janome 419SLE Limited Edition Sewing Machines

• All come with a hard carry case
• 3x come with a foot pedal/power cable

Bernina Activa 230 Patchwork Edition Sewing Machine w/ Carry Bag & Accessories

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 04/2018